Instruction/ maintenance manual of the product JC-199APB Hanns.G
Go to page of 14
Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your disp lay is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
Recycling Information We, the HannStar Display Corp. care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of i ndustrial technology devices at the end-of-life.
Operation Instructions Thank you for purchasing this monitor, a high-resolution multi-scan color monitor. Please read this guide thoroughly before installation.
Content Safety Prec autions ............................................................................. 1 First Se tup ......................................................................................... 2 Quick Insta llation ..................
Safety Precautions This monitor is manufactured and tested on a ground principle that a user ’s safety comes first. However , improper use or installation may result danger to the monitor as well as to the user . Carefully go over the following W ARNINGS before inst allation and keep this guide handy .
First Setup Congratulation for purchasing this monitor of high performance! This monitor comes with the following accessories : Power cable. D-Sub cable (15 pin) Audio cable. User guide. Quick Installation 1. Connect video cable (D-Sub cable) Make sure both monitor and computer are powered OFF .
Front View of the Product ➊ ➋ ➌ ➍ ➎ ➏ ➊ OSD TURN ON/OFF ➍ C O N F I R M S E L E C T I O N ➋ SCROLL DOWN/DECREASE ➎ POWER ON/OFF ➌ SCROLL UP/INCREASE ➏ LED INDICA TOR Rear View .
Using On Screen Display (OSD) Functions Display main menu. 1 Exit from OSD menu. Auto adjust the image when not in main menu. 2 Confirm the selection. Select the desired item when in OSD menu. V or W When not in OSD menu, it is to immediately activate Contrast/ Brightness.
Short Cut s Function from the button(s) Auto Adjust : T o a uto adjust Horizontal Position, V ertical Position, Phase (Fine T une) and Clock (H. Size) of the screen. Contrast : T o adjust the foreground white level of screen image. V : increase contrast, W : decrease contrast.
Sharpness : T o adjust the clarity of a non-SXGA (1280x1024) signal with W or V button. Setup Menu : T o set up Language Sel ect, Resolution Notice, OSD Position, OSD T ime Out. Language Select : T o allow users to choose from available languages. Resolution Notice : Resolution Notice is to remind you set the best quality for the image.
Supporting Timing Modes VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC.
Technical Information T echnical Specification 8 LCD Panel 19.0” TFT Pow er Management Energy S tar compliant VESA DPMS compatible < 2 W Displayable Resolution SXGA 1280 x 1024 max. V ertical Frequency 75Hz max. Pixel Dimension 0.294 x 0.294 mm LCD Display Color 16.
Care and Maintenance Care A void exposing your monitor directly to s unlight or other heat source. Place your monitor away from the sun to reduce glare. Put your monitor in a well ventilated area. Do not place any heavy things on top of your monitor .
Wrong or abnormal colors If any colors (red, green, blue) are missing, check the video cable to make sure it is securely connected. Loose or br oken pins in the cable connector could cause an improper connection. Connect the monitor to another computer .
An important point after buying a device Hanns.G JC-199APB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hanns.G JC-199APB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hanns.G JC-199APB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hanns.G JC-199APB you will learn all the available features of the product, as well as information on its operation. The information that you get Hanns.G JC-199APB will certainly help you make a decision on the purchase.
If you already are a holder of Hanns.G JC-199APB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hanns.G JC-199APB.
However, one of the most important roles played by the user manual is to help in solving problems with Hanns.G JC-199APB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hanns.G JC-199APB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
