Instruction/ maintenance manual of the product HL227DBB Hanns.G
Go to page of 23
HL227 HSG 11 7 6 OSD[V4.395].
User ’ s Manual OSD[4.395] 2 Before operating the monitor, please read this ma nual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interfer ence S tatement This equipment has been tested and found to comp ly with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
User ’ s Manual 3 RECYCLING INFORMATION We, the Hanns.G care very much about our environment prot ection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life.
User ’ s Manual 4 T ABLE OF CONTENTS SAFETY NOTICE .................................................................................................. 5 PRECAUTIONS .....................................................................................
User ’ s Manual 5 SAFETY NOTICE 1. The changes or modifications not expressly approved by the pa rty responsible for compliance could void the user's authority to operate the equipm ent. 2. Shielded interface cables and AC pow er cord, if any , must be used in order to comply with the emission limits.
User ’ s Manual 6 SPECIAL NOTES ON LCD MONITORS The following symptoms are norm al with LCD monitor and do not indicate a problem. Due to the nature of the fluorescent light, the sc reen may flicker during initia l use. T urn off the Power Switch and then turn it on again to make sure the flicker disappears.
User ’ s Manual 7 BEFORE YOU OPERA TE THE MONIT OR FEA TURES 54,6cm / 21.5” W ide Screen TFT Col or LCD Monitor Crisp, Clear Display for W indows EP A ENERGY ST AR ® GP Green Prod.
User ’ s Manual 8 INST ALLA TION INSTRUCTIONS INST ALL REMOVE Figure.1. Installing and Removing the Base INSTALLATION: 1. Align the monitor with the opening in the base. 2. Note that the longer section of the base points forward. 3. Snap the monitor into its base.
User ’ s Manual 9 SETTING THE MONIT OR ON THE W ALL DISSEMBLING THE ST AND BASE: 1. Disconnect all the cables and cords from the Monitor to prevent breakage. 2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the Monitor .
User ’ s Manual 10 MAKING CONNECTIONS CONNECTING TO A PC T urn off your computer before perform ing the procedure below . 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer ’ s VGA port.
User ’ s Manual 11 ADJUSTING THE VIEWING ANGLE For optim al viewing it is recommended to look at the full face of the monitor , then adjust the monitor ’ s angle to your own preference. Hold the stand so you do not topple the m on itor when you change the monitor ’ s angle.
User ’ s Manual 12 OPERA TING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or of f. The other control butt ons are located on the front panel of the monitor (See Figu re 4). By changing these settings, the picture ca n be adjusted to your personal preferences.
User ’ s Manual 13 FRONT P ANEL CONTROL Power Button: Press this button to switch ON/OFF of m onitor ’ s power . Power Indicator: Green — Power On mode. Orange — Power Saving mode. MENU / RETURN: 1. T urn the OSD menu on/off or re turn to the previous menu.
User ’ s Manual 14 Resolution 640x400@70Hz ↔ 720x400@70Hz 640x480@60Hz ↔ 720x480@60Hz 1280x768@60Hz ↔ 1360x768@60Hz 1400x1050@60Hz ↔ 1680x1050@60Hz ** The scree n resolutions available will depend on the purchased m odel.
User ’ s Manual 15 HOW T O ADJUST A SETTINGS BRIGHTNESS/ CONTRAST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display according to your preference.
User ’ s Manual 16 display , which does not ensure the image is shown as is or in initial scale. 「 FIT 」 indicates scaling by the proportion of original images, which may cause the screen showing black bands.
User ’ s Manual 17 the OSD. Enter the option and adjust the level. OSD TIME-OUT Select 「 OSD TIME-OUT 」 option to set the OSD time out from 10 to 100 seconds.
User ’ s Manual 18 PLUG AND PLA Y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capa bilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, depe nding on the level of DDC used, communicate additional information about its display capabilities.
User ’ s Manual 19 TECHNICAL SUPPOR T (F AQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible.
User ’ s Manual 20 Addendum related to Windows 7 When you encounter display problem under Windows 7, you need to do the following: 1. Make sure your PC computer (Hardw are requirement) can support Windows 7. 2. Make sure your video ca rd can run Windows 7.
User ’ s Manual 21 ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connect ed, If the connector is loose, tighten the connector ’ s screws. 2. Check the signal-cable’ s connection pins for damage.
User ’ s Manual 22 29 1680×1050 @60Hz 65.290 59.954 30 1920×1080 @60Hz 67.500 60.000 (V ideo mode) MODE RESOLUTION 1 640×480p @60Hz 2 720×480p @60Hz 3 720×576p @50Hz 4 1280×720p @60Hz 5 1920×.
User ’ s Manual 23 APPENDIX SPECIF ICA TIONS LCD Panel Driving system TFT Color LCD Size 54,6cm / 21.5” Diagonal Pixel pitch 0,248mm(H) x 0,248mm(V) V ideo H-Frequency 24KHz – 83KHz V -Frequency 56 – 75Hz Display Colors 16.
An important point after buying a device Hanns.G HL227DBB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hanns.G HL227DBB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hanns.G HL227DBB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hanns.G HL227DBB you will learn all the available features of the product, as well as information on its operation. The information that you get Hanns.G HL227DBB will certainly help you make a decision on the purchase.
If you already are a holder of Hanns.G HL227DBB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hanns.G HL227DBB.
However, one of the most important roles played by the user manual is to help in solving problems with Hanns.G HL227DBB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hanns.G HL227DBB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
