Instruction/ maintenance manual of the product OHDPR8 Hammer Strength
Go to page of 16
OL YMPIC HEA VY DUTY POWER RACK 8 ’ (OHDPR8) Part # 7615401 Rev . C Revision:12/09/03 1 ASSEMBL Y INSTRUCTIONS.
P AR TS LIST PA R T # LEA 7586101 LEA 7586501 LEA 7584601 LEA 7584901 LEA 7585801 LEA 7586601 LEA 7586901 LEA 7588301 LEA 7584401 LEA 7584501 LEA 7587501 LEA 7587901 LEA 7587801 LEA 7589201 KEY 1 2 3 .
3 17 1/2 X 1-1/2” BOL T 16 1/2 X 4-1/2” BOL T 21 3/8” INT TOOTH LOCK W ASHER 20 1/2” INT TOOTH LOCK W ASHER 26 1/2 X 4-1/4” BOL T 18 3/8 X 3-3/4” FLA T HEAD BOL T 24 3/8” LOCK NUT 23 1/2.
STEP 1: FIGURE 1 4 • LOOSEL Y assemble the REAR UPRIGHT (4) to the LEFT UPRIGHT BASE (1) using two 1/2 X 4-1/4” BOL TS (26), two 1/2” PLASITC DOME W ASHERS (22), two 1/2” INT TOOTH LOCK W ASHERS (20) and two 1/2” LOCK NUTS (23) as shown in FIGURE 1.
5 STEP 2: FIGURE 2 • LOOSEL Y assemble the BOTT OM UPRIGHT SUPPOR T (15) to the REAR UPRIGHTS (4) using four 1/2 X 4-1/4” BOL TS (26), four 1/2” PLASITC DOME W ASHERS (22), four 1/2” INT T OOTH LOCK W ASHERS (20) and four1/2” LOCK NUTS (23) as shown in FIGURE 2.
6 STEP 3: FIGURE 3 • LOOSEL Y assemble the FRONT UPRIGHT (3) to the LEFT UPRIGHT BASE (1) using two 1/2 X 4-1/4” BOL TS (26), two 1/2” PLASITC DOME W ASHERS (22), two 1/2” INT TOOTH LOCK W ASHERS (20) and two 1/2” LOCK NUTS (23) as shown in FIGURE 3.
7 STEP 4: FIGURE 4 7 • LOOSEL Y assemble the REAR UPPER SUPPOR T (7) and the CROSS SUPPOR TS (5) to the REAR UPRIGHTS (4) using four 1/2 X 4- 1/2” BOL TS (16), eight 1/2” INT T OOTH LOCK W ASHERS (20) and four 1/2” LOCK NUTS (23) as shown in FIGURE 4.
8 STEP 5: FIGURE 5 • LOOSEL Y assemble the CHIN-UP SUPPOR T (8) to the CROSS SUPPOR TS (5) and the FRONT UPRIGHTS (3) using two 1/2 X 4-1/2” BOL TS (16), two 1/2 X 4-1/4” BOL TS (26), six 1/2” INT TOOTH LOCK W ASHERS (20), two 1/2” PLASTIC DOME W ASHERS (22) and four 1/2” LOCK NUTS (23) as shown in FIGURE 5.
9 STEP 6: FIGURE 6 • LOOSEL Y assemble the WEIGHT HORN UPRIGHTS (6) to the LEFT & RIGHT UPRIGHT BASE (1 & 2) using four 1/2 X 4-1/4” BOL TS (26), four 1/2” PLASTIC DOME W ASHERS (22), four 1/2” INT T OOTH LOCK W ASHERS (20) and four 1/2” LOCK NUTS (23) as shown in FIGURE 6.
10 STEP 7: FIGURE 7 • Securely tighten all loose frame connections made to this point. TIGHTEN! TIGHTEN! TIGHTEN! TIGHTEN!.
11 STEP 8: FIGURE 8 • LOOSEL Y assemble one RIGHT & one LEFT ADJUSTMENT RACK (9 & 10) to the REAR UPRIGHTS (4) as shown, using eight 3/8 X 3-3/4” FLA T HEAD BOL TS (18), eight 3/8” INT T OOTH LOCK W ASHERS (21) and eight 3/8” LOCK NUTS (24).
12 STEP 9: FIGURE 9 • SECUREL Y assemble the ten WEIGHT HORNS (1 1) to the WEIGHT HORN UPRIGHTS (6) using twenty 1/2 X 4-1/4” BOL TS (26), twenty 1/2” INT TOOTH LOCK W ASHERS (20), twenty 1/2” PLASTIC DOME W ASHERS (22) and twenty 1/2” LOCK NUTS (23) as shown in FIGURE 9.
13 STEP 10: FIGURE 10 • Assemble two SWIVEL SPOTTERS (25) to the BOTTOM UPRIGHT SUPPOR T (15) as shown using four 1/2 X 1-1/2” BOL TS (17), four 1/2” FLA T W ASHERS (19), four 1/2” INT TOOTH LOCK W ASHERS (20) and four 1/2” LOCK NUTS (23). See FIGURE 10.
14 STEP 1 1: FIGURE 1 1 • Insert the LEFT BAR SUPPOR T (12) into the desired slots of the LEFT ADJUSTMENT RACK (10), and allow it to drop down to lock in place. See FIGURE 11. 10 13 12 • Repeat the above step to assemble the RIGHT BAR SUPPOR T (13) to the RIGHT ADJUSTMENT RACK (9).
15 STEP 12: FIGURE 12 • Insert the BAR CA TCHES (14) into the desired slots on the LEFT & RIGHT ADJUSTMENT RACKS (10 & 9), and allow it to drop down and lock into place. See FIGURE 12. 14 9 10 14 Thank you for pur chasing the OL YMPIC HEA VY DUTY POWER RACK.
Clean: • Upholstery with mild soap and water . • Guide rods with a cotton cloth. • Hand grips with mild soap and water . • Frame damage can be repaired with touch-up paint can be purchased from your Hammer Strength customer service representative.
An important point after buying a device Hammer Strength OHDPR8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hammer Strength OHDPR8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hammer Strength OHDPR8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hammer Strength OHDPR8 you will learn all the available features of the product, as well as information on its operation. The information that you get Hammer Strength OHDPR8 will certainly help you make a decision on the purchase.
If you already are a holder of Hammer Strength OHDPR8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hammer Strength OHDPR8.
However, one of the most important roles played by the user manual is to help in solving problems with Hammer Strength OHDPR8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hammer Strength OHDPR8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
