Instruction/ maintenance manual of the product FE155 Frymaster
Go to page of 22
Frymaster, a member of the Co mmercial Food Eq uipment Service Asso ciation, recomm ends using CFESA Certified Tec hnicians. 24-Hour Service Hotline 1-800-551-8633 SEPT 2008 PRINTED IN THE USA www.
ii Please read all sections of this manual and retain for future reference. NOTICE This appliance is intended for professional use only and is to be operated by qualified personnel only. A Frymaster Factory Authorized Service Center (FASC) or other qualified professional should perform installation, maintenance, and repairs.
iii WARNING Do not bang fry baskets or other utensils on the fryer’s joiner strip. The strip is present to seal the joint between the frypot. Banging fry baskets on the strip to dislodge shortening will distort the strip, adversely affecting its fit.
iv NOTICE All units shipped without factory supp lied cords and plug assemblies must be hardwired using flexible condui t to the terminal block located on the rear of the unit. These units should be w ired to NEC specifi cations. Hardwired units must include installation of restraint devices.
v FE155 Rethermalizer TABLE OF CONTENTS P A G E CHAPTER 1: General Information Parts Ordering and Service Information ........................................................................................ .1 - 1 Safety Information ..................
1-1 CHAPTER 1: Introduction 1.1 Parts Ordering and Service Information In order to assist you as quickly as possible, th e Frymaster Authorized Service Agency (ASA) or Service Department representative requires certain in form ation about your equipment.
1-2 DANGER boxes contain information about actions or conditions that may cause or result in injury to personnel , and which may cause damage to your system and/or cause your sy stem to malfunction.
1-3 QUALIFIED SERVICE PERSONNEL Qualified service personnel are those that are familiar with Frymaster equipm ent and who have been authorized by Frymaster to perform service on Frym aster equi pment.
2-1 CHAPTER 2: Installation Instructions 2.1 General Installation Requirements PROPER INSTALLATION IS ESSENTIAL FOR EFFICIENT, TROUBLE-FREE OPERATION OF YOUR RETHERMALIZER. ANY UNAUTHORIZ ED ALTERATIONS MADE TO THIS EQUIPMEN T WILL VOID THE FRYMASTER WARRANTY.
2-2 The user may find the booklet “How to Identify a nd Resolve Radio-TV Interference Problems” help- ful. It is prepared by the Federal Communicati ons Commission and is available from the U.S. Gov- ernment Printing Office, Washington, DC 20402, Stock No.
2-3 tension pointed to the left side of the cabinet. If necessary, raise the unit and rotate drain toward the right side. The end of the drain should be extended away from the unit cabinet to ensure steam doesn’t rise into the cabinet interior. For units equipped with casters, there are no bu ilt-in leveling devices.
2-4 must be oil and water resistant. Make the conn ections in accordance with the wiring diagram be- low. 3. Install the supplied strain relief, Oflex SKZ 21 (8071210), which has a wire range of 15 to 23 mm, and replace the lower back panel and contactor box cover.
2-5 Field Connection Wiring Diagrams.
3-1 CHAPTER 3: Operating Instructions 3.1 Finding Your Way Around the FE155 3.1 Introduction FE155 FE155 Vat Low Level Float Switch Upper Level Float Switch Controller Lid Element Drain Inlet Overflow Bezel Cabinet Interior Main Power Switch Drain handle Drain extension NOTE: The water inlet is controlled by the main power switch.
3-2 3.2 Controller This equipment uses a specialized controller. Computer Operation • Ensure the main power switch (behind cabinet door) is on. • Press either ON/OFF button to turn the computer on. • The computer displays LO as it rises to the preset 190°F setpoint for simm er.
3-3 • Press Boil key a second time to return to simm er mode. Programming • Remove the bezel (see annotated photo on page 3-1) Lift up and then rotate out at the bottom, which exposes a keypad beside each timer button. • Temperature change: Press the temperature key until the current temperature is displayed.
3-4 When the water level is above the lower float sw itch, the elements will energize. When the unit reaches setpoint, the display will alternate between dashed lines and S inn . Pressing either temperature key displays the actual temperature on the left, setpoint on the right.
4-1 CHAPTER 4: Preventive Maintenance 4.1 Daily Checks and Services Inspect Cooking System and Accessories for Damage Look for loose or frayed wires and cords, leaks, foreign material in cookpot or inside cabinet, and any other indications that the rethermalizer and accessories are not ready and safe for operation.
4-2 5.3 Periodic/Annual Checks Frymaster recomm ends that the unit be inspected annually by a Factory Authorized Service Techni- cian for the following checks and adjustments: • Verify that the heating element wires are in good condition and that leads have no visible fraying or insulation damage.
5-1 CHAPTER 5: TroubleshootingInspection 5.1 Introduction This chapter provides an easy reference guide to the more com mon problems that m ay occur during the operation of this equipment. The troubleshooti ng guides in this chapter are intended to help you correct, or at least accurately diagnose, problems with the equipm ent.
5-2 5.2 Operator Troubleshooting Guide PROBLEM POSSIBLE CAUSES CORRECTIVE ACTION A. No power to unit. A. Turn on circuit breaker. B. Computer not turned on. B. Press computer ON/OFF key. Computer does not activate. C. Main power switch off. C. Turn main power switch on.
Frymaster, L.L.C., 8700 Line Av enue, Shrev eport, Louisiana 71106 TEL 1-318-865-1711 FAX (Parts) 1-31 8-688 -2200 FAX (Tech Support) 1-318-219-7135 PRINTED IN THE UNITED STATES SERVICE HOTLINE 1-800-.
An important point after buying a device Frymaster FE155 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Frymaster FE155 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Frymaster FE155 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Frymaster FE155 you will learn all the available features of the product, as well as information on its operation. The information that you get Frymaster FE155 will certainly help you make a decision on the purchase.
If you already are a holder of Frymaster FE155, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Frymaster FE155.
However, one of the most important roles played by the user manual is to help in solving problems with Frymaster FE155. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Frymaster FE155 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
