Instruction/ maintenance manual of the product Cool Zone Electric Fryer Frymaster
Go to page of 20
INSTALLATION, OPERATION, & MAINTENANCE MANUAL COOL ZONE ELECTRIC FRYERS (CE) DEAN INDUSTRIES 14501 South Broadway, Gardena, California 90248 Dean Factory Service Center 1-800-551-8633 1-318-865-17.
Please read all sections of this manual and retain for future reference. NOTICE IF, DURING THE WARRANTY PERIOD, THE CUST OMER USES A PART FOR THIS ENODIS EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECY.
DANGER Improper installation, adjustment, maintenance or service, and unauthorized alterations or modifications can cause property damage, injury, or death. Read the installation, operating and service instructions thoroughly before installing or servicing this equipment.
DEAN COOL ZONE ELECTRIC FRYERS (CE) INSTALLATION, OPERATION, & MAINTENANCE MANUAL TABLE OF CONTENTS PAGE 1 PARTS ORDERING/SERVICE INFORMATION 2 2 IMPORTANT INFORMATION 3 3 INSTALLATION 5 4 DAILY OPERATION 10 5 CLEANING AND MAINTENANCE 12 6 OPERATOR TROUBLESHOOTING 14 7 WIRING DIAGRAM 15 1.
3 2. IMPORTANT INFORMATION 2.1 DESCRIPTION: The Dean Cool Zone (CE) electric fryers are energy-efficient, electrically heated units, certified by NSF and the Underwriters Laboratory and manufactured to their basic performance and application specifications.
4 c. STANDARDS : All electrical cooking appliances must be electrically connected and grounded in accordance with local codes, or in the absence of local codes, with the latest editions of the European Community (CE) standards. 2.4 AIR SUPPLY & VENTILATION: a.
5 3. INSTALLATION 3.1 POSITIONING: a. Initial Installation : If installed with legs, do not push against any unit edges to adjust its position. Use a pallet or lift jack to lift it slightly and place it where it is to be installed. b. Relocating The Fryer : If relocating a fryer installed with legs, remove all weight from each leg before moving.
6 Leg and Caster Installations Figure 3-1 d. Installing Optional Swivel Casters : 1. Swivel casters can only be used with multiple fryer batteries (two or more fryers battered together). 2. Install non-locking cast ers only at the rear of the unit as shown in the Figure 3-1.
7 4. When leveling the unit, the leg body should be held firmly to keep the leg from rotating while turning the hex bullet foot to the required height. c. Rigid Casters (Only ) : 1. Install the optiona l rigid casters on the fryer rear channel only. Legs must be installed on the front channel.
8 restraint on the appliance and, if disconnection of the restraint is necessary, to reconnect this restraint after the appliance has been returned to its originally installed position. 3.4 ELECTRICAL CONNECTIONS: Plan and carry out installation in accordance with local codes.
9 3.6 FINAL PREPARATION: a. When using liquid shortening (cooking oil), fill the fryer to the “oil level” line scribed into the back of the fryer vessel. b. When using solid shortening, either melt it first, or cut in to small piece s and pack into cool zone (bottom) of the frying vessel.
10 4. DAILY OPERATION 4.1 OPENING: At opening time, always visually check that the power switch and the thermostat are “OFF”. 4.2 GENERAL USE: a. For consistent quality product, convenience and long-term savings, use a high-quality liquid frying compound.
11 CAUTION When filtering, neve r leave the filter unattended. Always point the flexible oil return hose nozzle down into the fry vessel to prevent spraying of hot oil which may cause severe burns. 4.5 CLOSING: When closing at night, filter oil in all fryers and drain the filter lines.
12 5. CLEANING & MAINTENANCE 5.1 GENERAL: Any piece of equi pment works better and lasts longer when maintained properly and kept clean. Cooking equipment is no exception. The fryer must be kept clean during the working day and thoroughly cleaned at the end of each day.
13 5.5 PERIODIC: The fryer should be checked and adjusted periodically by qualified service perso nnel as part of a regular kitchen maintenance program. 5.6 STAINLESS STEEL: All stainless steel fryer body parts should be wiped regularly with hot, soapy water during the day and with a liquid cleaner designed for this material at the end of each day.
14 6. TROUBLESHOOTING GUIDE The problems and possible solutions given belo w cover those most commonly encountered by operators. FOR DETAILED TROUBLESHOOTING AND SE RVICE-RELATED INFO RMATION, CALL THE DEAN SERVICE HOTLINE AT 1-800- 551-8633 (USA/Canada on ly) or 1-318-865-1711.
15 7. WIRING DIAGRAM 230/400V = 17. 118 KW Total 25.0 Am ps P/ N 14-0592-6 K2 = Heat Cont act or P/N 810-1202 K1 = Latc h Contac tor P/N 810-1202 Fuse 5 Amp P/N 1693 BLK #2 WHT# 2 PURP RED Oper Thermo.
16 8. COOL ZONE 1414E E LECTRIC (CE) PARTS LIST ITEM PART NUMBER DESCRIPTION 1 2698 LEG, BLACK, ADJUSTABLE WITH MOUNTING PLATE, 6" 1942 CASTER, 5" W/BRAKE 2 1943 CASTER, 5" W/O BRAKE 3 44-1363 NIPPLE, DRAIN EXT.
17 ITEM PART NUMBER DESCRIPTION 9 24-0350 LOWER HINGE BRACKET 10 36-0012 FRT & REAR CHANNEL 11 8101202 40 AMP 3 POLE CONTACTOR (CE Only) 12 12-0311 CNTRL PANEL BACK SR38 50-0041-1 SIDE PANEL PP/GR.
Frymaster, L.L.C., 8700 Line Av enue, PO Box 51 000, Shreveport, Louisiana 71135-1000 Shipping Address: 8700 Line Av enue, Shreveport, Louisiana 71106 TEL 1-318-865-1711 FAX (Parts) 1-31 8-219 -7140 (Tech Support) 1-318-2 19 -7135 Price: $6.
An important point after buying a device Frymaster Cool Zone Electric Fryer (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Frymaster Cool Zone Electric Fryer yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Frymaster Cool Zone Electric Fryer - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Frymaster Cool Zone Electric Fryer you will learn all the available features of the product, as well as information on its operation. The information that you get Frymaster Cool Zone Electric Fryer will certainly help you make a decision on the purchase.
If you already are a holder of Frymaster Cool Zone Electric Fryer, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Frymaster Cool Zone Electric Fryer.
However, one of the most important roles played by the user manual is to help in solving problems with Frymaster Cool Zone Electric Fryer. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Frymaster Cool Zone Electric Fryer along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
