Instruction/ maintenance manual of the product DR-6080 Canon
Go to page of 16
SC ANNING B ASICS USEFUL FEA TURES TROUBLESHOO TING QUICK REFERENCE DOCUMENT SCANNER.
PRECAUTIONS 1 ● Make sure that your documents are within the acceptable scanning sizes. Width: 2.2 – 12 inches (55 – 305 mm) Length: 2.8 – 17 inches (70 – 432 mm) Documents up to 39.4 inches (1000 mm) can be scanned in the extra long mode. Thickness: 0.
SCANNING BASICS GETTING ST ARTED This section explains the basic steps involved in scanning a document. It assumes that the batch to be scanned contains papers all of the same size and thickness.
3 SCANNING BASICS STEP 2 ▲ 1 ■ Long Documents If the document you are scanning is long, open the document eject tray extension . Next, lift up the stopper and adjust its position to match the length of the document. ■ Short Documents If the document you are scanning is short, use the stopper without opening the document eject tray extension.
STEP 3 The DR-6080 and the DR-9080C are operated via the bundled ISIS/TWAIN driver, which is compatible with a wide range of application software. Use the ISIS/TWAIN driver to select the feeding option that matches your need. 4 ▲ In addition to selecting the feeding option, use the ISIS/TWAIN driver to make any other scan settings you require.
5 STEP 4 Prepare your documents by aligning the batch so that its edges are even. Then place the batch on the document tray with the documents face up. The top edge of the batch should be placed against the back of the document tray. ▲ STEP 5 Adjust the document guides to the width of the documents.
6 SCANNING BASICS 1 STEP 4 Place the first page of the batch face up in the document tray. Adjust the document guides to the width of the page. ▲ STEP 5 Use your application software to instruct scanning to start. To scan more documents, simply reload the document tray.
7 1 STEP 4 Place one page face up on the document tray. Adjust the document guides to the width of the page. STEP 5 Select Manual Feeding in Feeding Option on the ISIS/TWAIN driver’s settings screen. Alternatively, press the Bypass Mode key on the operation panel.
COUNT ONL Y MODE In this mode, documents are fed through the scanner and counted, not scanned. To use this mode, press the Count Only key on the operation panel. Then place a batch on the document tray and press the Start key. The number of pages in the batch will appear in the counter display.
9 USER PREFERENCES To promote ease of use, the bundled ISIS/TWAIN driver offers registration of up to 100 sets of customized scan settings. After registration, you can prepare the scanner for a job by simply selecting a desire setting from a pull-down menu.
10 2 SKIP BLANK P A GE Useful for scanning batches that include single- and double-sided documents, this feature automatically removes blank pages from the image file. ▲ AU T OMA TIC P A GE SIZE DETECTION This function automatically detects the size/thickness of documents and adjusts the scanner.
11 3 STEP 1 Remove documents from the scanner’s upper and lower trays, and remove any extra parts attached to the upper tray. Close the document eject tray extension if it is open. Paper may have jammed if scanning stops midway or “PXX” appears on the counter display.
12 3 STEP 1 Remove documents from the scanner’s upper and lower trays, and remove any extra parts attached to the upper tray. Close the document eject tray extension if it is open. If a document is jammed in the scanner’s paper exit section, the upper scanner only needs to be lifted up slightly for you to remove the document.
13 3 ERROR CODES TROUBLESHOOTING Error codes appear on the operation panel’s counter display when a scanner malfunction occurs. Error Code Cause and Solution The document does not feed correctly. Press the Stop key to reset the counter. Place the document back on the document tray and scan the document again.
14 3 A complete list of error codes and solutions to other types of scanner trouble can be found in Chapter 6 of the Instructions manual (“Troubleshooting”). TROUBLESHOOTING Error Code Cause and Solution Double feed detected by document length and ultrasonic.
CANON Customer Service Centers © CANON ELECTRONICS INC. 2003 PRINTED IN JAPAN PUB.CE-CE-305 0104AB0.2 *CE-CE-305*.
An important point after buying a device Canon DR-6080 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon DR-6080 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon DR-6080 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon DR-6080 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon DR-6080 will certainly help you make a decision on the purchase.
If you already are a holder of Canon DR-6080, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon DR-6080.
However, one of the most important roles played by the user manual is to help in solving problems with Canon DR-6080. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon DR-6080 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
