Instruction/ maintenance manual of the product BCE5232IA BTC
Go to page of 21
Dual Digital Drive CD-RW 5232IA User’s Manual.
DANGER INVISIBLE LASER RADIATION WHEN O PEN AVOID DIRECT EXPOSURE TO BEAM VORSICHT INSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET NICHT DEM STRAHL AUSSETSEN ATTENTION RADIATIO N DU FAISCEAU LASER INVISIBLE EN CAS D’OUVERTURE. EVITER TOUTE EXPOSITION AUX RAYO NS.
FCC Compliance Statement This device complies with Part 15 of the FCC Ru les. Operation is subject to the following two condit ions: 1. this device ma y not cause harmful i nterference, and 2. this device must accept any interferen ce received, including interference that may cause undesired operat ion.
Table of Contents INTRODUCTION 1 S YSTEM R EQUIREMENTS 2 P ACKAGE C ONTENTS 2 INSTALLATION 3 H OST I NTERFACE C ONNECTIONS 3 H ARDWARE I NSTALLATION 4 D RIVER I NSTALLATION 6 For the CD-RW Drive 6 For.
Dual Digital Drive 1 INTRODUCTION Thank you for the purchase of CD-RW 5232IA, a perfect and compact dual storage drive with the combination of an IDE CD-ReWritable drive and a USB-connected card reader. CD-RW 5232IA backs up all writing modes and different CD formats.
Dual Digital Drive 2 System Requirements For IBM compatible PCs, the syst em requirements recommended are as follows: ♦ Pentium II 350MHz above with at least 64MB of memory ♦ Fast and sufficient hard disk space (minimum 200MB for installation, 1GB or more is recommended.
Dual Digital Drive 3 INSTALLATION Host Interface Connections Most current mainboards have two IDE ports (primary and secondary) which can connect two IDE cables. Tw o IDE cables allow you to connect up to four devices, but it is reco mmended that you separate IDE ports for your hard drive and your CD-ReWritable dr ive.
Dual Digital Drive 4 Hardware Installation 1. Turn off the power to the computer system. 2. Disconnect the power cord and all cables from the back of your computer, and then remove the cover of the computer. 3. Insert the drive into one of the vacant 5.
Dual Digital Drive 5 6. Connect the USB cable at the back of the drive to the USB connector on the mainboard. The red wire of the cable needs to plug into Pin 1 on the board. This drive supports USB 1.1 and if you connect to USB 2.0 connector, only tran sfer rate of USB 1.
Dual Digital Drive 6 Driver Installation For the CD-RW Drive For the CD-RW drive itself of CD-RW 5232IA, it is an IDE device supporting Plug & Play, and Windows 98SE/ME/2000/XP can automatically detect the drive and load the appropriate driver.
Dual Digital Drive 7 Click “OK” if you have already had USB cabl e connected (Refer to Hardware Installation, St ep 6.).
Dual Digital Drive 8 Make sure to restart your computer. Windows ME/XP Since Windows ME and XP already have USB Mass Storage support, the card reader can be detected and wo rk fine without installing driver. However, we recommend that you in stall the provided driver to have more explicit operation status of the card reader, as described below.
Dual Digital Drive 9 After the driver installation, 4 extra ic ons with different card type indicated will show in Device Manager/My computer. And then you can use each slot of the card reader for file archiving/recording.
Dual Digital Drive 10 CONNECTION & OPERATION Front Panel 1 2 7 83 4 9 10 11 6 5 1. Headphone Jack By plugging in the headphone jack here, you can listen to an audio CD (CD-DA disc) directly playing from the drive. 2. Headphone Volume Control This knob adjusts the audio output level.
Dual Digital Drive 11 Flashes “ red ” while writing a CD-R/CD-RW disc. 6. LED Indicator (card reader) Once the USB cable is correctly connected, this LED will light yellow , which means the card slots are ready to use. 7. Slot for Memory Stick (MS)/Memory Stick Pro (MS Pro) 8.
Dual Digital Drive 12 Rear View 6 34 5 1. Digital Audio Output Connector If your sound card has a digital audio IEC958 format connector, you can connect it to this digital audio output connector with a 2-pin audio cable. 2. Analog Audio Output Connector This connector allows you to connec t the drive to your sound card with a 4-pin audio cable.
Dual Digital Drive 13 5. Pow er Supply Connector By plugging the computer’s power supply cable here, you can connect the drive and your computer system. 6. USB Cable Connect the USB cable to the U SB connector on the mainboard. The red wire of the cable needs to plug into Pin 1 on the board.
Dual Digital Drive 14 TECHNICAL DATA Interface CD-RW Drive: IDE Card Reader: USB 1.1 Form factor 5.25" Half Height Writing speed CD-R: 8X/16X/24X/32X /40X/48X/52X CD-RW: 4X/10X/12X/16X /20X/24X/3.
Dual Digital Drive 15 Access time 90ms at ⅓ stroke(52X CD-ROM) 180ms at full stroke(52X CD-ROM) 99ms at ⅓ stroke (32X CD-RW) 200ms at full stroke (32X CD-RW) Disc loading Tray (motorised), Dust Sealed Audio output level Line out = 0.6 ± 10%Vrms Headphone out = 0.
Dual Digital Drive 16 Environment CD-RW Drive Temperature Operating 5°C to 45°C Non-operating -20°C to 60°C Humidity Operating 8% ~ 80%RH Non-operating 5% ~ 95%RH Card Reader Temperature Operating.
3100551760 Version 1.0 June 2003.
An important point after buying a device BTC BCE5232IA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought BTC BCE5232IA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data BTC BCE5232IA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, BTC BCE5232IA you will learn all the available features of the product, as well as information on its operation. The information that you get BTC BCE5232IA will certainly help you make a decision on the purchase.
If you already are a holder of BTC BCE5232IA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime BTC BCE5232IA.
However, one of the most important roles played by the user manual is to help in solving problems with BTC BCE5232IA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device BTC BCE5232IA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
