
INE-F904D / X903D / X803D / X703D / INE-W720D Series software update procedure

Install update software (USB 1)
The firmware must be updated with two USB devices. First, please download the “Firmware_standardAUDIO_USB-Stick1.zip“ and follow the instructions. The INE-F904D / X903D / X803D / X703D / INE-W720D can be updated via USB connection (see connection diagram below). Before starting the update, please check following notes. The download file is compressed in zip format. The contents of the download need to be extracted to a freshly formatted USB device (FAT32). The update takes 10 to 15 minutes.
1 Store the downloaded and extracted files “Firmware_standardAUDIO_USB-Stick1.zip” on the empty USB device in the Root Folder (see left figure).
2 Connect USB device to USB connector of the Alpine Head Unit. Please see lower left figure.

Update file contents / storage place (for all type of units)

3 Press “OK” button when update message appears on the screen. The process will now install the new software data to your Alpine Head Unit.


“Please wait” can take up to 20 seconds.
4 Press “OK” button again when next update message appears on the screen.


Update will be completed in around 10 minutes. “Update in progress” steps are: “1/3 2/3 3/3”
5 After the first step of the software update is complete, your Alpine Head Unit will restart automatically.

6 Remove the USB device from Alpine Head Unit. Now go to step 2, “Firmware_standardAUDIO_USB-Stick2.zip” Update, next page.
USB device USB extension cable ALPS ALPINE Europe GmbH, Alpine Brand
Connection · Alpine Head Unit · USB connector

INE-F904D / X903D / X803D / X703D / INE-W720D Series software update procedure
Install update software (USB 2)
Now, as second, please download the “INE-F904D_INE-W720D_X803D- U_X903D_Standard_Audio_USB-Stick2.zip“ and follow the instructions. The INE-F904D / X903D / X803D / X703D / INE-W720D can be updated via USB connection (see connection diagram below). Before starting the update, please check following notes. The download file is compressed in zip format. The contents of the download need to be extracted to a freshly formatted USB device (FAT32). The update takes 3 to 8 minutes.
7 Then the second step of the software update takes place. Store the downloaded and extracted files “INE-F904D_INE-W720D_X803D-U_X903D_Standard_Audio_USB- Stick2.zip” on the empty USB device in Root Folder (see left figure). 8 Connect USB device to USB connector of the Alpine Head Unit. Please see lower left figure.
9 Press “OK” button when update message appears on the screen. The process will now install the BU-com audio update to your Alpine Head Unit.
Update file contents / storage place (for all type of units)

“Please wait” can take up to 20 seconds.
10Press “OK” button again when next update message appears on the screen.

Update will be completed in around 4 minutes.
11 When the BU-com audio update is finished, the Alpine Head Unit will reboot automatically in “Language” select screen.


12Remove the USB device from Alpine Head Unit.
13Select your language and press “OK”.
14Reset the Alpine Head Unit by clicking: Setup General About Reset Attention: All personal audio settings will be deleted!
Alpine Head Unit Connection
15Check “Firmware Version” in Setup: General About Firmware Version If “Firmware Version” number displayed as: X903D-F, X903D-V447, X903D-G6/-G7/-OC3: “1.4010.1.4010.1.4010” INE-F904D, INE-F904T6, X803D-U, X803D-T6/-P6C/-A3/-TT, INE-W720D, INE-W720DM INE-W720-E46/-LEON/-ML/-S453B/-500X/-500MCA, X703D-F/-A4/-A5/-Q5:
“1.4000.1.4000.1.4000“ in SETUP menu of the Alpine Head Unit, this update procedure has been successful.
USB device USB extension cable
ALPS ALPINE Europe GmbH, Alpine Brand
USB connector
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.