EN
Alpine logo
Official user manual

Alpine Software Update

2 pages·144 KB·Software·PDF·ENDEFRITNLJA
Alpine Software Update
Table of Contents 2 sections Update procedure for software version 1.000 / 1.070 / 1.200 · Install update software (phase 3) Install map update (phase 2) ShowHide
Page 1 of the Alpine Software Update user manual — Update procedure for software version 1.000 / 1.070 / 1.200
Page 1 · click to enlarge
Page 1

INE-F904D / X903D / X803D / X703D / INE-W720 Series map 2020/06 and software update procedure

Alpine Software Update — Update procedure for software version 1.000 / 1.070 / 1.200 diagram (page 1)
Fig. 1 · Update procedure for software version 1.000 / 1.070…

Update procedure for software version 1.000 / 1.070 / 1.200

Install update software (phase 1) 1 Store the downloaded and extracted files „2020-06_standardMAP_Audio.zip” on the empty USB device in Root Folder (see left figure).

Check “Firmware Version” in Setup: →General →About →Firmware Version

If your Firmware Version is 1.3020, please follow the instruction “UG_INE-F904x_ X903x_X803x_X703x_INE-W720x_standardMAP_13020_Instruction_EN.pdf” version.

2 Connect USB device to USB connector of the Alpine Head Unit. Please see lower left figure.

The map 2020/06 and firmware can be updated with only one USB device and requires three update phases. First, please download the “2020-06_standardMAP_Audio.zip“ and follow the instructions. The INE-F904D / X903D / X803D / X703D / INE-W720 can be updated via USB connection (see connection diagram below). Before starting the update, please check following notes. The download file is compressed in zip format. The contents of the download need to be extracted to a freshly formatted USB device (FAT32). The update takes 35 to 45 minutes.

Alpine Software Update — Update procedure for software version 1.000 / 1.070 / 1.200 diagram (page 1)
Fig. 2 · Update procedure for software version 1.000 / 1.070…

Update file contents / storage place (for all type of units)

Alpine Software Update — Update procedure for software version 1.000 / 1.070 / 1.200 diagram (page 1)
Fig. 3 · Update procedure for software version 1.000 / 1.070…

3 Press “OK” button when update message appears on the screen.

Alpine Software Update — Update procedure for software version 1.000 / 1.070 / 1.200 diagram (page 1)
Fig. 4 · Update procedure for software version 1.000 / 1.070…
Alpine Software Update — Update procedure for software version 1.000 / 1.070 / 1.200 diagram (page 1)
Fig. 5 · Update procedure for software version 1.000 / 1.070…

“Please wait” can take up to 20 seconds.

4 Press “OK” button again when next update message appears on the screen.

  • Notes
  • Do NOT use the compressed file for update, otherwise the Unit cannot recognize the files.
  • Do NOT change folder name and file names, otherwise the Unit cannot recognize the files.
  • Do NOT store the folder inside another folder.
  • Do NOT store any other folders/files on the USB device.
  • Do NOT remove the USB device while updating.
  • Do NOT update while driving.
  • Do NOT press any buttons while updating.
  • Do NOT turn off vehicle’s ignition or head unit’s power switch while updating. Modern vehicles will shut down the ignition (ACC) after some time if the engine is not running. If you are not sure if this applies to your car, leave the engine idling while the update is in progress.
Alpine Software Update — Update procedure for software version 1.000 / 1.070 / 1.200 diagram (page 1)
Fig. 6 · Update procedure for software version 1.000 / 1.070…
Alpine Software Update — Update procedure for software version 1.000 / 1.070 / 1.200 diagram (page 1)
Fig. 7 · Update procedure for software version 1.000 / 1.070…

Update will be completed in around 4 minutes. “Update in progress” steps are: “1/3 →2/3 →3/3”

5 After the first phase of the software update is complete, your Alpine Head Unit will restart automatically. The USB device remains in the Alpine Head Unit.

Alpine Software Update — Update procedure for software version 1.000 / 1.070 / 1.200 diagram (page 1)
Fig. 8 · Update procedure for software version 1.000 / 1.070…

USB device USB extension cable

Alpine Electronics, Inc.

Connection · Alpine Head Unit · USB connector

Page 2 of the Alpine Software Update user manual — Install update software (phase 3) Install map update (phase 2)
Page 2 · click to enlarge
Page 2

INE-F904D / X903D / X803D / X703D / INE-W720 Series map 2020/06 and software update procedure

Install update software (phase 3) Install map update (phase 2)

6 Then the second phase of the software update takes place. Press “OK” button when update message appears on the screen. The process will now install the new map data and navigation application data to your Alpine Head Unit.

8 Then the third phase of the software update takes place. Press “OK” button when update message appears on the screen. The process will now install the BU-com audio update (last part) to your Alpine Head Unit.

“Please wait” can take up to 20 seconds.

9 Press “OK” button again when next update message appears on the screen.

Alpine Software Update — Install update software (phase 3) Install map update (phase 2) diagram (page 2)
Fig. 9 · Install update software (phase 3) Install map update…
Alpine Software Update — Install update software (phase 3) Install map update (phase 2) diagram (page 2)
Fig. 10 · Install update software (phase 3) Install map update…

Update will be completed in around 3 minutes. Update will be completed in around 30 minutes.

7 The new map data and navigation application is loaded successfully when your Alpine Head Unit restarts automatically. The USB device remains in the Head Unit.

10When the BU-com audio update is finished, the Alpine Head Unit will reboot automatically in “Language” select screen.

Alpine Software Update — Install update software (phase 3) Install map update (phase 2) diagram (page 2)
Fig. 11 · Install update software (phase 3) Install map update…

11 Remove the USB device from Alpine Head Unit.

→Go to no. 8.

12Select your language and press “OK”.

13Check “Firmware Version” in Setup: →General →About →Firmware Version If “Firmware Version” number displayed as: INE-F904D, INE-F904T6, X903D-F, X903D-V447, X903D-G6/-G7/-OC3, X803D-U/-T6/-P6C/-A3/-TT, X703D-F/-A4/-A5/-Q5, INE-W720D, INE-W720DM, INE-W720ML/-S453B/-500X/-E46/-LEON/-500MCA “1.3020.1.3020.1.3020” in SETUP menu of the Alpine Head Unit, this update procedure has been successful.

Alpine Software Update — Install update software (phase 3) Install map update (phase 2) diagram (page 2)
Fig. 12 · Install update software (phase 3) Install map update…

14Check “Map Version” in Navigation →Information →About →Content →Maps If “Map Version” has changed to: “… 2020.06”, this map update procedure has been successful.

Alpine Electronics, Inc.

Ask about the Alpine Software Update

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Alpine Software Update

Be the first to ask — other owners or our team will answer.

Original document

Alpine Software Update manual PDF

2 pages·144 KB·Software·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…