
INE-F904DC / X903DC / X803DC / INE-W720DC Series map 2020/06 and software update procedure

Install update software (phase 1) 1 Store the downloaded and extracted files „2020-06_camperMAP_Audio.zip” on the empty USB device in Root Folder (see left figure).
Check “Firmware Version” in Setup: →General →About →Firmware Version
If your Firmware Version is 1.3021, please follow the instruction “UG_INE-F904x_ X903x_X803x_X703x_INE-W720x_camperMAP_13021_Instruction_EN.pdf” version.
2 Connect USB device to USB connector of the Alpine Head Unit. Please see lower left figure.
The map 2020/06 and firmware can be updated with only one USB device and requires three update phases. First, please download the “2020-06_camperMAP_Audio.zip“ and follow the instructions. The INE-F904DC / X903DC / X803DC / INE-W720DC can be updated via USB connection (see connection diagram below). Before starting the update, please check following notes. The download file is compressed in zip format. The contents of the download need to be extracted to a freshly formatted USB device (FAT32). The update takes 35 to 45 minutes.

Update file contents / storage place (for all type of units)

3 Press “OK” button when update message appears on the screen.


“Please wait” can take up to 20 seconds.
4 Press “OK” button again when next update message appears on the screen.


Update will be completed in around 4 minutes. “Update in progress” steps are: “1/3 →2/3 →3/3”
5 After the first phase of the software update is complete, your Alpine Head Unit will restart automatically. The USB device remains in the Alpine Head Unit.

USB device USB extension cable
Alpine Electronics, Inc.
Connection · Alpine Head Unit · USB connector

INE-F904DC / X903DC / X803DC / INE-W720DC Series map 2020/06 and software update procedure
6 Then the second phase of the software update takes place. Press “OK” button when update message appears on the screen. The process will now install the new map data and navigation application data to your Alpine Head Unit.
8 Then the third phase of the software update takes place. Press “OK” button when update message appears on the screen. The process will now install the BU-com audio update (last part) to your Alpine Head Unit.
“Please wait” can take up to 20 seconds.
9 Press “OK” button again when next update message appears on the screen.


Update will be completed in around 3 minutes. Update will be completed in around 30 minutes.
7 The new map data and navigation application is loaded successfully when your Alpine Head Unit restarts automatically. The USB device remains in the Head Unit.
10When the BU-com audio update is finished, the Alpine Head Unit will reboot automatically in “Language” select screen.

11 Remove the USB device from Alpine Head Unit.
→Go to no. 8.
12Select your language and press “OK”.
13Check “Firmware Version” in Setup: →General →About →Firmware Version If “Firmware Version” number displayed as: INE-F904DC, INE-F904DU, INE-F904S907 / -F904TRA, X903DC-F, X903D-DU/-DU2, X903D-ID, X903D-S906, X803DC-U,INE-W720DC: “1.3021.1.3021.1.3021” in SETUP menu of the Alpine Head Unit, this update procedure has been successful.

14Check “Map Version” in Navigation →Information →About →Content →Maps If “Map Version” has changed to: “… 2020.06”, this map update procedure has been successful.
Alpine Electronics, Inc.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.