Instruction/ maintenance manual of the product 10 Xerox
Go to page of 19
Version 10.0 50-951A-10312.
2 of 19.
3 of 19 Scan to PC Desktop v10.0 Network Installation Guide Document version 4.0 This document provides instructions for installing the software associated with Scan to PC Desktop in a n etwork environment.
4 of 19 Scan to PC De sktop v10.0 Netw ork Inst allation Guide Table of contents Scan to PC Desktop v10.0 Network Installation Guide ............................................................. 4 Table of contents ....................................
5 of 19 Introduction This guide provides instructions for installing the softwa re associated with Scan to PC Desktop in a network environment. Targeted users are administrators, Information Technology specialists or programmers who set up or perform network installations.
6 of 19 Scan to PC Desktop software components Scan to PC Desktop is delivered in two variants: Special Edition and Professional Edition . These two editions of Scan to PC Desktop comprise different softwa re products from Nuance. All the installers of these software components support MSI (Windows Installer-based) distribution.
7 of 19 Windows 2000/2003 Server with Active Directory Support Active Directory is a feature of Windows 2000 Advanced Server and Windows 2003 Server. Group Policy, a component of Active Directory, includes a Software Installation snap-in that enables an administrator to create a networ k installation.
8 of 19 Systems Managem ent Server Support Systems Management Server (SMS) provides a m echanism for pushing appl ication installations out from the server to client sy st ems. SMS supports all versions of Windows 2000, XP and Vista when installing p roducts that use Windows Installer (MSI) tec hnology.
9 of 19 Creating administra tive images This section describes how to crea te administrative images of the software components of Scan to PC Desktop onto the network. Such an administrative installation will extract the necessar y files into a network location specified during the installation.
10 of 19 3. If applic able, select a language for the administrative installation (not necessary if setup language was specified in the command line). 4. During installation, specif y a target network location for the administrative image to be created.
11 of 19 Deployment - Active Directory This section describes how to install the software components of Scan to PC Desktop onto clients’ systems usin g Active Directory.
12 of 19 SharePoint and ODMA links also require Installscript v8 engine installer (ISSCRIPT8.msi) to be installed. You can find the Installscript v8 engine installer in the PPLINKS folder on the CD- ROM.
13 of 19 a. Under the console root Group Policy <name>, select Computer Configuration , Software Settings , right-click Software Installation , select New , and then Package . Note: InstallSh ield's Installscript engin e must be installed before installing an y component of Scan to PC Desktop .
14 of 19 Software components and their installers for the S pecial Edition : Software component Installer InstallShield Installscript en gine ISSCRIPT10.msi Redistributable v credist_x86.exe (an d vcredist_x64.e xe on 64 -bit systems) packag e(s) vcredist.
15 of 19 This causes software installation via group policy to sometimes take ma ny reboots to actually install managed software (you must reboot at least once after the group policy change just to refresh the policy on the l ocal machine plus once to install t he software.
16 of 19 Deployment - SMS s erver This section describes how to install software components of Scan to PC D esktop onto a client 's system using SMS Server in "Create a n ew package and program" Wizard mode.
17 of 19 Once the necessar y Installscript engine and the r edistributable packages are installed, the different components can be installed in any combination. Note that the installation of PaperPort must pre cede that of Image Retriever, the ODMA Link and the SharePoint Link.
18 of 19 MSIEXEC /i ISSCRIPT10.msi /qn 2. To install t he Installscript engine 8 for some software c omponent, use the following command-line: MSIEXEC /i ISSCRIPT8.msi /qn 3. To install PaperPort Professional 11 , use the following command-line: MSIEXEC /i "ScanSoft PaperPort 11.
19 of 19 Examples (SMS server installation) 1. To install PaperPort Professional 11 with English user interface , use the following command-line: MSIEXEC /i "ScanSoft PaperPort 11.
An important point after buying a device Xerox 10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xerox 10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xerox 10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xerox 10 you will learn all the available features of the product, as well as information on its operation. The information that you get Xerox 10 will certainly help you make a decision on the purchase.
If you already are a holder of Xerox 10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xerox 10.
However, one of the most important roles played by the user manual is to help in solving problems with Xerox 10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xerox 10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
