Instruction/ maintenance manual of the product VSX7EC ML-114822, VSX7EO ML-114821, VSX10EC ML-114824, VSX10EO ML-114823 Vulcan-Hart
Go to page of 12
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201-0696, TEL. (502) 778-2791 INST ALLA TION & OPERA TION MANUAL For additional information on Vulcan-Hart Company or to locate an authorized parts and service provider in your area, visit our website at www.
– 2 – © VULCAN-HART COMPANY, 2003 TABLE OF CONTENTS GENERAL ............................................................................................................................................. 3 INSTALLATION .............................
– 3 – Installation, Operation and Care of VSX7 & VSX10 SERIES ELECTRIC CONVECTION STEAMERS SA VE THESE INSTRUCTIONS GENERAL Models VSX7EC and VSX10EC are mounted on a cabinet base. Models VSX7EO and VSX10EO are mounted on an open base. Models VSX7EC and VSX7EO have a capacity for seven 12" x 20" x 2 1 / 2 " pans.
– 4 – INSTALLATION CODES AND STANDARDS In the United States, the steamer must be installed in accordance with the following: (1) State and local codes and (2) National Electrical Code, ANSI/NFPA-70 (latest edition), available from National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
– 5 – PLUMBING CONNECTIONS WARNING : PLUMBING CONNECTIONS MUST COMPLY WITH APPLICABLE SANITARY, SAFETY AND PLUMBING CODES. Water Supply Connection The water filter, provided, must be installed in the water supply line going to the filtered water inlet or your steamer warranty may be voided.
– 6 – VENT HOOD Some local codes may require the steamer to be located under an exhaust hood. Information on the construction and installation of ventilating hoods may be obtained from NFPA Standard No. 96, Vapor Removal from Cooking Equipment (latest edition).
– 7 – INSTALLATION DRAWINGS Cabinet Base Open Base.
– 8 – MAIN POWER SWITCH ON - The boiler will automatically fill and begin heating to the preset temperature. OFF - The boiler will drain. READY LIGHT - Indicates the temperature has reached 205°F (96°C) and that the steamer is ready to begin cooking.
– 9 – PREHEAT Turn the main power switch to the ON position. When the Ready Light comes on, set the timer to 1 minute to preheat the compartment. This should be done when the steamer is first used for the day or whenever the chamber is cold. The door should be closed during the preheat cycle.
– 10 – Suggested Cooking Guidelines TIMER SETTING WEIGHT PER P AN PRODUCT (minutes) Eggs Scrambled 10 t o 1 2 8 d oz . Hard cooked 1 5 4 doz. Rice, long grain (cover with 4 cups of water/lb.
– 11 – DRAINING THE BOILER Drain the boiler after each day's use to flush out minerals and minimize scale build-up. The boiler drains automatically for approximately 4 to 6 minutes after the main power switch is turned OFF.
– 12 – GUIDELINES FOR MAINTAINING STAINLESS STEEL SURFACES There are three things that can break down stainless steel and allow corrosion to develop: (1) Abrasion, (2) Deposits and water and (3) Chlorides. Avoid rubbing with steel pads, wire brushes or scrapers that can leave iron deposits on stainless steel.
An important point after buying a device Vulcan-Hart VSX7EC ML-114822, VSX7EO ML-114821, VSX10EC ML-114824, VSX10EO ML-114823 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vulcan-Hart VSX7EC ML-114822, VSX7EO ML-114821, VSX10EC ML-114824, VSX10EO ML-114823 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vulcan-Hart VSX7EC ML-114822, VSX7EO ML-114821, VSX10EC ML-114824, VSX10EO ML-114823 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vulcan-Hart VSX7EC ML-114822, VSX7EO ML-114821, VSX10EC ML-114824, VSX10EO ML-114823 you will learn all the available features of the product, as well as information on its operation. The information that you get Vulcan-Hart VSX7EC ML-114822, VSX7EO ML-114821, VSX10EC ML-114824, VSX10EO ML-114823 will certainly help you make a decision on the purchase.
If you already are a holder of Vulcan-Hart VSX7EC ML-114822, VSX7EO ML-114821, VSX10EC ML-114824, VSX10EO ML-114823, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vulcan-Hart VSX7EC ML-114822, VSX7EO ML-114821, VSX10EC ML-114824, VSX10EO ML-114823.
However, one of the most important roles played by the user manual is to help in solving problems with Vulcan-Hart VSX7EC ML-114822, VSX7EO ML-114821, VSX10EC ML-114824, VSX10EO ML-114823. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vulcan-Hart VSX7EC ML-114822, VSX7EO ML-114821, VSX10EC ML-114824, VSX10EO ML-114823 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
