Instruction/ maintenance manual of the product ES25 ML-52642 Vulcan-Hart
Go to page of 20
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201-0696, TEL. (502) 778-2791 INST ALLA TION , OPERA TION SER VICE & P AR TS MANUAL ES, EL & ET STEAM JACKETED KETTLES MODELS ES25 ML-52642 ES30 ML-52643 EL40 ML-52644 ES60 ML-52645 EL80 ML-52646 ET100 ML-52647 ET125 ML-52648 ET150 ML-52649 FORM 30965 Rev.
– 2 – © VULCAN-HART COMPANY, 2003 TABLE OF CONTENTS GE NE RA L .............................................................................................................................................................. 3 INSTALLATION .........
– 3 – Installation, Operation and Care of MODEL ES, EL & ET STEAM JACKETED KETTLES KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE GENERAL Your Vulcan steam jacketed kettle is produced with quality workmanship and material. Proper installation, usage and maintenance will result in many years of satisfactory performance.
– 4 – 3. ANSI NFPA Standard #96 "Vapor Removal from Cooking Equipment," (latest edition), available from the National Fire Protection Association, Batterymarch Park, Quincy, MA 02269. In Canada: 1. Local codes. 2. CSA Standard C22.1 Canadian Electrical Code, Part 1.
– 5 – OPERATION WARNING: THE KETTLE AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE KETTLE. BEFORE FIRST USE Using a non-corrosive, grease-dissolving commercial cleaner, clean the protective metal oils from all surface parts and interior of the kettle.
– 6 – FILLING THE WATER JACKET APPLIANCE FAILURE CAUSED BY INADEQUATE WATER QUALITY IS NOT COVERED UNDER WARRANTY. Fill the outer jacket of the kettle to the top of the band on the gauge glass with a chemically pure distilled water, along with a suitable rust inhibitor.
– 7 – 5. After washing, lubricate the valve body and valve plug with Petro-Gel lubricant. Make sure all interior mating surfaces are covered with this lubrication.
– 8 – MAINTENANCE WARNING: THE KETTLE AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE KETTLE. WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATE THAT YOU ARE WORKING ON THE CIRCUIT.
– 9 – SERVICE WARNING: THE KETTLE AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE KETTLE. WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATE THAT YOU ARE WORKING ON THE CIRCUIT.
– 10 – Low Water Cut-Off This service is indicated if the distilled water in the steam jacket is at the proper level but the switch does not close to make the circuit across the two top terminal s.
– 11 – To replace an element, drain the kettle jacket. Remove the wire from the element terminals, remove the four bolts in the element flange and pull element out. When replacing the element, always use a new gasket. Replace On-Off Switch Remove the large nut on the outside of the control box holding the unit to the box.
– 12 – PARTS LIST NOTE: In ordering parts, always give model number, serial number, volts and phase of the kettle for which they are ordered. ITEM PART NUMBER NUMBER NUMBER DESCRIPTION REQUIRED 1 836799-1 1 1 / 2 " Faucet (Old Style) ........
– 13 – ITEM PART NUMBER NUMBER NUMBER DESCRIPTION REQUIRED 45 Cont. 832611-22 Heating element (21.6 KW, 208V.) ............................................................................ 2 832611-23 Heating element (21.6 KW, 240V.) ..............
– 14 – WIRING DIAGRAM.
– 15 – WIRING DIAGRAM.
– 16 – WIRING DIAGRAM.
– 17 – WIRING DIAGRAM.
– 18 – DIMENSIONS AND SERVICE CONNECTIONS TOTAL CONNECTED AMPS SINGLE PH THREE PH 208V 240V 208V 240V 480V 12 576 50 33.3 28.9 14.4 18 86.6 75 50 43.3 21.7 24 115.4 100 66.7 57.8 28.9 36 N/A N/A 100 86.6 43.2 43.2 N/A N/A 119.9 104 52 DIMENSIONS – METRIC Liters Kilowatts Centimeters Model Capacity Input 2" Draw-Off 3" Draw-Off No.
– 19 – NOTES.
– 20 – NOTES FORM 30965 Rev. A (06-03) PRINTED IN U.S.A..
An important point after buying a device Vulcan-Hart ES25 ML-52642 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vulcan-Hart ES25 ML-52642 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vulcan-Hart ES25 ML-52642 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vulcan-Hart ES25 ML-52642 you will learn all the available features of the product, as well as information on its operation. The information that you get Vulcan-Hart ES25 ML-52642 will certainly help you make a decision on the purchase.
If you already are a holder of Vulcan-Hart ES25 ML-52642, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vulcan-Hart ES25 ML-52642.
However, one of the most important roles played by the user manual is to help in solving problems with Vulcan-Hart ES25 ML-52642. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vulcan-Hart ES25 ML-52642 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
