Instruction/ maintenance manual of the product 20SE Vista
Go to page of 8
VISTA-20 SE 2-PARTITIONED SECURITY SYSTEM PROGRAMMING FORM ® Principal changes between the VISTA-20SE and the former VISTA-20 are indicated by margin lines. VISTA-20PRV4 8/97 (See Instructions N7526V4) Previous Menu Features Q.E.D. programming for quick enrollment of devices.
– 2 – Local programming requires the use of a 2-line Alpha keypad connected to partition 1 keypad terminals on the control. NOTE: For UL installations, the system may be configured as a single partition only.
– 3 – * 36 ENTRY DELAY 2 (zone type 02) | | [60] [60] Part. 1 † Part. 2 † 00-99 = entry delay 2 time for each partition; 50 seconds max. for UL installations * 37 AUDIBLE EXIT WARNING [1] [1] Part. 1 † Part. 2 † 0 = no; 1 = yes * 38 CONFIRMATION OF ARMING DING [0] [0] Part.
– 4 – * 49 SPLIT/DUAL REPORTING [0] 0 = Disable (Backup report only) TO PRIMARY PHONE No. TO SECONDARY PHONE No. 1 = Alarms, Restore, Cancel Others 2 = All except Open/Close, Test Open/Close, Test 3 = Alarms, Restore, Cancel A l l 4 = All except Open/Close, Test A l l 5 = All All TO PRIMARY PHONE No.
– 5 – EXPANSION ZONES: Assign zone numbers (Zn) 10–17 to 4219/4229 Auxiliary Wired Loops A–H, if used. ENTER FOR RF zones can use zone numbers (Zn) 10–31 [ RF ONLY [ ZONE ZONE ZONE PART'N ALARM RPT CODE INPUT LEARNED DESCRIPTION No. TYPE No.
– 6 – TO PROGRAM SYSTEM STATUS, & RESTORE REPORT CODES ( * 59Ð * 76, & * 89): With a 3+1 or 4+1 Standard Format: Enter a code in the first box: 1–9, 0, B, C, D, E, or F. Enter "#+10" for 0, "#+11" for B, "#+12" for C, "#+13" for D, "#+14" for E, "#+15" for F.
– 7 – OUTPUT RELAYS/POWERLINE CARRIER DEVICES WORKSHEET FOR * 80, and * 81. Applicable only if Relays and/or Powerline Carrier Devicess are to be used.
* 8 1 ZONE LISTS FOR OUTPUT DEVICES – This is an interactive mode. Fill in the required data on the worksheet below and follow the procedure in the installation manual as you enter the data during the displays and prompts that appear in sequence. Note: Record desired zone numbers below.
An important point after buying a device Vista 20SE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vista 20SE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vista 20SE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vista 20SE you will learn all the available features of the product, as well as information on its operation. The information that you get Vista 20SE will certainly help you make a decision on the purchase.
If you already are a holder of Vista 20SE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vista 20SE.
However, one of the most important roles played by the user manual is to help in solving problems with Vista 20SE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vista 20SE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
