Instruction/ maintenance manual of the product 1719 AT&T
Go to page of 10
A T&T and the Globe Design are trademar ks of A T&T Corp. licensed to Adv anced American T elephones. © 2002 Advanced Amer ican T elephones. All r ights reserved.
INST ALLA TION Use onl y the power cor d supplied with this product. If you need a replacement, call 1 800 2 22–3111. Input: 120 V , 60 Hz. Output: 6V A C, 350 mA. Modular Telephone Jack Standard Electrical Outlet 1 Connect the telephone line cord. 2 Connect the telephone (optional).
2 FEA TURE SETUP Feature Setup 1 T o enter Feature Setup mode, press and hold S until the system announces “ Number of rings is… ” 2 Press and release S until the system announces the f eature you want to set. 3 Pr ess and r elease a or r until the system announces the setting y ou want.
FEA TURE SETUP Feature Summar y (continued) Feature/System Announces Options Number Announce When this f eature is on, the system will announce (Please see NOTE belo w .) the caller’ s telephone number between the second and third rings. “Number announce is.
4 OPERA TION Set the Clock Y ou must set the clock once so that the system announces the correct day and time with your messag es. After this, if you subscribe to Caller ID , the system will automaticall y r eset the clock eac h time new call inf or mation is receiv ed.
OPERA TION line. The system stops recor ding and resets to answ er calls. If the system doesn’t disconnect immediately , press and r elease the telephone s witchhook. Caller ID Number Announce NOTE: F or these featur es to wor k, y ou m ust subscr ibe to Caller Identif ication ser vice fr om y our tele phone service pro vider .
Message Window Displays DISPLAY Function Cloc k needs to be reset or system is in c lock setting mode. Flashing – System is r ecording an announcement or memo. Steady – Announcement pla ying — OR — system is r ecording a messag e — OR — r emote access is in pr ogress.
7 Press to turn the system on or of f. Off when system is off. System will not answer calls. On steadily when system is on with no new messages. Blinks once for each new message (up to nine). Flashes quickly when memory is full. (Delete messages to make room for new messages.
8 REMOTE OPERA TION Connect with the Answering System Remote Access Commands Function Command Voice help menu Press 5 . Play all messages After the two beeps, wait f our seconds f or system to automatically pla y back all messages, or press 1 . Play new messages Press 2 .
9 • The answ er ing system may not detect the Remote Access Code while your announcement is playing. T r y waiting until the announcement is o v er befor e entering the code. • There ma y be noise interference on the phone line you are using. Press dial buttons firmly .
An important point after buying a device AT&T 1719 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AT&T 1719 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AT&T 1719 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AT&T 1719 you will learn all the available features of the product, as well as information on its operation. The information that you get AT&T 1719 will certainly help you make a decision on the purchase.
If you already are a holder of AT&T 1719, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AT&T 1719.
However, one of the most important roles played by the user manual is to help in solving problems with AT&T 1719. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AT&T 1719 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
