Instruction/ maintenance manual of the product MLC-24 Viking Electronics
Go to page of 4
• Voice mail systems that don’t provide message waiting voltage • Remote voice mail systems • Staff “In - Out” board • “Do Not Disturb” lights • Each MLC-24 controls up to 24 messa.
Installation A. Centrex or PABX Installation with Standard Phones Station/Trunk Switch - Switch to STATION when connecting the "control line" to a C.O. line or an analog PABX/KSU station. Switch to TRUNK when connecting the "control line" to a dedicated phone or unused (loop start) trunk input.
Group Number Assignment 1 - 24 25 - 48 49 - 72 73 - 96 2 OFF OFF ON ON RJ21 Female Connector (not included) RJ21 Male Connector (not included) B. Electronic or Digital Phone Installation with LM-2 Message Waiting Lamps Station/Trunk Switch - Switch to STATION when connecting the "control line" to a C.
Printed in the U.S.A. ZF290220 Rev C Fax Back Doc # 675 Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, its affiliates and/or subsidiaries assume no responsibility for errors and/or omissions contained in this informat ion.
An important point after buying a device Viking Electronics MLC-24 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Viking Electronics MLC-24 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Viking Electronics MLC-24 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Viking Electronics MLC-24 you will learn all the available features of the product, as well as information on its operation. The information that you get Viking Electronics MLC-24 will certainly help you make a decision on the purchase.
If you already are a holder of Viking Electronics MLC-24, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Viking Electronics MLC-24.
However, one of the most important roles played by the user manual is to help in solving problems with Viking Electronics MLC-24. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Viking Electronics MLC-24 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
