Instruction/ maintenance manual of the product VEC011 Vector
Go to page of 6
VEC011 VWC011 USER’S MANUAL & W ARRANTY INFORMA TION IMPORT ANT SAFETY INFORMA TION, SA VE THESE INSTRUCTIONS TO REDUCE THE RISK OF INJURY , USER MUST READ AND UNDERST AND THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONT AINS IMPORT ANT INFORMA TION REGARDING THE OPERA TION AND W ARRANTY OF THIS PRODUCT .
iii CAUTIONS Use only the supplied cords/adapters for recharging this unit. Do not recharge for more than 3-4 hours maximum using 12 volt DC method. Recharge unit after each use. All on/off switches should be in the OFF position when the unit is charging or not in use.
iv 1 T ABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 USING THE UNIT AS A JUMP-ST ARTER This Jump-Starter is equipped with a safety Power Switch that only allows energy to flow when proper connections are made to batter y and frame. Once the connections are properly made, turn the switch ON to jump-start the vehicle.
5 Charging/Rechar ging Lead-acid batteries require routine maintenance to ensure a full charge and long batter y life. All batteries lose energy from self-discharge over time and more rapidly when they are at higher temperatures. Therefore, batteries need periodic charging to replace energy lost through self-discharge.
7 Battery Disposal Contains a maintenance-free, sealed, non-spillable, lead acid batter y , which must be disposed of properly . Recycling is required — contact your local authority for information. Failure to comply with local, state and federal regulations can result in fines or imprisonment.
An important point after buying a device Vector VEC011 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vector VEC011 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vector VEC011 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vector VEC011 you will learn all the available features of the product, as well as information on its operation. The information that you get Vector VEC011 will certainly help you make a decision on the purchase.
If you already are a holder of Vector VEC011, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vector VEC011.
However, one of the most important roles played by the user manual is to help in solving problems with Vector VEC011. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vector VEC011 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
