Instruction/ maintenance manual of the product BB7B Black & Decker
Go to page of 7
13 INSTRUCTION MANUAL Thank you for choosing Black & Decker! Go to www .BlackandDecker .com/NewOwner to register your new product Catalog Number BB7B BEFORE RETURNING THIS PRODUCT FOR ANY REASON PLEASE CALL 1-800-544-6986 BEFORE YOU CALL, HA VE THE CA T ALOG No, AND DA TE CODE A V AILABLE.
• CHECK DAMAGED P ARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation.
CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage. RISK OF UNSAFE OPERA TION. When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal injury .
USING THE SIMPLE ST ART ™ IN BOOST MODE Make sure the unit is sufficiently charged before attempting to use this feature (see the “Charging/Recharging” section on page 8). 1. T urn off headlights, cabin light, radio and all other vehicle accessories before using the SimpleStart ™ in boost mode.
8 USING THE LED AREA LIGHT The LED Area Light is controlled by the Area Light ON/OFF Push button on the top panel of the unit (see page 6). Make sure the LED Area Light is turned OFF when the unit is being recharged or stored. CARE AND MAINTENANCE This product has sealed lead acid batteries that should be kept fully charged.
10 9 2. Remove the 12 Volt DC V ehicle Charging Cord from its storage compartment and plug it into the vehicle’ s 12 volt DC accessor y outlet. 3. Press the Recharge Unit Push button. The unit will beep once again and the Battery Status LED Indicator will flash green , indicating the unit is charging .
12 SPECIFICA TIONS Battery T ype: Three sealed, high energy density , AGM, lead-acid, rechargeable, maintenance-free DC batteries Area Light: Light Emitting Diode (LED) Accessory Outlet: Self-resetting breaker 5 amps AC Charging Adapter: 120 volt AC (500mA, 12 volt DC output) Imported by Black & Decker (U.
An important point after buying a device Black & Decker BB7B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker BB7B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker BB7B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker BB7B you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker BB7B will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker BB7B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker BB7B.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker BB7B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker BB7B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
