EN
Universal Remote Control logo
Official user manual

Universal Remote Control RF20

61 pages·4.1 MB·Universal Remote·PDF·ENDEFRITNLJA
Universal Remote Control RF20
Table of Contents 80 sections simply MORE powerful RF20 · Favorite Channel Setup CUSTOMIZING · Favorite Channel Setup · CUSTOMIZING Favorite Channel Setup · … ShowHide
simply MORE powerful RF20p.1Favorite Channel Setup CUSTOMIZINGp.13Favorite Channel Setupp.13CUSTOMIZING Favorite Channel Setupp.13FAV BUTTONp.13PAUSE BUTTONp.13MacroPower™ Setupp.14CUSTOMIZING MacroPower ™ Setupp.14CUSTOMIZINGp.14SAVE BUTTONp.14MacroPower ™ Setupp.15UNDO BUTTONp.15EXIT BUTTONp.15Advanced Macro Options:p.16SimpleSound™ Setup & Other ‘Punch Throughs’p.16SimpleSound Setup & Other ‘Punch Throughs’p.16VOLUME BUTTONp.16SimpleSound Setup &p.17Other "Punch Throughs"p.17Setting Backlight Optionsp.17MAIN BUTTONp.17UP & DOWNp.17CURSORp.17HIGH CONTRASTp.17LOW CONTRASTp.17Hiding and Adding Pagesp.18CUSTOMIZING Hiding and Adding Pagesp.18PAGE BUTTONp.18COMPONENTp.18BUTTONSp.18MAIN BUTTON EDIT BUTTONp.18Recalling Pre-Programmedp.19Setup Code Numbersp.19Recalling Pre-Programmed Setup Code Numbersp.19Cloning Other RF20sp.19CUSTOMIZING Cloning Other RF20sp.19Erasing Learned Buttons, Macros orp.20Favorite Channelsp.20Erasing Commands - Overviewp.20Erasing Learned Buttons, Macros or Favorite Channelsp.20ERASING COMMANDSp.20SURE BUTTONp.20The Optional PowerBlaster TM (for ‘barrier-free’ RF control) [Sold separately]p.22‘Barrier -Free’ RF controlp.22THE POWER BLASTERp.22Pre-Programmed Code Notesp.23Pre-Programmed Code Tablesp.23AUDIOp.23DVDp.23CDp.23SATp.23TVp.23VCRp.23CABLEp.23AUXp.23LIGHTp.23TAPEp.23PHONOp.23TV2p.23VCR2p.23DVRp.23LDPp.23XM RADIOp.23IPODp.23X-BOXp.23BRAND CODE NUMBERSp.24TV CODE TABLESp.24CODE TABLES TVp.24BRAND CODE NUMBERS BRAND CODE NUMBERSp.25CABLE / WEBTVp.25CODE TABLESp.25BRAND CODE NUMBERS CODE NUMBERS BRANDp.26Frequently Asked Questionsp.34Warrantyp.34Warranty/ Specificationsp.34Specificationsp.34OTHER INFOp.34OTHER INFO Information To The User/Warningp.35Information To The Userp.35NOTE OTHER INFOp.35
Page 1 of the Universal Remote Control RF20 user manual — simply MORE powerful RF20
Page 1 · click to enlarge
Page 1

simply MORE powerful RF20

™

Page 2 of the Universal Remote Control RF20 user manual — simply MORE powerful RF20
Page 2 · click to enlarge
Page 2
1LOCATION OF Keypad Layout 3 CONTROLS GETTING STARTED Overview 4 Congratulations! Battery Installation 4 Activating Component Commands 5 Light Button 6 Congratulations on purchasing Universal experience. Remote Control’s MASTERCONTROL™ The Quick Setup DVD Program Guide BASIC SETUP Overview 7 RF20 Pre-programmed and Learning supplied with the RF20 will assist you in Pre-Programmed Code Method 7 Learning Method 15 Remote Control! programming your remote by guiding you Transmitting (Busy Signal) Icon. 19 You now have the power to control your through an easy step-by-step process. Child Lock Feature 19 entire home entertainment system with This Owner’s Manual is designed as a CUSTOMIZING YOUR RF20 Customizing the LCD Screen 20 one easy-to-use remote. companion reference source to the DVD WITH SPECIAL ADVANCED Favorite Channel Setup 23 The RF20 can be used with thousands of Guide, should you need to refer back to a FEATURES MacroPower™ Setup 26 audio/video Components because of the particular section, or review certain SimpleSound™ Setup & extensive code library pre-programmed instruction detail not covered in the DVD. Other 'Punch Throughs' 30 Setting Backlight Options 32 into the remote. And, the RF20’s However, if you are unable to watch the Hiding & Adding Pages 33 impressive lineup of special advanced DVD Guide for some reason, everything Recalling Pre-programmed features can automate and customize the you need to know about programming the Setup Code Numbers 35 operation of your system in many ways. RF20 is contained in this Manual. Cloning other RF20s 36 So... get ready to sit back, relax and ERASING Overview 37 simplify your home entertainment COMMANDS Erasing Learned Button,Macro or Favorite Channel Commands 37 Re-setting RF20 to Original Factory Default Settings 39 THE OPTIONAL PowerBlasterTM 41 POWERBLASTERTM 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 PREPROGRAMMED Pre Programmed Code Notes 43 CODE NOTES MASTERCONTROL™ RF20 Owner’s Manual © 2006 Universal Remote Control, Inc. PRE-PROGRAMMED Pre-Programmed Code Tables 44 CODE TABLES TV 45 SAT 59 The information in this manual is copyright protected. No part of this manual may be copied or CABLE 48 CD 60 reproduced in any form without prior written consent from Universal Remote Control, Inc. DVD 50 DVR 62 UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR VCR 53 AUX 63 EDITORIAL ERRORS / OMISSIONS MADE IN THIS MANUAL. The information in this manual may be AUDIO 56 subject to change without prior notice. MASTERCONTROL, PowerBlaster, MacroPower, and SimpleSound are trademarks of Universal Remote Control, Inc. All other brand or product names OTHER INFO FAQ 65 Information To The User 67 Warranty 66 Warning 67 are trademarks or registered trademarks of their respective companies or organizations. Specifications 66 NOTE 682 The RF20 RemoteThe RF20 Remote WELCOMECONTNETS MASTERCONTROL™ RF20 Owner’s Manual © 2006 Universal Remote Control, Inc. The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS / OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice. MASTERCONTROL, PowerBlaster, MacroPower, and SimpleSound are trademarks of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.
Page 3 of the Universal Remote Control RF20 user manual — simply MORE powerful RF20
Page 3 · click to enlarge
Page 3
3LIGHT BUTTON SCREEN-LABELED DISPLAY BUTTONS Getting Started-Overview This is what MASTERCONTROL™ RF20 is all about! The RF20 is designed to operate up to 10 different Audio/Video Components and is pre-programmed to operate virtually all brands of TV, VCR, DVD and CD TITLE Players, Cable Set Top Boxes, Satellite Receivers, TiVo and other DVRs, Audio Components, Tape Decks, Multimedia PCs, XM Radio, Ipod, X-Box, Lighting FAVORITE Controls and other custom installation products. It also offers an impressive CHANNEL lineup of special features designed to provide you with many time-saving conPAGE BUTTONS veniences and enhance your overall entertainment experience. However, we chbaunttgoenss t dhies pplaagyee dof strongly recommend that you fully complete all of the Basic Setup steps before PAGE proceeding to customize your RF20 with any of the special advanced features. NUMBERS MAIN BUTTON takes you to the main menu FUNCTION BUTTONS Battery Installation - (negative) symbols. Once the batteries are correctly installed, The very first step is to insert the four replace the cover. AAA batteries that are included in the Now you’re ready to start! package into the battery compartment located in the back of the remote. Just press the tab and lift off the cover. Please be sure to insert the batteries correctly as you see in the diagram. Remember, there is a positive and negative end to each battery and you can tell by the + (positive) and4 Keypad LayoutOverview & Battery Installation CONTROL LOCATIONSGETTING STARTED - (negative) symbols. Once the batteries are correctly installed, replace the cover. Now you’re ready to start!
Universal Remote Control RF20 — simply MORE powerful RF20 diagram (page 3)
Fig. 1 · simply MORE powerful RF20
TITLE FAVORITE CHANNEL PAGE BUTTONS chbaunttgoenss t dhies pplaagyee dof PAGE NUMBERS MAIN BUTTON takes you to the main menu FUNCTION BUTTONS
Page 4 of the Universal Remote Control RF20 user manual — simply MORE powerful RF20
Page 4 · click to enlarge
Page 4
5Activating Component Commands – Light Button Simple, Easy, Intuitive The fully backlit keypad makes the RF20 easy to use in the dark or dim lighting Once you’ve programmed RF20 for your If you don’t see the Component you want conditions. Simply press the LIGHT button to backlight all the keypad buttons and Components, all you have to do to operate to control on Page 1 of the MAIN menu, LCD screen. a specific Component is first, press the just use the PAGE ( ) ( ) buttons on the To turn off the backlight, press the LIGHT button again, or just wait ten seconds (the MAIN button. This will display Page 1 of left side of the screen to bring up Page 2 backlight automatically shuts itself off). Lights out! the MAIN menu on the LCD screen. Page of the MAIN menu which displays an 1 of the MAIN menu displays five additional five Components. Try it out! Components. Then, simply select the Each Component is provided with five Component you want to operate by pages of pre-labeled command display pressing the corresponding Screenbuttons (or space for additional command Labeled Component Display Button on the display buttons). Once again, simply use right side of the LCD Screen. As an the PAGE ( ) ( ) buttons to take you to example, if you press the TV Display the next command page, or return you to Button, the display label at the top of the the previous command page. screen will change from MAIN to TV, and all the buttons on RF20 will work your TV. To operate another Component, simply press the MAIN button again to return to Page 1 of the MAIN menu and select the next Component you want to operate. LIGHT BUTTON TV DEVICE BUTTON MAIN BUTTON6 Activating Component CommandsLIGHT BUTTON GETTING STARTEDGETTING STARTED
Universal Remote Control RF20 — simply MORE powerful RF20 diagram (page 4)
Fig. 2 · simply MORE powerful RF20
Universal Remote Control RF20 — simply MORE powerful RF20 diagram (page 4)
Fig. 3 · simply MORE powerful RF20
Page 5 of the Universal Remote Control RF20 user manual — simply MORE powerful RF20
Page 5 · click to enlarge
Page 5
7Basic Setup - Overview There are two ways to program the RF20: • The Pre-Programmed Code Method • The Learning Method The Pre-Programmed Code Method allows you to set up all the buttons at once, so it’s the fastest and easiest of the two methods. The Learning Method allows you to transfer functions from other remotes (old or new), one button at a time. Pre-Programmed Code Method8 Overview & Pre-Programmed Code MethodPre-Programmed Code Method BASIC SETUPSTEP 1: STEP 2: STEP 3: The pre-programmed 3-digit codes are Now, turn on the Component you want to Press and hold the MAIN and ENT (Enter) butfound in the back of this Manual on page program... let’s say your TV to start. Look tons at the same time for approximately 3 sec45. The codes are listed by Component up your TV’s manufacturer setup code onds, until the word “SETUP” is displayed at the category (i.e., TV, VCR, DVD, etc.), then by from your reference list. top of the LCD screen. This signals that you are brand name. For instance, if you want to now in setup mode. locate a code for a Sony TV, first locate the TV category, and then look for the Sony brand. IMPORTANT: You now have 30 seconds to perform the next step while you are in SETUP mode. If you don’t press a Once you have located the 3-digit code (or button within 30 seconds, SETUP will disappear in some cases, several code numbers) for from the screen, signaling that you have exited setup mode and you will need to start over. the Component that you want to operate with your RF20, write them ALL down on a piece of note paper. It’s important that you write down all the codes because only one code is going to work for you. MAIN BUTTON ENTER BUTTONBASIC SETUP
Universal Remote Control RF20 — simply MORE powerful RF20 diagram (page 5)
Fig. 4 · simply MORE powerful RF20
Page 6 of the Universal Remote Control RF20 user manual — simply MORE powerful RF20
Page 6 · click to enlarge
Page 6
910 Pre-Programmed Code MethodPre-Programmed Code Method BASIC SETUPSTEP 4: The screen will then display the five STEP 5: STEP 6: Press the P-PRO display button Components from Page 1 of the MAIN Press the Component display button you In this step you verify the type of compoto select the Pre-Programmed menu. want to program. nent you plan to operate with this compoMethod. For example: If you want to setup the TV nent button. For example: If you plan To display Page 2 of the MAIN menu Component button, press the TV to operate the TV component with the TV that lists an additional five Components, Component display button. The display at button, simply press the TV display button simply press the PAGE ( ) ( ) buttons. the bottom of the LCD screen will flash once again. However, if for example you FIRST FIVE “FROM - TABLE”. are setting up AUX to operate a second DEVICE NAMES DVD Player, you would first need to press AUX in Step 5, and then DVD in Step 6. P-PRO PAGE BUTTON BUTTONSBASIC SETUP
Universal Remote Control RF20 — simply MORE powerful RF20 diagram (page 6)
Fig. 5 · simply MORE powerful RF20
Universal Remote Control RF20 — simply MORE powerful RF20 diagram (page 6)
Fig. 6 · simply MORE powerful RF20
Universal Remote Control RF20 — simply MORE powerful RF20 diagram (page 6)
Fig. 7 · simply MORE powerful RF20
Page 7 of the Universal Remote Control RF20 user manual — simply MORE powerful RF20
Page 7 · click to enlarge
Page 7
11NOTE: If the Component fails to turn off after you have entered all the code numbers listed for your brand, you can scan through all the other code numbers that are pre-loaded into the RF20 for that Component (in this case TV) by using the UP or DOWN display buttons on the screen. (There is a chance that your Component was actually manufactured by another brand.) However, most of the code tables are so large that it is usually faster to use the Learning Method on Page 15.12 Pre-Programmed Code MethodPre-Programmed Code Methoda BASIC SETUPSTEP 7: STEP 8: Point the RF20 toward the Component you When the Component turns off, press the example, maybe your Sony TV turned off want to program, (in this example, TV), and ON button to turn the Component back on. with code number 147, but the volume punch in the 3-digit code that you wrote Now you can test the Volume and Channel controls did not work properly. If this is down for that specific Component. Use the buttons (for TV), or PLAY and STOP (for the case, try the next code number listed Number buttons 0-9 on the remote to VCR and DVD) to make sure they all work. for that Component until you find a perfect punch in the code. If the 3-digit code If any of the buttons do not work properly, match. number that you just punched in is you need to find a new correct code. For correct, the Component will turn off. If the UP & DOWN ON Component does not turn off, continue BUTTONS BUTTON entering code numbers from your list until VOLUME the Component turns off. Somebrands BUTTONS have several possible code numbers. CHANNEL BUTTONS PLAY NUMBER BUTTON BUTTONS STOP BUTTONBASIC SETUP
Universal Remote Control RF20 — simply MORE powerful RF20 diagram (page 7)
Fig. 8 · simply MORE powerful RF20
Universal Remote Control RF20 — simply MORE powerful RF20 diagram (page 7)
Fig. 9 · simply MORE powerful RF20
Universal Remote Control RF20 — simply MORE powerful RF20 diagram (page 7)
Fig. 10 · simply MORE powerful RF20
Page 8 of the Universal Remote Control RF20 user manual — simply MORE powerful RF20
Page 8 · click to enlarge
Page 8
1314 Pre-Programmed Code MethodPre-Programmed Code Methoda BASIC SETUPSTEP 9: STEP 10 : NOW, PROGRAM THE REST OF YOUR Once you have found the right code, save Exit SETUP mode by pressing the MAIN COMPONENTS BY REPEATING STEPS 1 the code number by pressing the SAVE button two times. THROUGH 9. IN MOST SYSTEMS,YOU display button that appears on the LCD When the LCD screen displays MAIN, you CAN FINISH BASIC SETUP IN JUST A screen. The LCD screen will blink are back in normal operating mode. FEW MINUTES AND PUT ALL YOUR OLD “SAVED” two times, signaling that the REMOTES AWAY. code number has been successfully saved. IF YOU ARE STILL MISSING COMMANDS TO CONTROL ANY OF YOUR COMPONENTS, USE THE LEARNING METHOD ON PAGE 15. MAIN SAVE BUTTON BUTTONBASIC SETUP
Universal Remote Control RF20 — simply MORE powerful RF20 diagram (page 8)
Fig. 11 · simply MORE powerful RF20
Universal Remote Control RF20 — simply MORE powerful RF20 diagram (page 8)
Fig. 12 · simply MORE powerful RF20
Page 9 of the Universal Remote Control RF20 user manual — simply MORE powerful RF20
Page 9 · click to enlarge
Page 9
15Learning Method The RF20 can actually ‘learn’ commands from other remote controls (old or new), one-button-at-a-time, so it will never become obsolete. RF20 is the last remote you’ll ever need! Just follow these simple steps:16 Learning MethodLearning Method BASIC SETUPSTEP 1: STEP 3: STEP 4: Select the Component you want to teach Line-up the RF20 with the other remote control, headPress the LEARN display button on the LCD commands to by pressing that Component to-head, one or two inches apart. screen. The top of the screen will change to display button on the LCD screen (in this STEP 2: “LEARN” and display the five Components example, TV). The top of the TV screen will from Page 1 of the MAIN menu. change to “TV”. On the RF20, press and hold the MAIN and ENT (Enter) buttons at the same time for approximately three seconds, until the word “SETUP” is displayed at the top of the LCD screen. This signals you are now in SETUP To display Page 2 of the MAIN menu that mode. lists an additional five Components, NOTE: If you want to teach any command to a simply press the PAGE ( ) ( ) buttons. Component button, press the desired Component IMPORTANT display button once the top of the screen disYou now have 30 seconds to perform the plays “MAIN”, by pressing the PAGE button. The next step while you are in SETUP mode. If top of the screen wil change to “READY”. Then you don’t press a button within 30 seconds, go to STEP 6. SETUP will disappear from the screen, signaling that you have exited setup mode and you will need to start over. LEARN BUTTON MAIN BUTTON ENTER BUTTONBASIC SETUP
Universal Remote Control RF20 — simply MORE powerful RF20 diagram (page 9)
Fig. 13 · simply MORE powerful RF20
Universal Remote Control RF20 — simply MORE powerful RF20 diagram (page 9)
Fig. 14 · simply MORE powerful RF20
Page 10 of the Universal Remote Control RF20 user manual — simply MORE powerful RF20
Page 10 · click to enlarge
Page 10
1718 Learning MethodLearning Method BASIC SETUPSTEP 5: Some additional Information regarding the NOTE: Test all your new commands. If any of them Press any button on the RF20 that you don’t work, try the Learning Method again, followLearning Process: want to teach a command to. The top of STEP 7: ing these suggestions: • Learned functions override any existing the screen will change to “READY” and Now, continue to teach the RF20 any other • Move to another room. Plasma TVs, sunpre-programmed functions on the the bottom of the screen will display the commands from your other remotes by light, halogen or quartz lighting can interremote control. button name you pressed. repeating STEPS 4 through 6 (to go back fere with the learning process. to STEP 4, simply press MAIN once). • All buttons can be learned except for the • Even though the old remote seems to be PAGE, MAIN and LIGHT buttons. STEP 8: NOTE: If you don't see the display button you Once you have completed teaching all the working fine, put in fresh alkaline • Learned functions are automatically would like to teach on the LCD screen, use the batteries. PAGE ( ) ( ) buttons. The only buttons you button commands to the RF20, return to erased when a new function is learned can't teach are the PAGE and MAIN buttons. normal operation by pressing the MAIN • Gradually vary the distance between the on the same button. STEP 6: button twice. remote controls. • Learned functions are retained even Try 1”, 2” and so on, up to 4 feet. Press and hold the button on the other after a different Setup Code Number is remote control that you want to ‘teach’ to • Try tapping the button on your old remote programmed into the remote. the RF20 until the LCD display on the RF20 instead of pressing and holding it during changes to either “GOOD” or “FAILD”. If the learning process. • To return to an original pre-programmed the “GOOD” label appears on top of the function, a learned function must be display, you were successful. If the erased. “FAILD” label appears on top of the display, try ‘teaching’ thesame button to the RF20 once again by repeating STEPS 5 and 6.BASIC SETUP
Page 11 of the Universal Remote Control RF20 user manual — simply MORE powerful RF20
Page 11 · click to enlarge
Page 11
19Transmitting (Busy Signal) Icon Customizing Your RF20 with Special Advanced Features After you’ve finished all your basic setup, you can choose to make operation easier by When a command is being transmitted, an icon will appear in the upper right corner of the customizing the RF20 just the way you want, using the Special Advanced Setup Features LCD screen. This indicates that a signal is being sent. This is particularly useful when described in this section. setting up Macros and FAVs, since it flashes with every step of a sequence of commands. Customizing the LCD Screen You can easily edit or change the name of any of the display buttons (including Favorite Channels) on the LCD screen by following these steps:20 Transmitting (Busy Signal) IconCustomizing the LCD Screen BASIC SETUPCHILD LOCK FEATURE STEP 1: STEP 3: Press and hold the MAIN and ENT (Enter) Press the TEXT display button. This ‘child-lock’ feature prevents the unauthorized use of the remote control by buttons at the same time for approximately The screen will display the list of children. It blocks all operations of the remote control. 3 seconds, until the word “SETUP” is Components and “EDIT” will appear at displayed at the top of the LCD screen. the top of the screen. To Activate: This signals that you are now in setup STEP 4: Press the +10 and ENT (Enter) buttons simultaneously for 3 seconds. The bottom of mode. Navigate to the Component and page the LCD will blink “LOCKED” three times and then display “LOCKED”. where there is a button label you want to IMPORTANT:You now have 30 seconds to perTo Return to Normal Operation: form the next step while you are in SETUP EDIT, selecting between the FAV, MAIN, Press the +10 and ENT (Enter) buttons simultaneously again for 3 seconds. The LCD mode. If you don’t press a button within 30 secCOMPONENT display buttons; then using onds, SETUP will disappear from the screen, will display the last use mode. signaling that you have exited setup mode and the PAGE button. you will need to start over. STEP 2: NOTE: If you wish to change the name of a Component button, press the Page ( ) Up Press the EDIT display button. button twice. The top of the display will The LCD display will change to the EDIT change to MAIN, and you can navimenu. gate to MAIN page 1 or page 2 before going on to Step 5.CUSTOMIZING
Page 12 of the Universal Remote Control RF20 user manual — simply MORE powerful RF20
Page 12 · click to enlarge
Page 12
2122 Customizing the LCD ScreenCustomizing the LCD Screen CUSTOMIZINGSTEP 5: STEP 6: STEP 7: Press the button you wish to edit. Change the character by using any of the Once the character you want appears, The first character space of your number keys. move to the next space by pressing the button label will start to blink. Each press of the same number button Right cursor button. UP CURSOR selects the next character of that STEP 8: number’s group, as shown in the Button deletes all text When you are finished editing the button, diagram below. LEFT CURSOR press the button you edited and “SAVED” M co hv ae ras c b teli rn k lei fn tg will flash at the bottom of the display. DOWNCURSOR deletes the currently To change any other button labels on the blinking character RIGHT CURSOR same Component, press the next button, Moves blinking then repeat steps 6-8. If you wish to edit a character right button on another Component, press the BLINKING CHARACTER MAIN button once, then repeat Steps 4-8. STEP 9: Once you’ve finished editing buttons, press the MAIN button four times to return to normal operation.CUSTOMIZING
Universal Remote Control RF20 — simply MORE powerful RF20 diagram (page 12)
Fig. 15 · simply MORE powerful RF20
Universal Remote Control RF20 — simply MORE powerful RF20 diagram (page 12)
Fig. 16 · simply MORE powerful RF20
Page 13 of the Universal Remote Control RF20 user manual — FAV BUTTON
Page 13 · click to enlarge
Page 13

Favorite Channel Setup CUSTOMIZING

Favorite Channel Setup

CUSTOMIZING Favorite Channel Setup

This is one of RF20’s most desirable features. Once it’s set up, you can select up to 40 favorite channels with the press of a button - without the need to remember or type in a channel number. Let the channel surfing begin!

To access Favorite Channel listings, simply press the FAV button to display Page 1 of Favorite Channel listings. There are eight pages of Favorite Channels, with five Channels on each page, for a total of 40 Channels. Just use the PAGE (

) buttons to locate the Channel you want to setup. Each Channel can be setup to be instantly selected with the press of one button.

To setup a Favorite Channel button, follow these steps:

3. Use the PAGE (
5. Press either the TV, SAT or CABLE Component button (select the Component you use to enter channel numbers).

) buttons until you locate the name (i.e.,ABC, CBS, NBC) of the favorite channel you want to setup.

1. Press and hold the MAIN and ENT (Enter) buttons at the same time for approximately 3 seconds, until the word “SETUP” is displayed at the top of the LCD screen. This signals that you are now in setup mode.
2. Press the FAV display button.

The top of the display will show “FAV”. The bottom of the display will flash “SELECT”

4. Press the favorite channel display button you want to setup. The top of the screen will change to show the channel name. The bottom of the screen displays “STEP0”, indicating that you have not entered the channel number yet.
6. Press each of the number buttons for the channel.
Universal Remote Control RF20 — Favorite Channel Setup CUSTOMIZING diagram (page 13)
Fig. 17 · Favorite Channel Setup CUSTOMIZING
Universal Remote Control RF20 — Favorite Channel Setup CUSTOMIZING diagram (page 13)
Fig. 18 · Favorite Channel Setup CUSTOMIZING

FAV BUTTON

PAUSE BUTTON

)( · ) (

Page 14 of the Universal Remote Control RF20 user manual — SAVE BUTTON
Page 14 · click to enlarge
Page 14

Favorite Channel Setup

MacroPower™ Setup

CUSTOMIZING MacroPower ™ Setup

MacroPower™ is a unique feature that enables you to turn all of your Components ON or OFF, at the same time, simply with the press of one button. We call that a “Macro”. What would normally take multiple remotes and button pushes, the RF20 can accomplish with the press of one button. In addition to the Power ON or OFF buttons, any of the Display buttons (on any Component or Page) can be set to be Macro buttons as well. Feel the power!

To setup a Power ON macro button that will turn ON several components at the same time (for example, TV, VCR and CABLE), follow these easy steps:

7. Press the LIGHT button after you enter the channel number. A new screen appears displaying SAVE, UNDO or EXIT.
9. When you are finished setting up Favorite Channel buttons, press the MAIN button twice to return to normal operation.
1. Press and hold the MAIN and ENT (Enter) buttons at the same time for approximately 3 seconds, until the word “SETUP” is displayed at the top of the LCD touch screen. This signals that you are now in setup mode.
4. Press the first component display button you want the Macro to turn on (in this example, TV) and “TV” will display at the top of the screen and “STEP 1” at the bottom.
8. To save the channel you entered, press the SAVE display button. The UNDO display button lets you erase the last entry. The EXIT display button erases all entries for this button.
5. Then, press the ON button to confirm the command and “STEP 2” will display at the bottom of the screen. (NOTE: Whenever a button is pressed, another Macro step is counted and dis-played at the bottom of the screen.)

CUSTOMIZING

Universal Remote Control RF20 — CUSTOMIZING diagram (page 14)
Fig. 19
2. Press the MACRO display button on the LCD screen. The top of the screen will display “MACRO”. The bottom of the display will flash “SELECT”.
6. Now, press the MAIN button to return to the Main Component listing. (“STEP 3” will display at the bottom of the screen.)
3. Press the ON button. “ON” will display at the top of the LCD screen. “STEP0” will display at the bottom of the screen indicating that no macro steps have been entered yet.

SAVE BUTTON

Page 15 of the Universal Remote Control RF20 user manual — EXIT BUTTON
Page 15 · click to enlarge
Page 15

MacroPower ™ Setup

MacroPower ™ Setup

7. Press the second component display button that you want the Macro to turn on (in this example, VCR) and “VCR” will display at the top of the screen. (“STEP 4” will display at the bottom of the screen.)
11. Then, press the ON button to confirm the command. (“STEP 8” will display at the bottom of the screen.)
12. Press the LIGHT button to end your macro. A new screen will appear:
13. If you are satisfied with your macro, press the SAVE display button. The UNDO display button lets you erase the last step. The EXIT display button erases all the macro steps.
8. Then, press the ON button to confirm the command. (“STEP 5” will display at the bottom of the screen.)
14. Press the MAIN button twice to return to normal operation.

You can also program delays in between commands by pressing the (II) PAUSE button. Each press adds half a second to the delay.

CUSTOMIZING

CUSTOMIZING

9. Now, press the MAIN button to return to the Main Component listing. (“STEP 6” will display at the bottom of the screen.)
Universal Remote Control RF20 — CUSTOMIZING diagram (page 15)
Fig. 20

SAVE BUTTON

UNDO BUTTON

10. Press the third component display button that you want the Macro to turn on (in this example, CABLE) and “CABLE” will display at the top of the screen. (“STEP 7” will display at the bottom of the screen.)

EXIT BUTTON

Page 16 of the Universal Remote Control RF20 user manual — VOLUME BUTTON
Page 16 · click to enlarge
Page 16

CUSTOMIZING MacroPower ™ Setup

Advanced Macro Options:

SimpleSound™ Setup & Other ‘Punch Throughs’

SimpleSound Setup & Other ‘Punch Throughs’

SETTING UP A POWER OFF MACRO: Simply follow the same steps as outlined above, except press the OFF button in place of the ON button.

SimpleSound™ is a dynamic feature that gives you total volume control over all the Components in your system, even those without their own built-in volume control, such as TiVo, DVD and VCR... saving you the hassle and inconvenience of constantly needing to switch between Component modes on the remote. With SimpleSound™, you can set the RF20’s volume control buttons to always control the sound in your system, even when you’re in VCR or DVD mode, without switching back to AUDIO or TV. Even more exciting, SimpleSound™ is what is called a ‘Punch Through’ feature and is not limited strictly to volume control. Click and enjoy!

SETTING A COMPONENT BUTTON AS MACRO: If you wish to set one of the Component buttons as a macro, in STEP 3, press the Page Up button twice. The top of the display will change to MAIN, and you can navigate to MAIN page 1 or page 2. Press the Component button you want to set as a Macro button. The top of the screen will display the button label you selected. Select the Component and Page that has a button you want in your Macro using the MAIN, Component and Page buttons. Simply press the button(s) with the command(s) you want in your Macro. Then complete and save the Macro by following STEPs 12 and 13 as outlined above.

1. In a basic home entertainment system, the sound may come from your TV. In a more advanced system, the sound may come from your audio Component such as a Surround Sound Receiver or Home Theatre system. So, first, you need to identify which Component you want to use in your system for sound.

seconds, until the word “SETUP” is dis- played at the top of the LCD screen. This signals that you are now in setup mode.

PROGRAMMING A “PRESS & HOLD” MACRO: Another option for Component button macros is to only send the macro if the button is pressed and held. This is setup by entering a delay as the first step of the macro. The amount of delay determines how long the user must press the button before the macro is sent. The advantage of this option is that a normal press of the COMPONENT button will simply switch Components without sending the macro command.

3. Press the PAGE (
2. Press and hold the MAIN and ENT (Enter) buttons at the same time for approximately 3

) UP button to display Page 2 of the Setup Menu on the LCD screen. Press the PUNCH display button.

Universal Remote Control RF20 — CUSTOMIZING MacroPower ™ Setup diagram (page 16)
Fig. 21 · CUSTOMIZING MacroPower ™ Setup
4. Then press the VOL (Volume) display button. The screen will display “VOL” at the top. This sets up the group of three buttons (Volume Up, Volume Down and Mute) in one action!

CUSTOMIZING

VOLUME BUTTON

Page 17 of the Universal Remote Control RF20 user manual — LOW CONTRAST
Page 17 · click to enlarge
Page 17

SimpleSound Setup &

Other "Punch Throughs"

Setting Backlight Options

Setting Backlight Options

You can customize the backlighting feature to suit your specific preferences by fol- lowing these simple steps:

Adjusting Length of Backlight Time You can adjust the amount of time that the RF20 backlight stays on by entering the SETUP mode and proceeding to page 2 (using the PAGE (

) UP button), then pressing the LIGHT display button on the LCD screen (not the Backlight button). Then enter the amount of time you would like the light to stay on using the number pad (0-99 sec- onds). After making your selection, press the SAVE display button.

Adjusting Contrast You can make the text darker by pressing both the MAIN and cursor UP buttons at the same time. To make the text appear lighter, press both the MAIN and cursor DOWN buttons at the same time.

The bottom of the display flashes “PUNCH TO”. Press the button for the Component that doesn’t have volume control commands yet (i.e.,DVD). This is the Component you are going to PUNCH TO for the volume and mute commands.

6. Repeat STEPS 4-5 until all your Components operate the volume perfectly.
7. Press the MAIN button twice to return to normal operating mode and test your SimpleSound™ settings.

Turning OFF Backlighting If you don’t want backlighting at all (this extends battery life), press the ON display but- ton that appears on the screen. The ON will change to OFF. Press the SAVE display button. Exit the setup mode by pressing the MAIN button.

NOTE: If you want to PUNCH TO the MAIN Component, press the POWER OFF button at this time. NOTE: The Punch Through feature is not limited to volume and can also be applied to channel selection or other functions. If you find yourself switching to a particular Component frequently to use a group of controls, consider using Punch Through for another group, as listed here:

MAIN BUTTON

CUSTOMIZING

5. The bottom of the display will then flash “PUNCH FROM”. Now select the Component that has the volume commands you want to use (i.e.,TV for systems using the TV speakers, AUDIO for systems with surround sound receivers). The bottom of the display will flash “SAVED”.

UP & DOWN

CUSTOMIZING

CURSOR

HIGH CONTRAST

VOL Volume Up,Volume Down and Mute CH Channel Up, Channel Down, Previous Ch and Channel (0-9) buttons. PLAY Play, Stop, Pause, Rewind and Fast Forward VOD Guide, Menu, Info, Exit, Up, Down, Left, Right, Select

LOW CONTRAST

Universal Remote Control RF20 — LOW CONTRAST diagram (page 17)
Fig. 22

Simply perform the steps outlined above, but in STEP 4, press one of the control options (CH, PLAY or VOD).

Page 18 of the Universal Remote Control RF20 user manual — BUTTONS
Page 18 · click to enlarge
Page 18

Hiding and Adding Pages

Hiding and Adding Pages

CUSTOMIZING Hiding and Adding Pages

Each of your RF20 Components actually contains eight pages. However, only five pages are visible in the factory default setting. Three page are hidden in each Component. If you wish to use the hidden pages, you can ADD it. If you don’t want to use some of the existing pages, you can HIDE them. You can add or hide pages on Components OR on your favorite channel pages using this simple process:

This page is hidden. To ADD

This page is visible.To HIDE

it, press the LIGHT button.

it, press the LIGHT button.

1. Press and hold the MAIN and ENT (Enter) buttons at the same time for approximately 3 seconds, until the word “SETUP” is displayed at the top of the LCD screen. This signals that you are now in setup mode.
2. Press the EDIT display button on the LCD screen.
4. “PAGE” appears at the top of the screen. Now, you can navigate to any page, using the MAIN, COMPONENT, FAV, and PAGE display buttons.
5. When you select a page, the top of the screen indicates whether you want to “ADD?” or “HIDE?” the page displayed. When you want to change a page’s visibility (i.e., either ADD or HIDE), simply press the LIGHT button.
3. Press the PAGE display button once the screen changes to EDIT mode.

PAGE BUTTON

FAV BUTTON

COMPONENT

6. You can continue to ADD or HIDE pages on other Components by repeating Steps 4 and 5.

BUTTONS

CUSTOMIZING

MAIN BUTTON EDIT BUTTON

PAGE BUTTON

Universal Remote Control RF20 — BUTTONS diagram (page 18)
Fig. 23
Universal Remote Control RF20 — BUTTONS diagram (page 18)
Fig. 24
Universal Remote Control RF20 — BUTTONS diagram (page 18)
Fig. 25
7. When you are finished adding and hiding pages, press the MAIN button four times to return to normal operation.
Page 19 of the Universal Remote Control RF20 user manual — CUSTOMIZING
Page 19 · click to enlarge
Page 19

Recalling Pre-Programmed

Setup Code Numbers

Recalling Pre-Programmed Setup Code Numbers

Cloning Other RF20s

CUSTOMIZING Cloning Other RF20s

In case you didn’t write down the Pre-Programmed Code Numbers that you used to set up your RF20, you can easily recall them using this simple process:

If you are fortunate enough to own more than one RF20, you’ll be happy to know that you can easily copy and transfer all the setup from one RF20 to another. Just follow these easy steps:

1. Press and hold the MAIN and ENT (Enter) buttons at the same time for approximately 3 seconds, until the word “SETUP” is displayed at the top of the LCD touch screen. This signals that you are now in setup mode.

alternately flashing Page 1 components and code numbers, then Page 2 compo- nents and code numbers.

1. For both the programmed RF20 that you want to clone, and unprogrammed RF20, press and hold the MAIN and ENT (Enter) buttons at the same time for pproximately 3 seconds, until the word “SETUP” is displayed at the top of their respective LCD screens. This signals that both remotes are now in setup mode.
4. Align the two RF20s head-tohead, about an inch apart.
4. Write down the code numbers as they appear for future reference. Page 43 of this manual provides a convenient space for you to record your code numbers.
5. Press the RECV display button on the unprogrammed RF20 that you want to setup by cloning.
6. Press the SEND display button on the programmed RF20 that you want to clone.

CUSTOMIZING

5. Return to normal operation by pressing the MAIN button twice.
7. Press the START button on the unprogrammed RF20, and then press the START button on the programmed RF20 that you want to clone.
2. Go to Page 2 of the Setup Menu by pressing the PAGE (
2. Press a PAGE button on each remote to bring up Page 2 of Setup and display the CLONE button.

) button. STEP 3: Press the RECAL display button on the LCD screen. The display will change to the Recall screens. The screen automati- cally switches between four screens,

3. Press the CLONE button on each remote.
8. Return to normal operation by pressing the MAIN button twice.
Page 20 of the Universal Remote Control RF20 user manual — SURE BUTTON
Page 20 · click to enlarge
Page 20

Erasing Learned Buttons, Macros or

Favorite Channels

Erasing Commands - Overview

Erasing Learned Buttons, Macros or Favorite Channels

You can erase an individual button with a learned command, a macro or a favorite channel. You can erase an ENTIRE Component’s learned command or macro buttons. You can also erase ALL your learned commands on all Components or all your macros or favorite channels everywhere.

If you really want a fresh start, it is possible to reset everything to the factory default settings.

Erasing Learned Buttons, Macros or Favorite Channels

1. Press and hold the MAIN and ENT (Enter) buttons at the same time for approximately 3 seconds, until the word “SETUP” is displayed at the top of the LCD screen. This signals that you are now in setup mode.
2. Press a PAGE button to display Page 2 of Setup.
5. If you press ALL, the RF20 displays a “SURE?” button. After the SURE button is pressed, all the buttons will be erased.
6. To return to normal operating mode, press the MAIN button four times.
3. Press the ERASE display button on the LCD screen.

If you press DEVICE, a list of Components will appear. Press the Component button that you wish to erase. The bottom of the screen will flash ERASE twice, then ERASED.

ERASING COMMANDS

ERASING COMMANDS

4. Press either the LEARN, MACRO or FAV button. The following screen appears:

If you press KEY, you’ll have to navigate to the Component and Page you want using the MAIN, COMPONENT and PAGE buttons. Press a button to erase it. The bottom of the display will flash ERASE twice, then ERASED.

Universal Remote Control RF20 — ERASING COMMANDS diagram (page 20)
Fig. 26

ALL - Erases ALL of the specified (Learned, Macro or FAV but-tons every- where in the RF20)

Universal Remote Control RF20 — ERASING COMMANDS diagram (page 20)
Fig. 27

DEVICE - Erases all learned or Macro buttons in a single Component (NOTE: This option is not available for FAVs.)

SURE BUTTON

KEY - Erases one button only.

Page 21 of the Universal Remote Control RF20 user manual — Erasing Learned Buttons, Macros or
Page 21 · click to enlarge
Page 21
Universal Remote Control RF20 — Erasing Learned Buttons, Macros or diagram (page 21)
Fig. 28 · Erasing Learned Buttons, Macros or

If you want to start with a clean slate, you can re-set the RF20 its original factory default settings by performing the following steps.

1. Press and hold both the MAIN and the STOP buttons for 10 seconds.
2. After 10 seconds, the RESET screen appears. Press the ALL button. The RF20 will display a “SURE?” button. Press the SURE button to erase all of your settings and return to the factory default setup
Page 22 of the Universal Remote Control RF20 user manual — THE POWER BLASTER
Page 22 · click to enlarge
Page 22

The Optional PowerBlaster TM (for ‘barrier-free’ RF control) [Sold separately]

‘Barrier -Free’ RF control

The RF20 sends radio signal to the PowerBlasterTM, which is a radio receiver

‘Barrier -Free’ RF control

Of all the fabulous RF20 features, this is probably the most exciting. When used in combination with the optional PowerBlasterTM, the RF20 becomes an amazing remote control powerhouse that sends multi-directional RF (Radio Frequency) signals that pass through walls, doors and floors - both indoors and outdoors.

Universal Remote Control RF20 — ‘Barrier -Free’ RF control diagram (page 22)
Fig. 29 · ‘Barrier -Free’ RF control

This changes everything! It enables you to control Components that are completely out-of-sight, up to 100’ away. The PowerBlasterTM picks up RF20’s radio frequency signals from any direction, regardless of distance, so RF20 doesn’t need to be pointed directly at any Component. Just imagine - no more pointing! Now you can close your entertainment center doors, hide your Components, and still control them with ease. Control outdoor speakers on your patio. Control your Components anywhere!

The PowerBlasterTM converts radio signals to standard infrared commands and sends them out via a built-in front blaster to Components in the same cabinet space.

One of the best things about this is -- nothing has to be done to the RF20 for this feature to work. Every time you press a button on the RF20, it sends both a standard IR (Infrared Command) AND an RF (Radio Frequency) signal. If you install the PowerBlasterTM kit, it will automatically receive RF20’s radio signals and trans- late them into the infrared commands that control your Components.

THE POWER BLASTER

THE POWER BLASTER

Universal Remote Control RF20 — THE POWER BLASTER diagram (page 22)
Fig. 30

NOTE: The RF20's radio signals will not control Components directly. You must have a PowerBlasterTM to receive the RF20's radio signals. Components that came with "no pointing" radio remote controls cannot be operated by the RF20 unless the Component can be switched to standard IR (Infrared Control) via its internal menus. Some remote control ceiling fans are radio only and cannot be operated by the RF20.

Self-adhesive “flashers” (included in the PowerBlasterTM kit) affix to the front panels of your Components. The flashers relay infrared commands to Components out-of-sight of the PowerBlaster’s front blaster. The flashers plug into PowerBlaster’s rear flasher line output jacks. Each flasher has a 10’ cable to easily reach Components on nearby shelves.

Page 23 of the Universal Remote Control RF20 user manual — IPOD
Page 23 · click to enlarge
Page 23

Pre-Programmed Code Notes

Pre-Programmed Code Notes

Pre-Programmed Code Tables

Pre-Programmed Code Tables

Record the three digit codes for your system here

The RF20’s Pre-Programmed code library is divided into categories (TV, VCR, AUX, etc.). Each category actually includes many types of Components. For example, the VCR category includes TV/VCR combo units.

AUDIO

DVD

Within each category, the code numbers are listed in rows by brand (Sony, Panasonic, B & K, etc.). Some brands have more than one three digit code for you to try. Just circle the correct row and refer to it while you setup (step by step instructions for using Pre-Programmed codes are found on page 7).

CD

SAT

TV

PRE-PROGRAMMED CODE NOTES

VCR

PRE-PROGRAMMED CODE TABLES

TV TVs, Plasmas, Projectors and Monitors

CABLE

CABLE Cable TVs and Web TVs

AUX

LIGHT

DVD DVD Players and TV/DVD Combos

TAPE

VCR VCRs and TV/VCR Combos

PHONO

AUDIO Amps, Preamps, A/V Receivers and XM Radios

TV2

VCR2

CD CD Players and CD Changers

DVR

LDP

DVR TiVo, Replay and other DVR’s

XM RADIO

AUX Tape Decks, Lighting Controls, Multimedia PCs, Xbox, iPod and Custom Installation Products

IPOD

X-BOX

SAT Satellite Receivers

Page 24 of the Universal Remote Control RF20 user manual — CODE TABLES TV
Page 24 · click to enlarge
Page 24

BRAND CODE NUMBERS

BRAND CODE NUMBERS

TV CODE TABLES

ADMIRAL 072 081 161 160 ADVENT 247 AKAI 197 146 248 404 405 A MARK 112 143 AMPRO 167 073 157 183 AMSTRAD 052 ANAM 043 054 056 080 112 131 AOC 197 004 112 058 APEX DIGITAL 006 310 AUDIOVOX 076 273 BARCO 233 BLAUPUNKT 088 BROKSONIC 238 CAIRN 201 CANDLE 197 002 003 004 CAPEHART 058 CETRONIC 043 CITIZEN 197 002 003 004 043 101 103 143 CLASSIC 043 CONCERTO 004 CONTEC 043 050 051 CORONADO 143 CRAIG 043 054 CROWN 043 143 CURTIS MATHES 197 101 004 143 CXC 043 DAEWOO 004 016 043 044 076 103 114 125 127 143 DAYTRON 004 143 DELL 320 319 321 DREAMVISION 235 345 DWIN 177 257 DYNASTY 043 DYNATECH 062 EIKI 187 ELECTROHOME 143 024 076 196 EMERSON 028 048 043 155 005 197 004 047 050 051 076 096 143 151 153 154 EPSON 324 ESA 323 FISHER 007 057 FUJITSU 246 198 346 FUNAI 028 043 FUTURETECH 043 GATEWAY 242 268 GE 160 144 165 073 197 008 009 034 056 074 130 155 161 004 091 157 183 GEM 387 GOLDSTAR 113 116 102 004 106 112 119 127 143 HALL MARK 004 HANNSPREE 381 HITACHI 011 163 166 004 009 010 012 023 075 143 158 072 HP 378 316 327 HYUNDAI 337 338 INFINITY 164

INFOCUS 333 230 330 INSIGNIA 350 399 403 052 164 JBL 164 JCPENNEY 004 024 197 008 009 030 065 101 143 156 160 JENSEN 013 JVC 038 034 070 083 145 199 210 240 241 KEC 043 KENWOOD 197 070 KLOSS 002 059 KMC 143 KTV 043 197 143 154 LG 363 113 116 102 004 106 112 119 127 143 243 284 365 LODGENET 072 LOEWE 164 LOGIK 072 LUXMAN 004 LXI 166 007 015 052 081 160 164 MAGNAVOX 164 059 197 003 060 061 004 063 064 127 022 160 094 239 226 273 390 MARANTZ 197 164 184 MATSUI 164 MAXENT 242 MEMOREX 007 072 004 METZ 088 MGA 197 004 024 028 042 MINERVA 088 MINTEK 362 MITSUBISHI 124 109 024 004 028 040 042 146 191 MTC 197 004 062 101 NAD 015 025 NEC 272 132 130 134 197 040 016 024 056 019 236 262 NIKEI 043 NUVISION 351 ONKING 043 ONWA 043 OPTOMA 265 270 OPTONICA 019 081 ORION 096 PANASONIC 080 034 056 092 164 208 PHILCO 197 003 059 060 064 164 004 024 056 063 PHILIPS 164 005 093 038 197 003 004 059 127 184 206 239 259 PIONEER 335 135 025 197 018 023 116 393 272 POLAROID 138 268 328 353 354 356 388 PORTLAND 004 143 PROSCAN 144 160 161 165 167 PROTON 004 131 058 143 171 173 193 PROTRON 392 398 QUASAR 034 056 092 RADIO SHACK 019 004 143 043 127 RCA 333 160 165 065 156 144 161 197 004 024 056 152 023 074 REALISTIC 007 019 043 047 ROCTEC 186 RUNCO 168 169 178 179 180 181 182 183 073 157 340 395 SAMPO 197 058 004 202

CODE TABLES TV

Page 25 of the Universal Remote Control RF20 user manual — CABLE / WEBTV
Page 25 · click to enlarge
Page 25

BRAND CODE NUMBERS BRAND CODE NUMBERS

TV

SAMSUNG 258 050 089 101 105 004 127 143 160 228 229 SANYO 166 007 020 053 057 082 187 SCEPTRE 276 SCOTT 028 043 004 048 143 SEARS 015 030 004 007 028 057 143 094 160 082 165 166 SELECO 189 200 205 227 SHARP 251 081 019 014 170 028 029 004 022 143 175 SIEMENS 088 SIM2 189 200 205 227 SIGNATURE 072 SOLE 231 232 SONY 277 070 139 147 126 185 194 085 213 279 SOUNDESIGN 028 004 003 043 SPECTRICON 112 SSS 004 043 SUPRE MACY 002 SVA 328 SYLVANIA 197 003 059 060 063 064 164 044 160 127 SYNTAX OLEVIA 376 363 TANDY 081 TATUNG 056 062 TECHNICS 034 080 TECHWOOD 004 TEKNIKA 002 003 004 024 028 043 072 101 143 TELEFUNKEN 037 046 086 087 TELERENT 072 TERA 172 TMK 004 TOSHIBA 138 015 030 007 040 062 101 325 TOTEVISION 143 UNIVERSAL 008 009 VIDEO CONCEPTS 146 VIDIKRON 174 184 188 192 340 VIDTECH 004 VIEWSONIC 242 389 390 VIZIO 386 387 WARDS 004 008 009 019 028 060 061 063 064 072 074 143 164 034 WESTING HOUSE 076 280 WINBOOK 339 YAMAHA 197 004 YORK 004 YUPITERU 043 ZENITH 073 072 095 103 157 183 243 284 ZONDA 112

ABC 004 103 003 039 042 046 053 ADELPHIA 043 074 ADVANCED NEWHOUSE 043 ALTRIO 043 AMERICAST 099 ARCHER 005 007 014 ARMSTONG 074 AT&T BROADBAND 074 ATLANTIC BROADBAND 043 074 BELL SOUTH 099 BLUE RIDGE 043 074 BRESNAN 074 BRIGHT HOUSE 043 110 BUCKEYE COMM 074 CABLEVISION 043 074 108 CENTURION 092 CENTURY 007 CHARTER 043 074 CITIZEN 007 COGECO 074 COMBANO 080 081 COMCAST 043 074 110 COMSAT 074 COX DIGITAL 043 074 DIGICABLE 101 EAGLE 020 030 040 EASTERN 057 066 ECHOSTAR 106 ELECTRICORD 032 GEMINI 008 054 GENERAL ELECTRIC 072 GENERAL INSTRUMENT 074 103 104 GNC 099 GOLDEN CHANNEL 030 HAMLIN 049 050 055 HITACHI 103 055 INSIGHT 074 JERROLD 074 004 103 002 003 008 009 010 069 MAGNAVOX 010 012 064 079 095 094 MASSILLON 074 MEDIA ONE 107 MEDICOM 074 MEMOREX 052 MITSUBISHI 102 MOTOROLA 074 110 109 111 MOVIE TIME 028 032 MOXI 111 NCTC 074 NSC 015 028 038 071 OAK 031 037 053 PACE 043 074 PANASONIC 044 047 PARAGON 052 PHILIPS 006 012 013 020 085 095

CABLE / WEBTV

CODE TABLES

CODE TABLES

Page 26 of the Universal Remote Control RF20 user manual — DVD
Page 26 · click to enlarge
Page 26

BRAND CODE NUMBERS CODE NUMBERS BRAND

CABLE / WEBTV

PIONEER 043 103 034 051 063 076 105 PRUCER 059 PULSAR 052 RCA 047 RCN 074 RECOTON 098 REGAL 049 050 REGENCY 057 RODGERS 043 SAMSUNG 030 SCIENTIFIC ATLANTA 043 011 003 041 042 045 046 SEREN 043 SERVICE ELECTRIC 074 SHAW 074 SIGECOM 043 SONY 096 108 SPRUCER 047 078 STARCOM 002 004 008 009 STARGATE 008 030 097 104 SUSQUEHANNA 043 074 TIME WARNER 043 074 TOCOM 039 040 056 TOSHIBA 052 UNITED CABLE 004 053 UNIVERSAL 005 007 014 032 035 VIDEOTRON 043 VIEWSTAR 012 015 018 086 087 088 089 WIDE OPEN WEST 043 099 ZENITH 052 060 093 100

AIWA 146 AKAI 281 ALPINE 098 APEX DIGITAL 087 111 115 112 116 ARCAM 122 CAMBRIDGE AUDIO 215 CARY AUDIO DESIGN 174 CLASSE 167 COBY 258 DENON 007 080 173 FUNAI 143 GATEWAT 175 GE 026 027 GO VIDEO 137 218 220 221 222 HARMAN KARDON 084 140 HITACHI 101 ILO 268 INSIGNIA 143 INTEGRA 142 180 JVC 012 KENWOOD 151 KLH 135 KISS 179 279 KRELL 104 LEXICON 148 LG 091 057 074 LITEON 264 265 MAGNAVOX 066 096 143 MALATA 267 MARANTZ 083 095 MERIDIAN 153 MITSUBISHI 017 MYRYAD 102 134 NAD 088 155 NAKAMICHI 103 ONKYO 076 035 180 OPPO 266 PANASONIC 021 042 138 139 144 150 PHILIPS 066 083 095 105 166 PIONEER 023 092 099 107 108 131 POLAROID 233 234 237 PRIMARE 193 194 PROCEED 086 PROSCAN 026 027 RCA 026 027 RJTECH 269 ROTEL 204 SAMSUNG 056 070 119 165 170 137 159 SANSUI 154 SANYO 147 SENSORY SCIENCE 222 223 SHARP 094 SONY 033 118 145 126 191 SYLVANIA 143

DVD

CODE TABLES

CODE TABLES

Page 27 of the Universal Remote Control RF20 user manual — CODE TABLES
Page 27 · click to enlarge
Page 27

BRAND CODE NUMBERS BRAND CODE NUMBERS

DVD

SYMPHONIC 143 TAG MCLAREN 156 TATUNG 102 TEAC 270 THOMPSON 026 027 THULE 177 TOSHIBA 035 034 130 141 164 188 273 VENTURER 149 VINC 161 YAMAHA 042 089 166 195 197 ZENITH 057 074 091

MAGNAVOX 032 121 MARANTZ 211 MITSUBISHI 121 NAD 121 OPTIMUS 049 013 PANASONIC 113 PHILIPS 032 PIONEER 106 117 121 RADIO SHACK 120 RCA 002 REALISTIC 049 RUNCO 127 SANYO 075 SHARP 152 013 SONY 053 110 TECHNICS 113 THETA DIGITAL 032 TOSHIBA 152 106 YAMAHA 043 129

DVD

DVD-TV/DVD Combos AIWA 146 AKAI 281 FUNAI 143 INSIGNIA 143 SAMSUNG 165 SYLVANIA 143 SYMPHONIC 143 TOSHIBA 130

DVD-TV/DVD/VCR Combos MAGNAVOX 143 PANASONIC 144 SYLVANIA 143 TOSHIBA 164

DVD-DVD/VCR Combos GO VIDEO 137 218 PANASONIC 150 PHILIPS 105 (VCR Functions for VCR 067) POLAROID 234 SAMSUNG 137 159 SANSUI 154 SONY 145 TOSHIBA 141 ZENITH 091 (VCR Functions for VCR171)

CODE TABLES

CODE TABLES

DVD-DVD Recorder GATEWAY 175 GO VIDEO 220 221 222 ILO 268 KISS 279 LITEON 265 PANASONIC 139 SENSORY SCIENCE 222 SONY 191 TOSHIBA 188

DVD-LD DENON 206 207 FUNAI 120 KENWOOD 152 013

Page 28 of the Universal Remote Control RF20 user manual — VCR
Page 28 · click to enlarge
Page 28

BRAND CODE NUMBERS BRAND CODE NUMBERS

VCR

AIWA 034 161 AKAI 016 146 043 046 124 125 142 AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 023 039 043 BROOKSONIC 035 037 129 CANON 028 031 CAPEHART 108 CRAIG 003 040 135 CURTIS MATHES 031 041 DAEWOO 111 116 117 119 005 007 010 065 108 110 112 DAYTRON 108 DBX 012 023 039 043 DYNATECH 034 053 ELECTROHOME 059 EMERSON 006 029 035 017 025 027 031 034 036 037 046 101 129 131 138 153 162 116 FISHER 003 010 008 009 FUNAI 034 GE 031 072 147 063 107 109 144 GO VIDEO 132 136 155 040 115 GOLDSTAR 101 106 114 013 020 012 123 HARMAN KARDON 012 045 HITACHI 004 026 150 018 034 043 063 137 160 013 INSTANTREPLAY 031 JCL 031 JCPENNEY 012 013 015 040 066 101 JENSEN 043 JVC 048 043 130 150 055 060 012 031 050 152 166 KENWOOD 014 048 034 047 LG 101 106 114 013 020 012 123 LLOYD 034 LXI 034 003 009 017 106 MAGIN 040 MAGNAVOX 067 031 034 068 041 156 164 MARANTZ 067 069 012 031 156 MARTA 101 MATSUI 027 030 MEI 031 MEMOREX 101 003 010 014 031 034 053 072 102 134 139 MGA 045 046 059 MINOLTA 013 020 MITSUBISHI 059 061 151 013 020 045 046 051 142 049 168 MTC 034 040 MULTITECH 024 034 NEC 012 023 039 043 048 NORDMENDE 043 OPTONICA 053 054 ORION 025 PANASONIC 066 070 145 083 133 140 157 163 074 167 PENTAX 013 020 031 063 PHILCO 031 034 067 PHILIPS 031 067 034 101 054 071 156 PILOT 101

PIONEER 021 013 048 PORTLAND 108 PULSAR 072 QUARTZ 002 014 QUASAR 066 145 075 RADIO SHACK 123 RCA 107 109 144 147 158 041 145 013 020 140 034 040 REALISTIC 003 008 010 014 031 034 040 053 054 101 RICO 058 RUNCO 148 SALORA 014 SAMSUNG 102 104 113 115 112 120 032 040 066 107 109 122 125 SANSUI 022 043 048 135 SANYO 003 010 007 014 134 102 SCOTT 017 037 112 129 131 SEARS 003 008 010 014 081 013 101 009 017 073 112 SHARP 149 054 031 159 165 SHINTOM 024 SIGNATURE 034 SONY 056 057 058 077 052 003 078 076 031 149 154 SOUNDESIGN 034 STS 013 SYLVANIA 031 034 059 067 SYMPHONIC 034 TANDY 010 034 TATUNG 039 043 TEAC 034 039 043 TECHNICS 031 070 TEKNIKA 031 019 034 101 THOMAS 034 TMK 006 TOSHIBA 112 131 079 008 059 047 082 013 042 081 TOTEVISION 040 101 UNITECH 040 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 034 046 141 VIDEOSONIC 040 WARDS 003 013 017 024 031 034 040 053 054 131 YAMAHA 012 034 039 043 ZENITH 072 080 056 048 101 034 058

VCR

CODE TABLES

CODE TABLES

VCR-TV/VCR Combos DAEWOO 005 117 EMERSON 153 FUNAI 034 GOLDSTAR 101 123 HITACHI 034 JCPENNEY 101 LG 101 123 LLOYD 034 MAGNAVOX 034 067 MEMOREX 101 PANASONIC 070 167

Page 29 of the Universal Remote Control RF20 user manual — AUDIO
Page 29 · click to enlarge
Page 29

BRAND CODE NUMBERS BRAND CODE NUMBERS

VCR

PHILIPS 034 067 RADIO SHACK 123 RCA 034 SEARS 101 SONY 057 154 SYLVANIA 067 SYMPHONIC 034 THOMAS 034 ZENITH 034

ADC 007 ADCOM 082 092 225 161 269 355 356 366 AIWA 170 018 104 202 203 213 211 188 AKAI 138 189 AMC 125 126 127 128 258 281 282 038 AMEND 054 AMX 196 ANGSTROM 142 ANTHEM 335 336 337 338 339 ARCAM 141 418 419 ATLANTIC TECHNOLOGY 342 AUDIO ACCESS 147 AUDIO ALCHEMY 135 AUDIO DESIGN 194 221 011 AUDIO EASE 021 196 207 AUDIO FILE 071 AUDIO MATRIX 167 AUDIO SOURCE 273 AUDIO TECHNICA 134 B & K 096 097 BOSE 070 170 224 347 409 459 460 532 BOSTON ACOUSTICS 447 BRYSTON 023 CAMBRIDGE AUDIO 522 CARVER 006 028 061 071 201 214 226 180 185 022 029 077 284 CASIO 076 CHIRO 140 CINEMA SOUND 034 134 CITATION 148 272 CLARION 026 CLASSE 537 COMPAQ 382 CURTIS MATHES 076 DELPHI 415 515 DENON 002 034 109 215 229 230 027 037 234 259 330 340 341 349 350 400 401 402 444 564 EAD 466 EIGER 149 ELAN 057 290 ENLIGHTENED AUDIO 099 098 ESCIENT 368 381 451 452 453 454 FANFARE 352 FISHER 047 214 180 182 297 FLEXTRONICS 378 FOSGATE 062 231 FOSGATE AUDIONICS 342 GE 056 260 GOLDSTAR 008 HAFLER 174 HARMAN KARDON 231 233 254 153 154 118 121 227 277 317 318 365 HITACHI 020 IMERGE 371 INKEL 197 INSIGNIA 589

AUDIO

CODE TABLES

CODE TABLES

Page 30 of the Universal Remote Control RF20 user manual — CODE TABLES
Page 30 · click to enlarge
Page 30

BRAND CODE NUMBERS BRAND CODE NUMBERS

AUDIO

INTEGRA 354 438 JAMO 398 JBL 263 JCPENNEY 076 216 JEFF ROWLAND 206 JENSEN 058 JVC 240 163 191 114 266 279 291 KENWOOD 026 066 145 146 181 190 197 192 182 199 151 222 180 005 280 374 550 KINERGETICS 220 140 KLH 331 KOSS 216 573 KRELL 150 072 376 384 KYOCERA 007 LEXICON 120 235 236 237 357 358 359 360 361 362 363 364 LINN 124 377 LUXMAN 137 139 052 165 115 004 009 LXI 076 056 MAGNAVOX 086 164 152 208 MARANTZ 006 028 031 040 063 185 186 251 265 119 289 296 492 MCINTOSH 238 286 MCS 076 MERIDIAN 100 012 013 MITSUBISHI 242 243 204 MONDIAL 157 158 042 043 081 112 MYRYAD 276 293 NAD 186 113 283 478 479 NAKAMICHI 111 244 245 172 183 287 NEC 176 NIRO 343 NILES 403 ONKYO 017 046 064 107 108 187 079 080 090 179 209 270 275 438 OPTIMUS 026 041 138 OUTLAW 342 PANASONIC 032 195 219 177 292 383 516 PARASOUND 129 130 132 261 294 295 333 334 PHAST 196 PHILIPS 249 250 251 063 119 PIONEER 014 033 039 044 045 050 069 159 168 116 035 078 198 480 POLKAUDIO 029 515 PRIMARE 464 PROCEED 144 268 RCA 010 048 117 156 067 288 REALISTIC 019 056 073 075 095 REQUEST 351 REVOX 162 ROTEL 074 083 085 RUSSOUND 379 391 392 SAMSUNG 016 571 SANSUI 040 048 110 119 065 228 SANYO 047 059 SCOTT 019 091 SEARS 076 SHARP 026 094 131 175 181

SHERWOOD 024 038 055 102 103 105 106 051 030 447 SIRIUS 585 SONY 018 093 223 247 248 160 166 015 101 184 218 271 353 369 372 380 417 421 SOUNDESIGN 036 SOUNDMATTERS 375 SOUNDSTREAM 084 088 SSI 068 SUMO 171 SUNFIRE 344 345 346 494 TAEKWANG 138 TEAC 005 019 049 111 212 217 TECHNICS 122 176 193 219 178 177 200 257 262 THETA DIGITAL 136 TOSHIBA 060 087 198 278 WARDS 180 XM SATELLITE RADIO 415 515 YAMAHA 026 253 169 067 173 205 264 232 089 264 274 285 332 373 432 433 ZENITH 143 210

AUDIO

AUDIO-XM Radios & Tuners BOSE 170 532 DELPHI 415 515 FANFARE 352 KENWOOD 550 POLKAUDIO 515 SIRIUS 585 SONY 380 XM SATELLITE RADIO 415 515

CODE TABLES

CODE TABLES

Page 31 of the Universal Remote Control RF20 user manual — CD
Page 31 · click to enlarge
Page 31

BRAND CODE NUMBERS BRAND CODE NUMBERS

SAT

CABLEVISION / VOOM 148 DIRECTV 173 ECHOSTAR / DISH 122 167 168 EXPRESSVU 122 GENERAL ELECTRIC 151 106 150 GENERAL INSTRUMENT 148 GOI 122 HITACHI 139 140 HTS 122 HUGHES 161 162 068 154 165 166 108 117 JVC 122 LG 170 MAGNAVOX 136 MEMOREX 136 MITSUBISHI 068 154 MOTOROLA 148 NEXT LEVEL 148 PANASONIC 142 160 PANSAT 172 PAYSAT 136 PHILIPS 152 153 156 068 154 136 108 117 PROSCAN 151 106 150 RADIOSHACK 148 RCA 151 106 150 SAMSUNG 123 155 163 169 175 SKY 164 SONY 103 STAR CHOICE 148 TOSHIBA 127 068 154 157 158 UNIDEN 136 ZENITH 159

ADCOM 062 042 AIWA 059 065 088 089 105 122 170 187 AKAI 085 195 202 AMC 231 232 AMEND 118 ARCAM 238 AUDIO ACCESS 119 147 AUDIO EASE 165 AUDIO TECHNICA 046 BSR 037 057 CALIFORNIA AUDIO 103 008 CAPETRONIC 063 CARRERA 057 080 CARVER 185 041 044 050 086 107 130 134 135 138 139 203 204 167 CASIO 111 182 CLARINETTE 182 CREEK 159 CROWN 035 DENON 002 123 EMERSON 042 069 102 FISHER 050 185 134 008 FRABA 111 GENEXXA 010 069 102 GOLDSTAR 080 HAITAI 093 HARMAN KARDON 018 033 047 208 HITACHI 042 175 INKEL 130 143 144 JCPENNEY 014 061 092 141 JENSEN 158 JVC 004 022 136 163 213 214 242 243 KENWOOD 185 007 023 055 071 072 142 137 254 KOSS 061 KRELL 241 KYOCERA 005 LOTTE 102 LUXMAN 011 028 070 076 249 252 LXI 059 MAGNAVOX 044 107 MARANTZ 027 041 044 051 077 107 209 246 MCINTOSH 212 247 MCS 014 073 092 MEMOREX 010 MISSION 044 107 MITSUBISHI 179 MITSUMI 153 MODULAIRE 182 MONDIAL 147 MYRYAD 244 155 NAD 006 005 067 178 NAKAMICHI 217 218 219 095 NEC 014 062 NIKKO 046 NSM 044 107

CD

CODE TABLES

CODE TABLES

Page 32 of the Universal Remote Control RF20 user manual — DVR
Page 32 · click to enlarge
Page 32

BRAND CODE NUMBERS BRAND CODE NUMBERS

CD

ONKYO 030 038 039 168 169 OPTIMUS 010 050 057 058 081 082 083 085 093 195 PANASONIC 103 201 172 008 068 248 PARASOUND 233 240 PHILIPS 041 044 107 246 253 PIONEER 010 020 025 056 174 175 176 PROCEED 239 PROTON 044 107 228 QUASAR 103 008 RADIO SHACK 182 RCA 017 042 150 REALISTIC 042 050 051 102 181 182 187 ROTEL 044 107 161 178 250 SAE 044 107 SANSUI 044 069 107 128 171 190 125 SANYO 050 SCOTT 069 102 SHARP 026 031 051 066 SHERWOOD 003 019 051 096 112 115 119 166 SIGNATURE 033 SONY 048 081 097 126 133 177 225 226 164 SOUNDESIGN 251 SUMO 155 SYLVANIA 044 107 SYMPHONIC 052 181 TAEKWANG 195 085 TANDY 010 TEAC 015 034 036 051 052 101 131 140 079 TECHNICS 060 103 200 172 184 008 068 TECHWOOD 076 THETA DIGITAL 234 235 TOSHIBA 006 067 091 160 148 VECTOR RESEARCH 080 VICTOR 004 022 114 124 WARDS 185 033 YAMAHA 024 046 054 186 183 245 YORX 182

DISH 122 ECHOSTAR 122 HUGHES 108 117 HUMAX 117 JVC 122 PHILIPS 108 090 117 RCA 109 REPLAY NETWORKS 075 SONY 104 105 TIVO 090 117 TOSHIBA 117

DVR

CODE TABLES

CODE TABLES

Page 33 of the Universal Remote Control RF20 user manual — CODE TABLES
Page 33 · click to enlarge
Page 33

BRAND CODE NUMBERS BRAND CODE NUMBERS

AUX

3M 152 AIWA 164 APPLE/iPod 412 401 ARCHER 155 AURORA MULTIMEDIA 220 AUTON 191 BOSE 409 CELADON 221 CRESTRON 213 214 215 216 217 218 DELL 261 262 DMX 156 DRAPER SCREEN 204 DREAMVISION 097 DWIN 080 253 EVERQUEST 206 EXTRON 151 FAROUDJA 184 FUJI 209 GATEWAY 261 262 HAUPPAUGE 294 295 HP 261 262 HUNTERDOUGLAS 219 JERROLD 153 JVC 185 KENWOOD 185 KENSINGTON 406 KEYSPAN 297 LITE-TOUCH 208 257 LUTRON 158 159 077 MAKITA 186 201 MICROSOFT/XBOX 408 107 MINDPATH 205 NILES 160 187 NSM 161 PIANO DISC PLUS 085 POLKAUDIO 162 RUSSOUND 081 SCIENTIFIC ATLANTA 163 156 SIMA 082 SOLO ELECTRONICS 207 SOMFY 078 079 SONY 164 165 166 261 262 STARCOM 153 TURBOSCAN 167 VELODYNE 203 X-10 183 093 XANTECH 168 169 170 171 172 188 189

HARMAN KARDON 233 JVC 106 116 239 240 KENWOOD 005 013 023 026 064 145 146 181 190 LINN 124 LUXMAN 035 137 139 MAGNAVOX 027 MARANTZ 014 027 056 065 087 MCINTOSH 238 MITSUBISHI 242 243 NAD 029 048 NAKAMICHI 244 245 025 ONKYO 002 012 016 017 018 019 115 OPTIMUS 026 054 055 PANASONIC 007 010 032 088 195 PHILIPS 027 087 PIONEER 003 039 047 050 066 098 222 QUASAR 007 088 SANSUI 027 113 119 224 SHARP 026 057 131 175 181 SHERWOOD 038 004 028 030 033 034 SONY 020 022 052 084 089 TEAC 009 059 212 TECHNICS 007 010 076 088 109 122 193 TOSHIBA 112 VICTOR 106 YAMAHA 021 026 031 067 040

AUX

AUX-Media PC Controls DELL 261 262 GATEWAY 261 262 HAUPPAUGE 294 295 HP 261 262 KEYSPAN 297 SONY 261 262 TOSHIBA 261 262 WINBOOK 261 262

CODE TABLES

CODE TABLES

AUX - Gaming System Controls MICROSOFT/XBOX 408 107 SONY/PS2 414

AUX-iPod Controls APPLE/iPod 412 401 BOSE 409 KENSINGTON 406

AUX-TAPE AIWA 015 071 100 114 CARVER 006 008 027 024 036 DENON 105 227 229 FISHER 064 GOLDSTAR 011

Page 34 of the Universal Remote Control RF20 user manual — OTHER INFO
Page 34 · click to enlarge
Page 34

Frequently Asked Questions

Frequently Asked Questions

Warranty

Warranty/ Specifications

What is a “macro” button? A “macro” is a button on the RF20 that you setup to make a lot of things happen when you press it. For example, to watch a DVD in most home theaters requires several remote controls and many button presses (power up the TV, power up the surround sound, power up the DVD player, set the TV to the correct video input, set the surround sound to the correct audio input and finally; press play on the DVD player remote control).

Universal Remote Control’s MastercontrolTM RF20 is covered against any manufacturers defects or workmanship for a period of one year from the date of purchase if purchased from an authorized Universal Remote Control dealer. Units purchased from online auction sites or other unauthorized resellers have no warranty. This warranty does not cover the following items:

- Damage from misuse, neglect, or acts of nature

Instead of pressing all of those buttons one at a time, the RF20 enables you to setup one button that does all those steps automatically with one press. For more information on how and why you should setup macro buttons, watch the Quick Setup DVD Program Guide or refer to pages 26-29 in this Manual.

- Products that have been modified or incorporated into other products

- Products purchased more than 12 months ago

- Units purchased from unauthorized dealers or companies

If the batteries run out, will I lose my settings? No. The RF20 stores all of your settings in non-volatile FLASH memory. You could remove the batteries for months, replace them at your convenience, and the RF20 would still remember your settings.

Specifications

Learning Capability - 825 IR commands at standard frequencies (15kHz to 100kHz) Macro Capability - 453 Macros of up to 190 steps each IR Range (Line of Sight via Infrared): 30-50 feet, depending on the environment RF Range (radio frequency): 50 to 100 feet, depending upon the environment RF Frequency: 418MHz Weight: 7.1 oz. (with batteries) Size: 8.5” x 2.5” x 1” Batteries: Four AAA Alkaline batteries included LCD Size: 0.88” x 1.88”

Who can I call for more answers? The Universal Remote Control Technical Support and Customer Service staff are ready to answer any questions you might have.

Call us at 1-914-835-4484 Monday - Friday, 9AM to 6PM (EST)

OTHER INFO

OTHER INFO

Page 35 of the Universal Remote Control RF20 user manual — Warning
Page 35 · click to enlarge
Page 35

OTHER INFO Information To The User/Warning

Information To The User

NOTE OTHER INFO

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Warning

Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.

Page 36 of the Universal Remote Control RF20 user manual — simply MORE powerful RF20
Page 36 · click to enlarge
Page 36

simply MORE powerful RF20

Control Remoto Universal

™ MANUAL DEL PROPIETARIO

simply MORE powerful RF20

500 Mamaroneck Avenue Harrison, NY 10528 Phone: 1-914-835-4484 FAX: 1-914-835-4532

www.universalremote.com

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Universal Remote Control RF20

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Universal Remote Control RF20

Be the first to ask — other owners or our team will answer.

Original document

Universal Remote Control RF20 manual PDF

61 pages·4.1 MB·Universal Remote·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…