EN
Universal Remote Control logo
Official user manual

Universal Remote Control WR7

52 pages·1.2 MB·Universal Remote·PDF·ENDEFRITNLJA
Universal Remote Control WR7
Table of Contents 80 sections Congratulations! · WR7 Owner’s Manual · 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 · Table of Contents · … ShowHide
Congratulations!p.2WR7 Owner’s Manualp.2500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532p.2Table of Contentsp.3Getting Started - Overviewp.3Special Advanced Featuresp.3Macros ....................................7p.3Channels..................................7p.3“ Punch Throughs ” ......................7p.3Keypad Layout & Buttonp.3Functions ........................8p.3Programming WR7 Usingp.3Pre-Programmed Codes.....9p.3Method .............................11-13p.3the Learning Method ..16-18p.3AUX Function: Programmingp.3a 7th Component............19p.3Finding a Component’sp.3Set-Up Code Number ..19-20p.3Pre-Programmed Code Tables ..........................35p.4FAQs ............................44p.4Warranty ......................45p.4Specifications ................45p.4Getting Started -p.5Overviewp.5Control up to 7 Componentsp.5Activating Component Buttonsp.5TV BUTTONp.5Learning Capabilityp.5AUX Functionp.6Light Buttonp.6Battery Installationp.6INSERT BATTERIESp.6CORRECTLYp.6Low Battery Warningp.6Couch Modep.6Special Advancedp.7Featuresp.7MacroPower ™ & Other Macro Buttonsp.7“ My Favorites ” (Favorite Channels)p.7SimpleSound ™ & Other “ Punch Throughs ”p.7Keypad Layout &p.8Button Functionsp.8ONp.8SYSTEM OFFp.8AUD, CD, VCR, AUX, TV, DVD,SAT/CABLEp.8FAVORITEp.8INPUTp.8CHANNELp.8PREVIOUSp.8MUTEp.8VOLUMEp.8INFOp.8GUIDEp.8MENUp.8EXITp.8SELECTp.8CURSOR NAVI-p.8GATION PADp.8SKIP-/+p.8TRANSPORTp.8CONTROLSp.8NUMBERp.8PADp.8MY FAVORITESp.8Pre-Programmed Codesp.9* * *p.9Quick Set-Up Methodp.9COMPONENTp.10BUTTONSp.10Three-Digit Code Entry Methodp.11SELECT BUTTONp.11NUMBER BUTTONSp.12Auto-Search Methodp.14UP ARROWp.14DOWN p.14ARROWp.14PLEASE DO NOT RETURN THIS PRODUCT TO THE STOREp.15PLEASE CONTACT OUR TECHNICALp.15IF YOU NEED ASSISTANCE E-MAILp.15
Page 1 of the Universal Remote Control WR7 user manual
Page 1 · click to enlarge
Page 1
Universal Remote Control WR7 diagram (page 1)
Fig. 1
Page 2 of the Universal Remote Control WR7 user manual — 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
Page 2 · click to enlarge
Page 2

Congratulations!

Congratulations on purchasing Universal Remote Control’s WR7 7-Component Pre--Programmed and Learning remote control. You now have the power to control your entire home entertainment system with one easy--to--use remote. The WR7can be used with thousands of audio/video compo- nents because of the extensive library of codes that have already been programmed into the remote. So... get ready to sit back, relax, and simplify your home entertainment experience.

This Owner’s Manual is designed to assist you in programming your WR7 remote to work with your components by guiding you through an easy step- by-step process. Everything you need to know about programming the WR7 is contained in this Manual.

© 2008 Universal Remote Control, Inc.

WR7 Owner’s Manual

This document is protected by the copyright laws of the United States and internationally by the Berne Convention. No part of this manual may be reproduced in any form without the express written consent of Universal Remote Control, Inc. Although reasonable care has been taken to assure the accuracy of the information herein contained, Universal Remote Control, Inc. is not responsible for operational, technical or editorial errors or omissions. The specifications and information in this manual may be subject to change without notice. MacroPower™ and SimpleSound™ are trademarks of Universal Remote Control, Inc. Entertainment Made Simple

® is a registered trade- mark of Universal Remote Control, Inc. All other brand or product names are trademarks or regis- tered trademarks of their respective owners.

The Pioneer in Control Technology

500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532

Page 3 of the Universal Remote Control WR7 user manual — Table of Contents
Page 3 · Contents
Contents

Contents

Congratulations!p.2WR7 Owner’s Manualp.2500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532p.2Table of Contentsp.3Getting Started - Overviewp.3Special Advanced Featuresp.3Macros ....................................7p.3Channels..................................7p.3“ Punch Throughs ” ......................7p.3Keypad Layout & Buttonp.3Functions ........................8p.3Programming WR7 Usingp.3Pre-Programmed Codes.....9p.3Method .............................11-13p.3the Learning Method ..16-18p.3AUX Function: Programmingp.3a 7th Component............19p.3Finding a Component’sp.3Set-Up Code Number ..19-20p.3Pre-Programmed Code Tables ..........................35p.4FAQs ............................44p.4Warranty ......................45p.4Specifications ................45p.4Getting Started -p.5Overviewp.5Control up to 7 Componentsp.5Activating Component Buttonsp.5TV BUTTONp.5Learning Capabilityp.5AUX Functionp.6Light Buttonp.6Battery Installationp.6INSERT BATTERIESp.6CORRECTLYp.6Low Battery Warningp.6Couch Modep.6Special Advancedp.7Featuresp.7MacroPower ™ & Other Macro Buttonsp.7“ My Favorites ” (Favorite Channels)p.7SimpleSound ™ & Other “ Punch Throughs ”p.7Keypad Layout &p.8Button Functionsp.8ONp.8SYSTEM OFFp.8AUD, CD, VCR, AUX, TV, DVD,SAT/CABLEp.8FAVORITEp.8INPUTp.8CHANNELp.8PREVIOUSp.8MUTEp.8VOLUMEp.8INFOp.8GUIDEp.8MENUp.8EXITp.8SELECTp.8CURSOR NAVI-p.8GATION PADp.8SKIP-/+p.8TRANSPORTp.8CONTROLSp.8NUMBERp.8PADp.8MY FAVORITESp.8Pre-Programmed Codesp.9* * *p.9Quick Set-Up Methodp.9COMPONENTp.10BUTTONSp.10Three-Digit Code Entry Methodp.11SELECT BUTTONp.11NUMBER BUTTONSp.12Auto-Search Methodp.14UP ARROWp.14DOWN p.14ARROWp.14PLEASE DO NOT RETURN THIS PRODUCT TO THE STOREp.15PLEASE CONTACT OUR TECHNICALp.15IF YOU NEED ASSISTANCE E-MAILp.15
Page 4 of the Universal Remote Control WR7 user manual — FAQs ............................44
Page 4 · click to enlarge
Page 4
  • Programming Special Advanced Features
  • MacroPower ™ Total System On/Off ..............................21-22
  • “ My Favorites ” – Favorite Channels............................23-24
  • SimpleSound ™ Total System Volume Control....................25-26
  • Channel Control “ Punch Through ” .......................27
  • Transport Control “ Punch Through ” .......................28
  • OSD (On-Screen Display) Control “ Punch Through ” ............29
  • Erasing Commands - Overview......................30
  • Erasing a Single Learned Command ...............................30
  • Erasing All Learned Commands from One Component...............31
  • Erasing MacroPower & Other Macro Commands ...................32
  • Erasing SimpleSound & Other “ Punch Through ” Commands......33
  • Factory Reset ...........................34

Pre-Programmed Code Tables 35

  • AUDIO ..................................36
  • CD ........................................37
  • VCR/DVR...............................38
  • AUX ......................................39
  • TV ....................................40-41
  • DVD ......................................42
  • CABLE/SAT ............................43

FAQs 44

Warranty ......................45

Specifications ................45

Page 5 of the Universal Remote Control WR7 user manual — TV BUTTON
Page 5 · click to enlarge
Page 5

Getting Started -

Overview

Control up to 7 Components

The WR7 remote control is designed to control up to seven different Audio/Video components and operate virtually all brands of AUDIO, TV, DVD, VCR/DVR, CD, SAT/CABLE and AUX (Light, Music Server, etc.) components.

Activating Component Buttons

Once you have programmed the WR7 for all of your components, all you need to do is press a component button and all the buttons on the WR7 will work with that component. For example, when you press the TV component button, all the buttons on your WR7 will operate your TV. If you press the DVD component but- ton, all the buttons on the WR7 will oper- ate your DVD.

Each time you press any of the buttons on the remote, the LED light in the com- ponent button will light up to indicate which component you are controlling.

Universal Remote Control WR7 — Activating Component Buttons diagram (page 5)
Fig. 2 · Activating Component Buttons

TV BUTTON

Learning Capability

The WR7 has the ability to “learn” functions from the original remote controls of other manufacturers, even if they are not in the Pre-programmed database.

Page 6 of the Universal Remote Control WR7 user manual — Couch Mode
Page 6 · click to enlarge
Page 6

AUX Function

The AUX (Auxillary) button is designed to operate a 7th audio/video component that you may have in your system… such as a TIVO, a second VCR or DVD, or an addi- tional audio component.

Light Button

The WR7 features a fully backlit keypad for ease of use in low light or darkened viewing conditions. Press the LIGHT button to back- light all the keypad buttons. Press again to turn off (or simply wait 10 seconds for auto- matic shut-off).

Battery Installation

Press the tab and remove the cover of the battery compartment located in the back of your remote. Insert the two AA Alkaline bat- teries (included in the package) making sure to match the positive (+) and negative (- ) symbols as shown in the diagram. Place the cover back over the battery compartment.

Universal Remote Control WR7 — Battery Installation diagram (page 6)
Fig. 3 · Battery Installation

INSERT BATTERIES

CORRECTLY

Low Battery Warning

When the batteries are low and need to be replaced the component LED will quickly blink three times when you press the POWER [ON] button.

Couch Mode

The WR7 is designed to automatically turn itself off if a button is pressed for more than 30 seconds. This prevents battery power from being depleted should the remote acci- dentally slip between the couch cushions.

Page 7 of the Universal Remote Control WR7 user manual — SimpleSound ™ & Other “ Punch Throughs ”
Page 7 · click to enlarge
Page 7

Special Advanced

Features

The WR7 also offers the following special advanced features that can offer you many time-saving conveniences:

MacroPower ™ & Other Macro Buttons

MacroPower is a unique feature that enables you to turn all your components ON or OFF, all at the same time, simply with the press of one button. The WR7 has 13 Macro buttons that are designed to store up to 20 commands in each button. Pressing any one of the Macro buttons will send out the series of commands that are stored in that button.

“ My Favorites ” (Favorite Channels)

This is one of the most desirable features of the WR7 remote control. Once it’s set up, you can select one of four favorite channels with the press of one button – without the need to type in a channel number. So, whether it’s CNN or the Food Network, your favorite viewing spot is just one click away.

SimpleSound ™ & Other “ Punch Throughs ”

SimpleSound Volume Control is a dynamic fea- ture that gives you total volume control over all the components in your system, even those that do not have their own built--in volume control, such as TIVO, DVD and VCR... saving you the hassle and inconvenience of constantly needing to switch between component modes on the remote. As an example, in order to increase the volume while watching a DVD, you would typi- cally have to pick up the TV remote control to increase the volume. With the WR7, you do not even have to press the TV component but- ton. Once you program SimpleSound in your DVD mode, you will automatically have TV vol- ume control in DVD mode.

SimpleSound is what is called a “Punch Through” feature and is not limited to volume control. It can also be applied to Channel Control, Transport Control, and OSD Control.

Page 8 of the Universal Remote Control WR7 user manual — LIGHT BUTTON
Page 8 · click to enlarge
Page 8

Keypad Layout &

Button Functions

ON

SYSTEM OFF

Allows you to turn the selected component on and off.

Designed to send Power On/Off commands for up to seven com- ponents with one button press.

AUD, CD, VCR, AUX, TV, DVD,SAT/CABLE

FAVORITE

Used to select the com- ponent you want to operate and signals remote control activity.

Universal Remote Control WR7 — AUD, CD, VCR, AUX, TV, DVD,SAT/CABLE diagram (page 8)
Fig. 4

Designed to send Power On/Off commands for up to seven com- ponents with one button press.

INPUT

Selects the video source from avail- able components.

CHANNEL

PREVIOUS

Selects the next higher or lower channel.

CHANNEL

Returns to the previous- ly tuned channel through the SAT/Cable Set Top Box.

MUTE

Silences the Audio. Press to activate. Press again to restore sound to the previous level.

VOLUME

Raises or lowers the sound volume.

INFO

GUIDE

Displays information about the program currently playing or highlighted in the Program Guide (see GUIDE).

Displays the Program Guide Listings provided by the Cable or Satellite Service Provider.

MENU

EXIT

Displays the Applications Menu through the Cable Set Top Box.

Exits from current screen.

SELECT

CURSOR NAVI-

Selects highlighted screen options.

GATION PAD

Used for program- ming steps and on- screen navigation and highlighting.

SKIP-/+

Skip forward or backward a whole day in the Program Guide.

TRANSPORT

CONTROLS

Perform standard VCR and DVD func- tions when in VCR and DVD mode, or VOD (Video-On- Demand) and DVR (Digital Video Recorder) functions when in Cable mode.

NUMBER

PAD

Use to enter code num- bers for programming components and to enter channel numbers to tune in channels. Also used to make numeric entries on on-screen menus. The alpha labels on the keys refer to Audio component functions that can be accessed with the respective keys.

MY FAVORITES

Custom-programmable Favorite Channel Buttons

LIGHT BUTTON

Press to back-light all keypad buttons. Press again to shut off (or simply wait 10

seconds for automatic shut-off).

Page 9 of the Universal Remote Control WR7 user manual — * * *
Page 9 · click to enlarge
Page 9

Programming WR7 using

Pre-Programmed Codes

There are three ways you can program your WR7 using the component brand codes that are pre-programmed into the remote.

  • Quick Set-Up Method
  • Three-Digit Code Entry Method
  • Auto--Search Method

The Quick Set-Up Method is a unique new fea- ture that enables the fastest and easiest set-up by using one-digit codes for up to 10 major brands for each component. The Three-digit Code Entry Method allows you to set-up the WR7 using 3-digit codes for component brand names. It is also a fast and easy way to pro- gram the remote. The Auto-Search Method scans through all the brands in the remote con- trol, one at a time. It should be used when either the Quick Set-Up or Three-Digit Code Entry Methods do not work.

* * *

Quick Set-Up Method

1. Manually or using your old remote, turn on the component you want to program—for example, to program your TV, turn on your TV set.
2. Point the WR7 toward the component that you want to program (in this case the TV set) and press and hold the component button (in this case the TV button). While holding down the component button , begin to press numeric keys, one number at a time, starting from 1, continuing to 2, 3…0 until the component (in this case the TV) turns off.
Page 10 of the Universal Remote Control WR7 user manual — NUMBER
Page 10 · click to enlarge
Page 10
3. Release the component button to save the code. The component LED light will blink three times to confirm that the code has been stored.

Repeat the above steps for other components.

COMPONENT

BUTTONS

Universal Remote Control WR7 — COMPONENT diagram (page 10)
Fig. 5

NUMBER

PAD

Page 11 of the Universal Remote Control WR7 user manual — COMPONENT
Page 11 · click to enlarge
Page 11

Three-Digit Code Entry Method

1. Find the 3-digit code numbers assigned to your brand from the lists in the back of this manual. The codes are listed by component category (i.e., TV, VCR, DVD, etc.), then by brand name. For instance, if you would like to locate a code for a Sony television, first locate the TV category and then look for the Sony brand.
2. Once you have located the 3digit codes for each of the components that you wish to operate with your WR7, write them ALL down on a piece of paper. It’s important that you write down all the codes listed for your brand because only one code is going to work with your component.
3. Manually or using your old remote, turn on the component you want to program—for example, to program your TV turn on your TV set.
4. On the WR7, press the Component button that you want to program (in this case the button that says TV) and the SELECT [SEL] button at the same time. Hold down both buttons for two seconds until the TV Component LED light turns on. This signals that you are in programming mode.
Universal Remote Control WR7 — Three-Digit Code Entry Method diagram (page 11)
Fig. 6 · Three-Digit Code Entry Method

COMPONENT

BUTTONS

SELECT BUTTON

Page 12 of the Universal Remote Control WR7 user manual — NUMBER BUTTONS
Page 12 · click to enlarge
Page 12
5. Point the WR7 toward the component (in this example the TV) and punch in the first 3-digit code that you wrote down for that specific component. Use the Number buttons 0~9 on the remote to punch in the code. The TV LED light will blink each time a number is pressed.
Universal Remote Control WR7 — NUMBER BUTTONS diagram (page 12)
Fig. 7

NUMBER BUTTONS

If the 3-digit code number you just punched in is the correct number, the component you are trying to program will turn off. If it did not turn off, enter the next code number from your list until it does turn off.

6. Once you’ve entered the code number and the component has turned off, press the POWER [ON] button on the WR7 remote to turn the component back on.

Next test the VOLUME and CHANNEL but- tons (or PLAY and STOP buttons for VCR and DVD) to make sure they all work. For exam- ple, perhaps your Sony TV turned off with code number 147, but the volume controls did not work properly. In this case, try the next code number listed for that component. Repeat Step 5 using the next code number until you find a perfect match.

Page 13 of the Universal Remote Control WR7 user manual — NUMBER BUTTONS
Page 13 · click to enlarge
Page 13
7. Once you’ve entered a correct code, you must save it. Press the component button you just programmed (in this case TV) one more time to save the code number. The component LED light will blink three times to confirm that the code was successfully stored. Now when you press the TV component button, all of the buttons will work with your TV.

Program the remaining components by repeating steps 3 through 7.

Page 14 of the Universal Remote Control WR7 user manual — DOWN
Page 14 · click to enlarge
Page 14

Auto-Search Method

The Auto-Search Method is a way you can scan through all of the codes in the table to find the right code for your component.

1. Manually or using your old remote, turn on the component you want to program—for example, to program your TV, turn on your TV set.
2. On the WR7, press the Component button that you want to program (in this case the button that says TV) and the SELECT [SEL] button at the same time. Hold down both buttons for two seconds until the TV Component button light turns on. This signals that you are in programming mode.

UP ARROW

Universal Remote Control WR7 — UP  ARROW diagram (page 14)
Fig. 8

DOWN

ARROW

Page 15 of the Universal Remote Control WR7 user manual — (9:00AM - 6:00PM EST)
Page 15 · click to enlarge
Page 15
3. Point the WR7 remote control toward the component and press the UP [ ] arrow (or DOWN [ ] arrow) button once. Each time the UP or DOWN arrow button is pressed, the code will count up (or down) one code number and send a Power OFF signal. When the correct code is sent out, the component will turn off.
4. Once you have found the right code number and the component has turned off, press the POWER [ON] button on the WR7 remote to turn the component back on.

Next test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for VCR and DVD) to make sure they all work. If any of the buttons do not work properly, you need to find a new code. Continue pressing the UP (or DOWN) arrow button until you find a new code that turns off the component and makes the VOL- UME or PLAY buttons respond correctly.

5. Once you have found the right code, you must save it. Press the component button you just programmed (in this case TV) one more time to save the code number. The component LED light will blink three times to confirm that the code was successfully stored. Now when you press the TV component button, all of the buttons will work with your TV.

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE

PLEASE CONTACT OUR TECHNICAL

SUPPORT CENTER.

IF YOU NEED ASSISTANCE E-MAIL

techsupport@UniversalRemote.com

or dial 1-800-901-0800

(9:00AM - 6:00PM EST)

Page 16 of the Universal Remote Control WR7 user manual — Programming WR7 using
Page 16 · click to enlarge
Page 16

Programming WR7 using

the Learning Method

1. Line up the WR7 to the remote control you want to “ learn ” from, head--to--head as shown below. Start with both remotes’ IR windows touching (or nearly touching).
Universal Remote Control WR7 — Programming WR7 using diagram (page 16)
Fig. 9 · Programming WR7 using
Universal Remote Control WR7 — Programming WR7 using diagram (page 16)
Fig. 10 · Programming WR7 using
2. On the WR7, press the Component button that you want to program (in this case the button that says TV) and the ENTER [ENT] button at the same time. Hold down both buttons for two seconds until the TV Component button light turns on. This signals that you are in programming mode.
3. Press any button on the WR7 that you want to teach a command to. For example, if you want to teach the [MUTE] button on the WR7 the TV Mute command from the other remote, first press the [MUTE] button on the WR7 and the TV component button LED light will blink once indicating that the WR7 is ready to learn the command.
Page 17 of the Universal Remote Control WR7 user manual — If the Learning Method does not work, here are a few suggestions:
Page 17 · click to enlarge
Page 17
4. Press and hold the [MUTE] button on the other remote until the component button LED on the WR7 blinks twice. Now you can continue learning all other buttons from your old remote by pressing the next button on the WR7 and repeating this step.
5. Once the WR7 has learned all the buttons in the selected component mode, press and hold the Component button and ENTER [ENT] buttons at the same time to save the learned functions. The component LED light will blink three times to confirm the programming. Now test all the buttons to make sure they learned correctly.

Repeat Steps 1-5 to program any other com- ponent modes.

If the Learning Method does not work, here are a few suggestions:

  • If you have a Plasma TV, move to another room
  • Avoid programming under fluorescent light or direct sunlight
  • Put new batteries in the old remote
  • Gradually vary the distance between the two remote controls
  • Adjust the angles of the remotes (i.e., keep the WR7 on a flat surface while holding the other remote in hand and angling it down toward the WR7)
  • Tap the button on your old remote instead of pressing and holding it during the learning process
Page 18 of the Universal Remote Control WR7 user manual — Here are some additional facts regarding the Learning process:
Page 18 · click to enlarge
Page 18

Here are some additional facts regarding the Learning process:

  • Learned functions override any existing preprogrammed functions on the remote control
  • Learned functions are automatically erased when a new function is learned on the same button
  • Learned functions are retained even after a different set-up code number is programmed into the remote control
  • To return to an original pre-programmed function, a learned function must be erased
  • Rapidly tapping the Volume Up button on the old remote will teach the WR7 to ramp the volume instead of raising it in increments of one
Page 19 of the Universal Remote Control WR7 user manual — INFO
Page 19 · click to enlarge
Page 19

AUX Function: Programming

a 7th Component

After you’ve finished programming the WR7 for six primary components and you did not use AUX, you can take advantage of the AUX function to program a 7th component, such as a second TV, DVD, or any other audio/video component that you may have in your system. Simply program the [AUX] but- ton in the same manner as any other component using either the Quick Set-Up Method, the 3-Digit Code Entry Method, the Auto-Search Method or the Learning Method.

Finding a Component’s

Set-up Code Number

If you used the Auto--Search or Learning Methods to program a component, you may not know the code number you programmed. Here is a way for you to identify what that code number is, so you can make a note in the back of this Manual for future reference.

1. Press the component button you would like to verify and the SELECT [SEL] button at the same time for two seconds until the selected component LED light turns on.

COMPONENT

BUTTONS

Universal Remote Control WR7 — COMPONENT diagram (page 19)
Fig. 11

INFO

SELECT

Page 20 of the Universal Remote Control WR7 user manual — PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
Page 20 · click to enlarge
Page 20
2. Press the [INFO] button and count the number of times the Component LED light blinks. This number indicates the first digit of the code. Next it will pause for about one second and begin blinking again to indicate the number of the second digit. Then once again it will pause, then blink, to indicate the number of the third digit.

Example: One blink, pause, eight blinks, pause, three blinks indicates code number 183.

Page 21 of the Universal Remote Control WR7 user manual — POWER
Page 21 · click to enlarge
Page 21

Programming Special

Advanced Features

Programming Multi-Commands to Macro Buttons

The WR7 has 13 Macro buttons (ON, SYS- TEM OFF, 7 Component buttons, and 4 “My Favorites” buttons) that are designed to store up to 20 commands in each button. Pressing any one of the Macro buttons will send out the series of commands that are stored in that particular button.

MacroPower ™ Total System On/Off

MacroPower makes several devices work togeth- er by pressing one button. Imagine the conven- ience of turning on your TV, your DVD player and your Surround Sound receiver by pressing a single button on your WR7. What could nor- mally take three remotes and three button push- es, the WR7 can accomplish with the press of one button. We call that MacroPower. Any of the Power On or the System Off buttons can be programmed for MacroPower control. To set it up, follow these easy steps:

1. To program MacroPower commands for the POWER [ON] button, press the POWER [ON] button and the [MUTE] button at the same time for two seconds until one of the component button LED lights turns on.
Universal Remote Control WR7 — MacroPower ™ Total System On/Off diagram (page 21)
Fig. 12 · MacroPower ™ Total System On/Off

POWER

MUTE

Page 22 of the Universal Remote Control WR7 user manual — CHANNEL
Page 22 · click to enlarge
Page 22
2. Press the component button you want to turn on and then the POWER [ON] button; repeat for all other components in the order you want them to turn on. The component LED lights will blink once each time you press the POWER [ON] button.
Universal Remote Control WR7 — PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE diagram (page 22)
Fig. 13

POWER

COMPONENT

BUTTONS

3. Once you’ve entered all the Power On commands, press the CHANNEL Up [CH ] button to save your MacroPower commands. The component LED lights will blink three times to confirm that the programming has been successfully saved.
Universal Remote Control WR7 — POWER diagram (page 22)
Fig. 14

CHANNEL

UP

SUGGESTION: Most of the components have the same signal to turn the power On and Off. You may want to program MacroPower only in the POWER [ON] button and save the [SYSTEM OFF] button to turn components On or Off individually.

Page 23 of the Universal Remote Control WR7 user manual — MY FAVORITES
Page 23 · click to enlarge
Page 23

Programming “ My Favorites ” - Favorite Channel Buttons

In Cable mode, the four [MY FAVORITES] buttons are also designed to serve as dedi- cated Favorite Channel buttons. Each button will access one of your favorite channels with just one button press. Here’s how to program Favorite Channels:

1. Press the [CABLE/SAT] button to select the Cable/SAT mode.
2. Press one of the [MY FAVORITES] buttons and the [MUTE] button at the same time for two seconds until the [CABLE/SAT] component LED turns on.

MUTE

Universal Remote Control WR7 — MUTE diagram (page 23)
Fig. 15

MY FAVORITES

Page 24 of the Universal Remote Control WR7 user manual — Notes regarding programming multi-commands to Macro buttons:
Page 24 · click to enlarge
Page 24
3. Using the Number Pad, punch in the Channel number of the Favorite Channel that you want to store in the Macro button. The CABLE/SAT component LED light will blink once for each button pressed.
4. Press the CHANNEL UP [CH ] button to store the commands entered. The [CABLE/SAT] component LED will blink three times to confirm the programming.
Universal Remote Control WR7 — PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE diagram (page 24)
Fig. 16

CHANNEL

UP

Notes regarding programming multi-commands to Macro buttons:

  • You can program up to 20 commands on each Macro button.
  • You can program delays in between commands by pressing the [PAUSE] button. Each press adds a one-half second delay.
  • Also, if you add the delay time as the first step of Macro commands, the remote will not send the Macro unless the button is held for two seconds. (This is the Press & Hold Function).
  • You can also program macro commands in “ layers ” by pressing the [STOP] button in between commands. (For example, if you press [009], [STOP], [035], [STOP], [365], [STOP] in Step 3 of the Favorite Channel programming process) the remote will send out 009 at the first press of the selected [My Favorites] button, and then send out 035 at the second press, etc.
  • You cannot program the [CH ] or [PAUSE] buttons as macro commands.
Page 25 of the Universal Remote Control WR7 user manual — SELECT
Page 25 · click to enlarge
Page 25

SimpleSound ™ Total System Volume Control

SimpleSound is one of the most exciting fea- tures of the WR7. It gives you total volume control over ALL the components in your sys- tem, even those that do not have built--in vol- ume control, such as TIVO, DVD and VCR. SimpleSound saves you the hassle and incon- venience of constantly switching between component modes just to control volume.

First you should identify which device in your system will be used to deliver sound. In a basic system, the sound may come from your TV speaker. In a more advanced system, the sound may come from your audio compo- nents (such as a Surround Sound Receiver or Home Theatre system).

Now, let’s set--up SimpleSound. Here’s how:

1. Press and hold the button that corresponds to the Component you want to add volume control to (such as a DVD or VCR) and the SELECT (SEL) button at the same time for about three seconds until the component LED light turns on.

COMPONENT

BUTTONS

Universal Remote Control WR7 — COMPONENT diagram (page 25)
Fig. 17

SELECT

Page 26 of the Universal Remote Control WR7 user manual — VOLUME
Page 26 · click to enlarge
Page 26
2. Press the VOLUME UP [VOL ] button and then press either the TV or AUDIO component button that you want to use for volume. The Component LED light will blink three times to confirm that it is saved. This sets up three buttons (Volume Up, Volume Down and MUTE) as a group for that component.
Universal Remote Control WR7 — PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE diagram (page 26)
Fig. 18

VOLUME

UP

Repeat Steps 1-2 for all other components.

Page 27 of the Universal Remote Control WR7 user manual — CHANNEL
Page 27 · click to enlarge
Page 27

Channel Control “ Punch Through ”

This “punch through” enables you to program the WR7 so that either the Cable or TV Channel Controls (CHANNEL UP, DOWN, LAST, CHANNEL NUMBERS 0-9, +10 and ENTER) will also operate in other component modes on the remote control.

1. Press and hold the component button you want to add channel control to, such as [DVD] or [VCR], and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on.
2. Press the CHANNEL UP [CH ] button. The component LED light will blink once.

COMPONENT

BUTTONS

Universal Remote Control WR7 — COMPONENT diagram (page 27)
Fig. 19

CHANNEL

UP

SELECT

3. Press either the [TV] or [CABLE/SAT] button that you want to use as the source of channel control. The component LED will blink three times to confirm it is saved.
Page 28 of the Universal Remote Control WR7 user manual — PLAY
Page 28 · click to enlarge
Page 28

Transport Control “ Punch Through ”

This “punch through” enables you to program the WR7 so that VCR or DVD Transport Controls (PLAY, STOP, FF, REW, PAUSE, SKIP and RECORD) will also operate in other component modes on the remote control.

1. Press and hold the component button you want to add Transport Control to, such as [CABLE/SAT] or [TV], and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on.
2. Press the [PLAY] button. The component LED light will blink once.

COMPONENT

BUTTONS

Universal Remote Control WR7 — COMPONENT diagram (page 28)
Fig. 20

SELECT

Universal Remote Control WR7 — SELECT diagram (page 28)
Fig. 21

PLAY

3. Press either the [DVD] or [VCR] button that you want to use as the source of Transport Control. The component LED will blink three times to confirm it is saved.
Page 29 of the Universal Remote Control WR7 user manual — COMPONENT
Page 29 · click to enlarge
Page 29

OSD (On-Screen Display) Control “ Punch Through ”

This “punch through” enables you to program the WR7 so that CBL or DVD OSD Controls (MENU, GUIDE, INFO, EXIT, SEL and 4 Cursor Controls) will also operate in other component modes on the remote control.

1. Press and hold the component button you want to add OSD Control to, such as [TV] or [VCR], and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on.
2. Press the [MENU] button. The component LED will blink once.
Universal Remote Control WR7 — OSD (On-Screen Display) Control “ Punch Through ” diagram (page 29)
Fig. 22 · OSD (On-Screen Display) Control “ Punch Through ”

COMPONENT

BUTTONS

SELECT

MENU

3. Press either the [CABLE/SAT] or [DVD] button that you want to use as the source of OSD Control. The component LED will blink three times to confirm it is saved.
Page 30 of the Universal Remote Control WR7 user manual — ENTER
Page 30 · click to enlarge
Page 30

Erasing Commands -

Overview

You can erase a single learned command, all learned commands in each component mode, SimpleSound programming, MacroPower com- mands, or re--set the remote to original factory default settings.

Erasing a Single Learned Command from One Component

1. Press the component button where the learned command is stored and the [ENTER] button at the same time for two seconds until the component LED light turns on.

COMPONENT

BUTTONS

Universal Remote Control WR7 — COMPONENT diagram (page 30)
Fig. 23

ENTER

2. Press and hold the button you want to erase for two seconds. The component LED light will blink twice to confirm the erasure.
3. Repeat Step 2 to erase any other buttons in the selected component mode.
4. To exit Erase mode, press and hold both the component button and the [ENTER] button at the same time until the component LED light blinks three times.
Page 31 of the Universal Remote Control WR7 user manual — PAUSE
Page 31 · click to enlarge
Page 31

Erasing All Learned Commands from One Component

This function allows you to erase all the learned commands from one component. For example, if you want to erase all learned commands on the TV component button because you bought a new TV, the process is very simple.

1. Press the component button where all the learned commands are stored and the [ENTER] button at the same time for two seconds until the component LED turns on.
2. Press and hold both the component button you want to erase and the [PAUSE] button at the same time for two seconds, until the component LED light blinks twice to confirm the erasure.

COMPONENT

BUTTONS

Universal Remote Control WR7 — COMPONENT diagram (page 31)
Fig. 24

PAUSE

ENTER

3. To exit Erase mode, press and hold both the component button and the [ENTER] button at the same time until the component LED light blinks three times.
Page 32 of the Universal Remote Control WR7 user manual — CHANNEL
Page 32 · click to enlarge
Page 32

Erasing MacroPower & Other Macro Commands

1. To erase MacroPower commands on the POWER [ON] or [SYSTEM OFF] button, press and hold either the POWER [ON] or [SYSTEM OFF] button and the [MUTE] button simultaneously for two seconds until the current status component LED turns on.
2. Press the CHANNEL UP [CH ] button to erase and exit Erase mode. The component LED light will blink three times to confirm the erasure.

SYSTEM

POWER

ON

OFF

Universal Remote Control WR7 — SYSTEM diagram (page 32)
Fig. 25
Universal Remote Control WR7 — SYSTEM diagram (page 32)
Fig. 26

CHANNEL

UP MUTE

Page 33 of the Universal Remote Control WR7 user manual — VOLUME
Page 33 · click to enlarge
Page 33

Erasing SimpleSound & Other “ Punch Through ” Commands

1. Press and hold the Component button you want to erase volume control from, such as DVD or VCR and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on.
2. Press the VOLUME UP [VOL ] button and the same component button from Step 1. The component LED light will blink three times to confirm the erasure.

COMPONENT

BUTTONS

Universal Remote Control WR7 — COMPONENT diagram (page 33)
Fig. 27

VOLUME

UP

SELECT

Repeat Steps 1--2 to erase SimpleSound commands from other components.

  • For Channel Control, press: CHANNEL UP [CH ]
  • For Transport Control, press: PLAY [ ]
  • For OSD Control, press: [MENU]
Page 34 of the Universal Remote Control WR7 user manual — RECORD
Page 34 · click to enlarge
Page 34

Factory Reset

You can reset your WR7 remote to the origi- nal factory default settings.

Press and hold both the [TV] and RECORD [REC] buttons for about five seconds until the [CABLE/SAT] component LED light blinks five times. All programming and set-up codes that you have entered into the remote will be erased and the WR7 will return to the original factory default settings.

Warning

This procedure will erase all programming and set-up codes that you have entered into the remote.

TV COMPONENT

BUTTON SAT/CABLE

Universal Remote Control WR7 — TV COMPONENT diagram (page 34)
Fig. 28
Universal Remote Control WR7 — TV COMPONENT diagram (page 34)
Fig. 29

RECORD

Page 35 of the Universal Remote Control WR7 user manual — AUDIO
Page 35 · click to enlarge
Page 35

Pre-Programmed

Code Tables

The WR7 Pre-Programmed code library is classi- fied by category (Audio, CD, VCR/DVR, etc.).

Within each category, the code numbers are list- ed in rows by brand (Sony, Panasonic, B & K, etc.). Some brands have more than one three- digit code.

Circle the correct row and refer to it while you perform setup operations.

AUDIO

Amps, Preamps & A/V Receivers

CD Players & Changers

CD

VCR/DVR

VCRs, DVRs & Combo Units

AUX

iPod, Media PC, Gaming System, Lighting Controls

TV

TVs, Plasmas, Projectors & Monitors

DVD

DVD Players & Recorders

CABLE/SAT

Cable Set Top Boxes & Satellite Receivers

Page 36 of the Universal Remote Control WR7 user manual — Brand Code Numbers Brand Code Numbers AUDIO
Page 36 · click to enlarge
Page 36

Brand Code Numbers Brand Code Numbers AUDIO

ADC 007 ADCOM 082 092 225 161 269 355 356 AIWA 170 018 104 202 203 213 211 188 AKAI 189 AMC 125 126 127 281 282 ANGSTROM 142 ANTHEM 335 337 ARCAM 141 418

OUTLAW 342 PANASONIC 032 195 219 177 292 383 PARASOUND 129 130 132 261 294 295 333 334 PHILIPS 249 250 251 063 119 805 PIONEER 014 039 044 069 168 116 035 078 198 480 POLKAUDIO 515 PROCEED 144 268 RCA 010 048 117 156 067 288 REALISTIC 019 056 073 075 095 ROTEL 074 083 085 RUSSOUND 379 391 392 SAMSUNG 016 804 SANSUI 040 048 110 119 065 228 SANYO 047 SCOTT 019 091 SHARP 026 094 026 175 SHERWOOD 024 102 106 447 SIRIUS 555 SONY 018 247 248 166 101 184 218 271 369 372 380 800 SOUNDESIGN 036 SSI 068 SUNFIRE 344 345 346 TEAC 005 019 049 040 212 217 TECHNICS 122 176 193 219 178 177 200 257 262 THETA DIGITAL 136 TOSHIBA 060 087 198 278 XM SATELLITE RADIO 515 YAMAHA 026 253 169 067 173 264 232 089 264 274 285 373 803 ZENITH 143 210

ATLANTIC TECHNOLOGY 342 AUDIO FILE 071 AUDIO MATRIX 167 AUDIO TECHNICA 134 B & K 096 097 BOSE 070 170 224 347 409 460 BOSTON ACOUSTICS 447 BRIX 555 CARVER 006 028 061 071 201 214 226 185 022 077 284 CINEMA SOUND 134 CITATION 148 272 CLARION 026 DELPHI 515 DENON 109 215 230 234 330 001(Default) 801 DVICO 802 ELAN 057 290 ENLIGHTENED AUDIO 099 098 ESCIENT 368 451 FISHER 047 214 182 297 FLEXTRONICS 378 FOSGATE AUDIONICS 231 342 GE 056 GOLDSTAR 008 HARMAN KARDON 231 233 153 154 118 318 HITACHI 020 INTEGRA 275 781 INSIGNIA 589 JAMO 398 799 JCPENNEY 216 JENSEN 058 JVC 163 191 114 279 291 KENWOOD 026 066 145 192 182 005 280 374 KLH 331 KOSS 216 KRELL 072 376 384 KYOCERA 007 LEXICON 120 235 236 237 357 360 LINN 124 377 LUXMAN 139 052 165 115 004 009 LXI 056 MAGNAVOX 086 164 152 208 MARANTZ 006 028 031 040 063 185 479 251 265 119 289 MCINTOSH 238 286 MERIDIAN 100 012 013 MITSUBISHI 242 243 204 MONDIAL 157 158 042 043 081 112 MYRYAD 276 293 NAD 113 283 478 479 NAKAMICHI 040 244 245 172 183 287 NEC 176 NIRO 343 NILES 403 ONKYO 017 046 108 080 209 275 OPTIMUS 026 041

SATELLITE Radios BRIX 555 DELPHI 515 POLKAUDIO 515 SIRIUS 555 SONY 380 XM SATELLITE RADIO 515

Page 37 of the Universal Remote Control WR7 user manual — Brand Code Numbers Brand Code Numbers CD
Page 37 · click to enlarge
Page 37

Brand Code Numbers Brand Code Numbers CD

ADCOM 062 042 AIWA 089 170 187 AKAI 202 AMC 231 232 ARCAM 238 AUDIO ACCESS 119 147 AUDIO EASE 165 AUDIO TECHNICA 046

THETA DIGITAL 234 235 VICTOR 004 022 WARDS 185 033 YAMAHA 024 046 054 186 183 245

CALIFORNIA AUDIO 147 008 CARVER 185 041 050 107 130 134 135 138 139 203 204 167 CREEK 159 DENON 002 123 EMERSON 042 FISHER 050 185 134 008 GENEXXA 010 HARMAN KARDON 033 047 208 HITACHI 042 175 INKEL 130 JCPENNEY 141 JENSEN 158 JVC 004 022 136 163 213 214 242 243 KENWOOD 185 007 023 055 071 072 142 137 254 KRELL 241 255 KYOCERA 005 LUXMAN 011 028 070 249 252 MAGNAVOX 107 MARANTZ 041 051 077 107 209 246 MCINTOSH 212 247 MEMOREX 010 MISSION 107 MITSUBISHI 179 MONDIAL 147 MYRYAD 244 155 NAD 005 178 NAKAMICHI 217 218 NEC 062 NIKKO 046 NSM 107 ONKYO 030 038 039 168 169 OPTIMUS 010 050 081 PANASONIC 147 172 008 068 248 PARASOUND 233 240 PHILIPS 041 107 246 PIONEER 010 020 174 175 176 PROCEED 239 PROTON 107 QUASAR 147 008 RCA 017 042 150 REALISTIC 042 050 051 187 ROTEL 107 161 178 250 SAE 107 SANSUI 107 128 171 190 125 SANYO 050 SHARP 026 031 051 SHERWOOD 051 096 112 115 119 166 SIGNATURE 033 SONY 048 081 097 126 133 177 001(Default) 226 164 SOUNDESIGN 251 SUMO 155 SYLVANIA 107 SYMPHONIC 052 TANDY 010 TEAC 051 052 233 079 TECHNICS 147 172 184 008 068

Page 39 of the Universal Remote Control WR7 user manual — AUDIO AUTHORITY / PS3 622
Page 39 · click to enlarge
Page 39

AUX

PC & iPod Controls APPLE 401 412 476 BOSE 409 DLO 418 GRIFFIN 471 IPORT 419 KENSINGTON 406 SONACE 419 TEN TECHNOLOGY 401

MEDIA PC Controls DELL 001 262 GATEWAY 001 262 HAUPPAUGE 294 295 HP 001(Default) 262 KEYSPAN 297 SONY 001 262 TOSHIBA 001 262 WINBOOK 001 262

MICROSOFT / XBOX 408 107 SONY / PS2 414 SONY / PS3 598

AUDIO AUTHORITY / PS3 622

LIGHTING Controls LITE-TOUCH 208 257 LUTRON 158 159 077 X-10 183 093

D2A ARTEC 586 CASTI 587 CRAIG 588 DIGITAL STREAM 609 GRIDLINK 592 INET ACCESS 589 INSIGNIA 567 LASONIC 592 MAGNAVOX 584 RCA 585 SANSONIC 592 TIVAX 589 590 ZENITH 567 ZENTECH 610 ZINWELL 591 593

Brand Code Numbers · GAMING SYSTEM Controls

Page 40 of the Universal Remote Control WR7 user manual — Brand Code Numbers Brand Code Numbers TV
Page 40 · click to enlarge
Page 40

Brand Code Numbers Brand Code Numbers TV

ABEX 025 ADMIRAL 072 251 333 160 ADVENT 247 ADVENTURA 002 AKAI 197 146 248 473 474 475 405 A MARK 112 143 AMPRO 167 073 AMSTRAD 052 ANAM 043 054 056 080 112 AOC 197 363 112 058 APEX DIGITAL 006 591 AQUAVISION 573 574 ASTAR 477 AUDIOVOX 076 BELCOR 116 BELL&HOWELL 333 072 BROKSONIC 238 BROCKWOOD 116 CAIRN 201 CANDLE 197 002 003 363 CAPEHART 058 CELEBRITY 001 CENTURION 197 CETRONIC 043 CITIZEN 197 002 003 363 043 258 103 143 CLASSIC 043 CLP CLASSIC 333 COLORTYME 116 197 CONCIERGE 073 CONCERTO 363 CONTEC 043 050 051 CORNEA 116 CORONADO 143 CRAIG 043 054 CROWN 043 143 CURTIS MATHES 197 258 363 143 CXC 043 DAEWOO 363 043 076 103 127 143 DAYTRON 363 143 DELL 319 320

GE 160 144 165 073 197 008 009 034 056 074 130 155 333 363 GEM 391 GIBRALTAR 116 073 GOLDSTAR 113 116 102 363 106 112 127 143 HALL MARK 363 HAIER 164 363 HANNSPREE 381 HISENSE 419 442 HITACHI 011 166 363 009 010 012 023 075 143 158 072 250 587 HP 316 327 378 HUMAX 518 ILO 472 399 INFINITY 164 INFOCUS 330 333 547 548 532 INTEQ 073 INSIGNIA 350 354 457 399 164 454 JANEIL 002 JBL 164 JCB 001 JCPENNEY 363 024 197 008 009 030 065 258 143 160 JENSEN 013 JVC 038 034 001 083 199 210 240 406 581 KAWASHO 116 001 197 KEC 043 KENWOOD 197 001 KLEGG 470 KLOSS 002 059 KMC 143 KONKA 457 KREISEN 530 KTV 043 197 143 154 KURAZAI 072 LG 113 116 102 106 112 127 143 284 363 569 576 LODGENET 072 LOEWE 164 LOGIK 072 LUXMAN 363 LXI 166 007 138 052 251 160 164 MAGNAVOX 164 059 197 003 060 061 363 063 064 127 022 160 094 226 467 MAJESTIC 333 072 MARANTZ 197 164 MATSUI 164 MAXENT 242 MEGATRON 116 197 011 MEMOREX 007 072 363 MGA 197 363 024 028 042 MIDLAND 333 073 MINUTZ 008 MITSUBISHI 109 124 024 363 028 040 042 146 348 450

DIGITAL PROJECTION 570 DIMENSIA 333 DREAMVISION 235 DUKANE 011 025 DUMONT 116 073 DURABRAND 096 DWIN 177 257 DYNASTY 043 DYNATECH 062 DYNEX 399 EIKI 187 ELECTROBAND 001 ELECTROGRAPH 470 ELECTROHOME 143 024 076 196 ELEKTRA 072 ELEMENT 363 494 EMERSON 028 048 043 155 005 197 363 047 050 051 076 096 143 151 153 154 ENVISION 116 197 ESA 323 FISHER 007 057 FUJITSU 198 246 346 FUNAI 028 043 052 FUTURETECH 043 GATEWAY 242 268

Universal Remote Control WR7 — Brand Code Numbers Brand Code Numbers TV diagram (page 40)
Fig. 30 · Brand Code Numbers Brand Code Numbers TV

MONTGOMERY WARD 333 072 MTC 197 363 062 258 NAD 138 025 NEC 130 134 197 040 024 056 019 237 262 272 575 577 NET TV 202 NIKEI 043

Page 41 of the Universal Remote Control WR7 user manual — Brand Code Numbers Brand Code Numbers TV
Page 41 · click to enlarge
Page 41

Brand Code Numbers Brand Code Numbers TV

NIKKO 116 197 NIKO 527 NORCENT 390 NUVISION 351 567 OLEVIA 432 363 ONKING 043 ONWA 043 OPTIMUS 025 OPTONICA 019 251 OPTOMA 265 270 249 ORION 096 PANASONIC 034 056 080 164 208 524 583 PHILCO 197 003 059 060 064 164 363 024 056 063 PHILIPS 164 005 093 038 197 003 363 059 127 206 333 431 594 PILOT 116 PIONEER 135 025 197 018 023 116 234 272 374 393 POLAROID 323 328 353 354 356 457 494 505 PORTLAND 363 143 PROSCAN 144 160 333 165 167 PROTON 363 112 058 143 171 172 193 PROTRON 498 499 392 398 PROVIEW 494 PROX 572 PULSAR 116 073 QUASAR 034 056 RADIO SHACK 019 363 143 043 127 RCA 160 165 065 144 197 363 024 056 152 023 074 333 588 REALISTIC 007 019 043 047 REVOLUTION HD 470 RUNCO 072 169 178 179 180 181 182 073 342 416 395 SAMPO 197 058 363 202 SAMSUNG 050 089 105 363 127 143 160 228 229 258 578 SAMSUX 197 SANSUI 096 399 SANYO 166 007 020 053 057 082 187 SCEPTRE 276 SCOTCH 116 197 SCOTT 028 043 363 048 143 497 SEARS 138 030 363 007 028 057 143 094 160 082 165 166 SELECO 189 200 205 011 SHARP 019 014 028 029 363 022 143 175 251 308 496 SHOGUN 116 SIGNATURE 072 SIMPSON 003 SONY 001(Default) 147 185 085 213 277 279 SOUNDESIGN 028 363 003 043 SOYO 528 SPECTRICON 112 SPECTRONIQ 499 SSS 363 043 SUPRA 116 SUPRE MACY 002 SUPREME 001

SVA 328 SYLVANIA 197 003 052 059 060 063 064 164 160 127 593 SYNTAX OLEVIA 333 144 160 376 432 363 TANDY 251 TATUNG 056 062 TECHNICS 034 080 TECHWOOD 363 TEKNIKA 002 003 363 024 028 043 072 258 143 TELEFUNKEN 037 046 TELERENT 072 TERA 172 TMK 363 TOSHIBA 138 030 007 040 062 258 325 TOTEVISION 143 TRUTECH 529 UNIVERSAL 008 009 VICTOR 038 VIDEO CONCEPTS 146 VIDIKRON 174 164 188 192 342 VIDTECH 363 VIEWSONIC 242 433 VIKING 002 VIORE 472 592 VISCO 494 VITO 363 VIZIO 391 603 WARDS 363 008 009 019 028 060 061 063 064 072 074 143 164 034 WESTINGHOUSE 076 276 001 YAMAHA 197 363 370 372 408 YORK 363 YUPITERU 043 ZENITH 073 072 095 103 284 ZONDA 112

Page 42 of the Universal Remote Control WR7 user manual — DVD
Page 42 · click to enlarge
Page 42

DVD

Brand Code Numbers Brand Code Numbers

AIWA 146 AKAI 281 ALPINE 098 APEX DIGITAL 087 282 115 BROKSONIC 130 CINEVISION 091 COBY 260 CYBERHOME 271 DENON 138 080 173 DURABRAND 091 DVD 2000 017 EMERSON 091 143 ESA 143 FISHER 147 FUNAI 143 GE 027 GO VIDEO 137 091 220 221 265 GOLDSTAR 091

SYLVANIA 143 SYMPHONIC 143 TATUNG 102 TEAC 107 TECHNICS 042 TECHWOOD 088 THOMPSON 027 TOSHIBA 130 141 164 188 273 VENTURER 149 X-BOX 027 YAMAHA 042 089 166 138 197 334 ZENITH 057 091

BLU-RAY & HD DVDs LG 091 PANASONIC 285 PIONEER 304 SAMSUNG 275 SONY 286 TOSHIBA 273

HARMAN KARDON 084 140 HITACHI 101 ILO 268 INITIAL 282 INSIGNIA 143 INTEGRA 142 338 JBL 084 JVC 012 KENWOOD 151 KISS 279 KLH 135 KRELL 104 LEXICON 148 LG 091 057 LITEON 264 265 MAGNAVOX 001 096 143 282 MALATA 267 MARANTZ 083 095 MERIDIAN 153 MICROSOFT 027 MINTEK 282 MITSUBISHI 017 MYRYAD 102 134 NAD 088 NAKAMICHI 103 ONKYO 076 141 142 338 OPPO 266 341 OPTIMUS 107 ORION 130 PANASONIC 042 138 144 150 285 PHILIPS 001(Default) 083 095 166 344

DVD Recorders CYBERHOME 271 GO VIDEO 220 221 265 ILO 268 KISS 279 LITEON 265 PANASONIC 138 SENSORY SCIENCE 265 SONY 191 TOSHIBA 188

TV/DVD Combos AIWA 146 AKAI 281 DURABRAND 143 ESA 143 FUNAI 143 INSIGNIA 143 MAGNAVOX 282 MINTEK 282 SAMSUNG 165 SV2000 143 SYLVANIA 143 SYMPHONIC 143 TOSHIBA 130

TV/DVD/VCR Combos EMERSON 143 INSIGNIA 143 MAGNAVOX 143 PANASONIC 144 SUPERSCAN 143 SYLVANIA 143 TOSHIBA 164

PHILIPS-MAGNOVOX 141 001 PIONEER 023 092 099 107 108 131 304 POLAROID 233 POLK AUDIO 141 001 PROSCAN 027 RCA 027 RJTECH 269 SAMSUNG 056 165 170 137 159 275 SANSUI 130 SANYO 147 SEARS 130 Sensory Science 265 SHARP 094 SONY 033 118 145 126 191 286 242 243 343 SUPERSCAN 143 SV2000 143

DVD/VCR Combos GO VIDEO 137 PANASONIC 150 PHILIPS 001 (VCR Functions for VCR 067) SAMSUNG 137 159 SANSUI 130 SONY 145 191 TOSHIBA 141 ZENITH 091 (VCR Functions for VCR101)

Page 43 of the Universal Remote Control WR7 user manual — GENERAL INSTRUMENT 074 104 GNC 099
Page 43 · click to enlarge
Page 43

CABLE/SAT

Brand Code Numbers Brand Code Numbers

CABLE BOXES ABC 004 042 053 ADB 315 254 255 259 ADELPHIA 001 074

SUSQUEHANNA 001 074 TELNET 154 TIME WARNER 001 074 TOCOM 056 UNITED CABLE 004 053 VERIZON 110 VIDEOTRON 001 VIEWSTAR 012 015 WEGENER 250 WIDE OPEN WEST 001 099 ZENITH 093 100

ADVANCED NEWHOUSE 001 ALTRIO 001 AMERICAST 099 AMINO 256 257 260 261 ARMSTONG 074 AT&T BROADBAND 074 035

ATLANTIC BROADBAND 001 074 BELL SOUTH 099 BLUE RIDGE 001 074 BRESNAN 074 BRIGHT HOUSE 001 110 BUCKEYE COMM 074 CABLEVISION 001 074 108 CHARTER 001 074 CISCO 001 041 042 045 313 035 356 COGECO 074 COMCAST 001 074 110 313 COMSAT 074 COX DIGITAL 001 074 DIGEO 111 EAGLE 020 030 EASTERN 057 ENTONE 316 258 GEMINI 008

SATELLITE RECEIVERS CABLEVISION 148 DIRECTV 173 DISH NETWORK 122 ECHOSTAR 122 EXPRESSVU 122 GENERAL ELECTRIC 116 150

GENERAL INSTRUMENT 148 GOI 122 HITACHI 139 140 HTS 122 HUGHES 114 JVC 122 LG 170 MITSUBISHI 114 MOTOROLA 148 NEXT LEVEL 148 NFUSION 192 PANASONIC 142 160 PHILIPS 152 153 156 114 PROSCAN 116 150 RADIOSHACK 148 RCA 116 150 SAMSUNG 155 163 169 175 SKY 164 SONY 115 STAR CHOICE 148 TOSHIBA 127 114 158 VOOM 148

GENERAL INSTRUMENT 074 104 GNC 099

GOLDEN CHANNEL 030 HAMLIN 049 055 HITACHI 055 INSIGHT 074 JERROLD 074 004 002 008 009 010 069 MAGNAVOX 010 012 MASSILLON 074 MEDIACOM 074 MOTOROLA 074 110 148 111 112 036 MOXI 111 252 086 MYRIO 254 255 NCTC 074 NOW TV 314 NSC 015 038 OAK 031 053 PACE 001 074 110 313 PANASONIC 044 047 PHILIPS 006 012 013 020 085 PIONEER 001(Default) 034 051 063 105 QUEST 112 RCA 047 RCN 074 REGAL 049 REGENCY 057 RODGERS 001 SAMSUNG 030

SCIENTIFIC ATLANTA 001 041 042 045 035 SEREN 001 SERVICE ELECTRIC 074 SHAW 074 SIGECOM 001 SONY 108 SPRUCER 047 STARCOM 002 004 008 009 STARGATE 008 030 104

Page 44 of the Universal Remote Control WR7 user manual — E-Mail us at techsupport@universalremote.com
Page 44 · click to enlarge
Page 44

Frequently Asked

Questions

If the batteries run out, will I lose my settings?

No. The WR7 stores all of your settings in non- volatile FLASH memory. You could remove the batteries for months, replace them at your con- venience, and the WR7 would still remember your settings.

What is MacroPower?

MacroPower is a very useful way to make a lot of things happen with one button push. For example, in most home theaters, to watch televi- sion, the user must turn on the TV, then turn on the Cable Box or the Satellite Receiver, then turn on the Surround Sound system for sound. Instead of pressing all of those buttons one at a time, MacroPower enables you to turn on all of these components, in the sequence you want, with one button push. For more information on why and how you should program MacroPower commands, refer to page 21 in this Manual.

What if my remote control no longer works from a distance?

Replace the batteries with new Alkaline batteries.

Who can I contact for more answers?

The Universal Remote Control technical support and customer service staff are ready to answer any questions you might have.

E-Mail us at [email protected]

Visit our website www.universalremote.com

Call us at (914) 835-4484

Monday - Friday, 9AM to 6PM (EST)

Page 45 of the Universal Remote Control WR7 user manual — Learning Capability
Page 45 · click to enlarge
Page 45

USA Limited

Warranty

UNIVERSAL REMOTE CONTROL, INC. war- rants this product against defects in material or workmanship for a period of one (1) year and as set forth below. Universal Remote Control will, at its sole option, repair the product using new or comparable rebuilt parts, or exchange the product for a comparable new or rebuilt product.

This warranty not does apply to the following:

  • Units purchased from unauthorized resellers.
  • Units purchased second-hand (used).
  • Units installed or deployed for rental or commercial use.
  • Damage caused by misuse, neglect, or acts of nature.
  • Products that have been modified or incorporated into other products.
  • Products purchased more than 12 months ago.

Specifications

Learning Capability

................................80 buttons for any component

Macro Capability

..........................13 Macros of up to 20 steps each

Non-Volatile Flash Memory

...............................................................64 KByte

IR Range (Line of Sight via Infrared)

....................30--50 feet, depending on operational

environmental conditions

Weight .............................6.9 oz. (with batteries)

Size ...................2 1/8”W x 8 3/4”H x 1 1/8”D

Batteries ......Two AA Alkaline batteries (included)

Page 46 of the Universal Remote Control WR7 user manual — MEMO
Page 46 · click to enlarge
Page 46

MEMO

Page 47 of the Universal Remote Control WR7 user manual — MEMO
Page 47 · click to enlarge
Page 47

MEMO

Page 48 of the Universal Remote Control WR7 user manual — MEMO
Page 48 · click to enlarge
Page 48

MEMO

Page 49 of the Universal Remote Control WR7 user manual — MEMO
Page 49 · click to enlarge
Page 49

MEMO

Page 50 of the Universal Remote Control WR7 user manual — MEMO
Page 50 · click to enlarge
Page 50

MEMO

Page 51 of the Universal Remote Control WR7 user manual — MEMO
Page 51 · click to enlarge
Page 51

MEMO

Page 52 of the Universal Remote Control WR7 user manual — The Pioneer in Control Technology
Page 52 · click to enlarge
Page 52

The Pioneer in Control Technology

500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532

www.universalremote.com

OCE-0085A Rev 02

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Universal Remote Control WR7

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Universal Remote Control WR7

Be the first to ask — other owners or our team will answer.

Original document

Universal Remote Control WR7 manual PDF

52 pages·1.2 MB·Universal Remote·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…