EN
Universal Remote Control logo
Official user manual

Universal Remote Control MX-800

16 pages·5.7 MB·Universal Remote·PDF·ENDEFRITNLJA
Universal Remote Control MX-800
Table of Contents 3 sections Finding the MAIN Menu · Cleaning the Screen · Warranty ShowHide
Page 1 of the Universal Remote Control MX-800 user manual — W ITH Y OUR
Page 1 · click to enlarge
Page 1

G UIDE TO

S IMPLE H OME T HEATER

O PERATION

W ITH Y OUR

MX-800 RF R EMOTE C ONTROL

Universal Remote Control MX-800 — W ITH Y OUR diagram (page 1)
Fig. 1
Page 2 of the Universal Remote Control MX-800 user manual
Page 2 · click to enlarge
Page 2

This remote control was Custom Programmed for you by:

For questions about your Custom Programming call:

Custom Programming of a complex home theater is one of the most chal- lenging tasks within a home theater installation. It involves an intimate knowledge of how the components interact and exact details on the proper sequences of control.

Only a Home Theater Master dealer has the requisite experience and train- ing to quickly and effectively customize a remote control for true automated operation.

Congratulations on your choice!

GUIDE TO SIMPLE HOME THEATER OPERATION WITH YOUR MX800 RF REMOTE CONTROL © 2003 Universal Remote Control, Inc. All rights reserved.

The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CON- TROL, INC. SHALL NOT BE LIABLE FOR OPERA- TIONAL, TECHNICAL OR EDITORIAL ERRORS/OMIS- SIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice. Home Theater Master is a registered trademark of Universal Remote Control, Inc. Entertainment Made Simple is a trademark of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.

500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532

Page 3 of the Universal Remote Control MX-800 user manual — No More Pointing 1
Page 3 · click to enlarge
Page 3

Table of Contents

No More Pointing 1

Finding the MAIN Menu 2

Turn On the System 3

Using the MAIN Menu 4

Select a New ACTIVITY 4

Select a DEVICE Only 5

Controlling the Volume 6

Operating Any Device 6

Using FAV - Favorites 8

Backlighting 10

Changing CONTRAST 10

Batteries 11

Cleaning the Screen 11

Warranty 12

Specifications 12

Page 4 of the Universal Remote Control MX-800 user manual — No More Pointing!
Page 4 · click to enlarge
Page 4

No More Pointing!

The combination of the RF MX-800 with it’s companion MRF-200 base sta- tion will enable you to have your home theater components out of sight behind closed doors; yet you will still enjoy perfect remote control of all functions. The MX-800 sends radio signals to the MRF-200 through closed doors, out of the standard line-of-sight. The MRF- 200 converts your commands to the infrared signals that control your A/V components.

The MX-800 remote con- trol sends radio waves in every direction, so you don’t have to point the remote anymore!

Universal Remote Control MX-800 — No More Pointing! diagram (page 4)
Fig. 2 · No More Pointing!
Universal Remote Control MX-800 — No More Pointing! diagram (page 4)
Fig. 3 · No More Pointing!

Self-adhesive “Flashers” affixed to the front panels of components relay commands to components out of “line- of-sight” with the MRF-200.

Universal Remote Control MX-800 — No More Pointing! diagram (page 4)
Fig. 4 · No More Pointing!

The built-in Front Blaster sends com- mands to components in the same cabinet space as the MRF-200.

The MX-800 · The MRF-200

Page 5 of the Universal Remote Control MX-800 user manual — PAGE 1
Page 5 · click to enlarge
Page 5

Finding the MAIN Menu

The MAIN Button always takes you to the MAIN Menu.

Universal Remote Control MX-800 — Finding the MAIN Menu diagram (page 5)
Fig. 5 · Finding the MAIN Menu

The PAGE button switches between two MAIN Menu pages IF you have more than ten remote controls.

When the top title bar says MAIN, you are on the MAIN Menu.

Universal Remote Control MX-800 — Finding the MAIN Menu diagram (page 5)
Fig. 6 · Finding the MAIN Menu

PAGE 1

The lower title bar displays PAGE 1 or PAGE 2 as you switch. Each of the remote controls are represented by a button next to the corresponding screen label.

Universal Remote Control MX-800 — PAGE 1 diagram (page 5)
Fig. 7
Page 6 of the Universal Remote Control MX-800 user manual — Turn On Your Entire System
Page 6 · click to enlarge
Page 6

Turn On Your Entire System

Power on/off your entire system with the MAIN Menu by following these steps:

1. Touch the MAIN button to make sure that you are on the MAIN Menu. It doesn’t matter which page of the MAIN Menu is displayed.
Universal Remote Control MX-800 — Turn On Your Entire System diagram (page 6)
Fig. 8 · Turn On Your Entire System
2. Point the the remote control at the system (usually a repeating sensor near the screen).
3. Touch the On or Off button as desired. Wait until all components are correctly powered on or off. Turning on the system may take ten to twenty seconds.
Universal Remote Control MX-800 — Turn On Your Entire System diagram (page 6)
Fig. 9 · Turn On Your Entire System
4. If one component does not turn on/off, simply touch the button again. TIP – The remote control is still issuing commands while the indicator flashes.
Page 7 of the Universal Remote Control MX-800 user manual — Select a New ACTIVITY
Page 7 · click to enlarge
Page 7

Using the MAIN Menu

The MAIN Menu enables you to either select a new Activity or simply select a new Device to control.

When you select a new activity, the remote control will issue a MACRO (a timed sequence of many commands from many different remote controls). This MACRO was custom pro- grammed for your system by your installer. It will issue all of the com- mands necessary to switch the sound and picture of your system.

When you select a device, the remote control becomes the remote control you select WITHOUT affecting the home theater.

Select a New ACTIVITY

1. Touch the MAIN button to make sure that you are on the MAIN Menu. Touch the PAGE button if you don’t see the activity you want.
Universal Remote Control MX-800 — Select a New ACTIVITY diagram (page 7)
Fig. 10 · Select a New ACTIVITY
2. Touch the activity button next to the desired screen label. For example if you wish to watch a DVD movie, touch the DVD button.
Page 8 of the Universal Remote Control MX-800 user manual — Select a DEVICE Only
Page 8 · click to enlarge
Page 8
Universal Remote Control MX-800 — Finding the MAIN Menu diagram (page 8)
Fig. 11 · Finding the MAIN Menu

The MAIN Menu buttons issue MACROS that reset the sound and picture of your home theater to a new activity.

indicator flashes. .

If the sound or the picture still are not correct, repeat steps 1 and 2.

Select a DEVICE Only

1. Touch the MAIN button to make sure that you are on the MAIN Menu. Touch the Page button if you don’t see the activity you want.
2. Press and hold the MAIN button. While holding the MAIN button down, touch the button next to the desired screen label. The remote control will now display the name of the selected device and all buttons will operate the device, however, the sound and the picture of your system have not been changed.
Page 9 of the Universal Remote Control MX-800 user manual — DVD
Page 9 · click to enlarge
Page 9

Controlling the Volume

For your convenience, the VOLUME Up, VOLUME Down and the MUTE buttons will always control the sur- round sound system, regardless of what activity or device you are control- ling.

Universal Remote Control MX-800 — Controlling the Volume diagram (page 9)
Fig. 12 · Controlling the Volume

Operating any Device

You can see the name of the device at the top of the screen. If it is not the one you want, return to the MAIN Menu and select a new device or activity.

Universal Remote Control MX-800 — Operating any Device diagram (page 9)
Fig. 13 · Operating any Device

DVD

OPEN CLOSE

Universal Remote Control MX-800 — DVD diagram (page 9)
Fig. 14

All of the printed label buttons on the remote operate just like the original remote control (with the exception of Volume Up, Volume Down and Mute which operate your surround sound sys- tem).

Page 10 of the Universal Remote Control MX-800 user manual — DVD
Page 10 · click to enlarge
Page 10

The Power ON and OFF buttons now operate only the selected device (to turn the entire system on/off, return to the MAIN Menu).

Universal Remote Control MX-800 — Finding the MAIN Menu diagram (page 10)
Fig. 15 · Finding the MAIN Menu

DVD

The ten screen labeled buttons are now labeled with any commands that do not fit one of the buttons with printed labels.

Universal Remote Control MX-800 — DVD diagram (page 10)
Fig. 16

DVD

OPEN CLOSE

AUDIO VIDEO

ANGLE SCENE

TITLE SUB

SKIPSKIP+

Up to 40 screen labeled buttons are available for each device. To view the additional buttons, press the PAGE button to display additional pages. The the remote control can display up to four pages of screen labeled buttons for each activity or device! As you scroll through the pages, notice that the bottom title bar displays which page you are viewing (PAGE 1, PAGE 2, etc.).

Page 11 of the Universal Remote Control MX-800 user manual — Using FAV - Favorites
Page 11 · click to enlarge
Page 11

The thumbpad easily operates on screen menus with either the Left or Right hand. When you are operating a device with any kind of on-screen menu, guide or display, the thumbpad offers you easy one-handed control with your thumb.

Universal Remote Control MX-800 — Finding the MAIN Menu diagram (page 11)
Fig. 17 · Finding the MAIN Menu

To SELECT or say OK, simply press your thumb straight down. You’ll feel the click as the OK/SELECT/ENTER command is sent.

Using FAV - Favorites

The favorites menu is created uniquely for you by your custom installer. The screen labeled buttons now issue timed sequences of commands that will reset your system with one touch. Typically, the favorites menu is pro- grammed with one touch “shortcut” buttons that issue all of the necessary commands to change the channel of your satellite dish or television. Thus, instead of entering a two or three digit number (which you must remember) and the enter command, you simply select the favorite button labeled HBO, CNN, TNT etc.

The Favorite menu can be programmed with any favorite activity. It is not limited to channel favorites. Your custom installer may invent a feature unique to

Page 12 of the Universal Remote Control MX-800 user manual — FAV
Page 12 · click to enlarge
Page 12

your system. Discuss any non-channel favorite label with your installer, so that you understand how to use it.

To use the FAVORITE Menu:

1. Press the FAV button. The top title bar will now display FAV.
Universal Remote Control MX-800 — Finding the MAIN Menu diagram (page 12)
Fig. 18 · Finding the MAIN Menu

Use the FAV button and the PAGE button to navigate through your var- ious pages of FAVORITES. The FAV button scrolls up from Page 1 to Page 5, using the PAGE button scrolls down from Page 5 to Page 1. As you select a new page, the bot- tom title bar will display the page number (page 1, page 2, etc.)

Universal Remote Control MX-800 — Finding the MAIN Menu diagram (page 12)
Fig. 19 · Finding the MAIN Menu

FAV

HBO SHOW

CNN ESPN

CNBC SPORT

DISCO LEARN

NICK DISNY

To EXIT Fav and return to the last activity/device selected, press the MAIN button ONCE. To EXIT Fav and go to the MAIN Menu, press the MAIN button twice.

Page 13 of the Universal Remote Control MX-800 user manual — Changing Contrast
Page 13 · click to enlarge
Page 13

Backlighting

Universal Remote Control MX-800 — Backlighting diagram (page 13)
Fig. 20 · Backlighting

Turn on the back- lighting by pressing the LIGHT button on the right side of the the remote control remote control. The backlighting will stay on briefly, then turn off automatically. If you wish to turn it off without waiting, sim- ply tap the LIGHT button again.

* Note that your bat- tery life is reduced by how often you use the backlighting.

Changing Contrast

Press and Hold BOTH the MAIN and the UP thumbpad button at the same time to make the screen DARKER.

Universal Remote Control MX-800 — Changing Contrast diagram (page 13)
Fig. 21 · Changing Contrast

Press and Hold BOTH the MAIN and the DOWN thumbpad button at the same time to make it LIGHTER.

Page 14 of the Universal Remote Control MX-800 user manual — Cleaning The Screen
Page 14 · click to enlarge
Page 14

Batteries

If the batteries are running low, the screen will display a warning at the bot- tom of the screen whenever you press the Power ON button. You may also experience a slight drop in the operating distance of either the MX-800 remote control when the batteries are running low.

Please replace all of the batteries with fresh, new AAA batteries. Do not mix old and new batteries.

The MX-800 will retain all program- ming even if the batteries are removed for an extended period.

Cleaning The Screen

Do not use abrasives or liquid cleaning solutions!

Use a dry soft lint-free cloth to clean the screen. Be careful not to use excessive force. The screen is glass and is easily breakable.

Page 15 of the Universal Remote Control MX-800 user manual — Specifications
Page 15 · click to enlarge
Page 15

Warranty

The MX-800 is covered against any manufacturers defects or workmanship for a period of one year from the date of purchase. This warranty does not cover the following items:

-Batteries, or damage to the remote from faulty batteries. -Damage from misuse, neglect, or acts of nature. -Products that have been modified or incorporated into other products. -Products purchased more than 12 months from the current date. -Units purchasedfrom unauthorized dealers or companies.

Specifications

Range: 30 to 50 feet, depending upon the environment Weight: 8 oz. (with batteries) Size: 9.0” x 3.0” x 1.3” Batteries: Four AAA Alkaline batteries included LCD Size: 1.4” x 2.1” RF Frequency: 418MHz

Page 16 of the Universal Remote Control MX-800 user manual — Cleaning the Screen
Page 16 · click to enlarge
Page 16
Universal Remote Control MX-800 — Cleaning the Screen diagram (page 16)
Fig. 22 · Cleaning the Screen

500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532

Ask about the Universal Remote Control MX-800

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Universal Remote Control MX-800

Be the first to ask — other owners or our team will answer.

Original document

Universal Remote Control MX-800 manual PDF

16 pages·5.7 MB·Universal Remote·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…