EN
Universal Remote Control logo
Official user manual

Universal Remote Control MX-3500

60 pages·4.6 MB·Universal Remote·PDF·ENDEFRITNLJA
Universal Remote Control MX-3500
Table of Contents 80 sections Owner’s · Manual · Thank You! · TM · … ShowHide
Owner’sp.1Manualp.1Thank You!p.2TMp.2Table of Contentsp.3Getting Started 2p.3Button Layout 3p.3Basic Setup 5p.3Pre-Programmed Method 5p.3Learning Method 9p.3Volume Control Punch Through 12p.3Advanced Operation 14p.3Advanced Setup 16p.3Editing Button Labels 16p.3Macro Button Setup 19p.3Favorite Channel Setup 21p.3Hiding and Adding Pages 23p.3Erasing 25p.3Cloning One Osiris to Another 26p.3Recalling Pre-Programmed Settings 27p.3Utilizing Optional RF Base Stations 28p.3IR/RF Signal Setting 31p.3ID # - Setting Base Station Address 33p.3EMITT - Setting IR Emitter Outputs 34p.3BLAST - Setting the Front Panel Blaster On or Off 35p.3Pre-Programmed Code Tables 37p.3Frequently Asked Questions 53p.3Warranty 54p.3Specifications 54p.3Memo 55p.3Getting Startedp.4Congratulations!p.4Battery Installationp.4Button Layoutp.5Selecting a New DEVICE Changes All Button Commands Instantlyp.6Light Buttonp.6Basic Setupp.7Pre-Programmed Methodp.7MAIN Button ENT Buttonp.7SELECTp.8Use the number buttons top.9enter thep.9Scan Up to the next Code Numberp.10Scan Down to the previous Code Numberp.10Code Numberp.10You Enteredp.10SAVE Buttonp.10MAIN Buttonp.10Learning Methodp.11LEARNp.11Buttonp.11Volume Control Punch Throughp.14Advanced Operationp.16Setting Backlight Optionsp.16The FAV Buttonp.16FAV Buttonp.16Favorite Channelp.16Buttonsp.16Adjusting Contrastp.17Transmitting (Busy Signal) Iconp.17Advanced Setupp.18Editing Button Labelsp.18EDIT Buttonp.18TEXT Buttonp.18Blinking Characterp.19LEFT Cursorp.19RIGHT Cursorp.19button moves blinkingp.19DOWN Cursor button deletes the currentlyp.19Edit the MAIN Menu Title or a MAIN Menu Device Labelp.20Macro Button Setupp.21SAVE —p.22UNDO —p.22EXIT —p.22Favorite Channel Setupp.23Hiding and Adding Pagesp.25PAGE Buttonp.25DEVICEp.26Erasingp.27Erasing Learned Buttons, Macros or Favsp.27
Page 1 of the Universal Remote Control MX-3500 user manual — Owner’s
Page 1 · click to enlarge
Page 1
Universal Remote Control MX-3500 — Owner’s diagram (page 1)
Fig. 1 · Owner’s
Universal Remote Control MX-3500 — Owner’s diagram (page 1)
Fig. 2 · Owner’s

Owner’s

Manual

Page 2 of the Universal Remote Control MX-3500 user manual — TM
Page 2 · click to enlarge
Page 2

Thank You!

Thank you for purchasing the Osiris Pre-Programmed and Learning Remote Control. This manual is designed to assist you step-by-step as you setup the Osiris to replace all of your remote controls and automate your home entertainment system.

TM

Osiris Owner’s Manual © 2004 Universal Remote Control, Inc.

The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CON- TROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMIS- SIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice. Osiris is a registered trademark of Universal Remote Control, Inc. Power of Simple is a trademark of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.

500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532

Page 3 of the Universal Remote Control MX-3500 user manual — Table of Contents
Page 3 · Contents
Contents

Contents

Owner’sp.1Manualp.1Thank You!p.2TMp.2Table of Contentsp.3Getting Started 2p.3Button Layout 3p.3Basic Setup 5p.3Pre-Programmed Method 5p.3Learning Method 9p.3Volume Control Punch Through 12p.3Advanced Operation 14p.3Advanced Setup 16p.3Editing Button Labels 16p.3Macro Button Setup 19p.3Favorite Channel Setup 21p.3Hiding and Adding Pages 23p.3Erasing 25p.3Cloning One Osiris to Another 26p.3Recalling Pre-Programmed Settings 27p.3Utilizing Optional RF Base Stations 28p.3IR/RF Signal Setting 31p.3ID # - Setting Base Station Address 33p.3EMITT - Setting IR Emitter Outputs 34p.3BLAST - Setting the Front Panel Blaster On or Off 35p.3Pre-Programmed Code Tables 37p.3Frequently Asked Questions 53p.3Warranty 54p.3Specifications 54p.3Memo 55p.3Getting Startedp.4Congratulations!p.4Battery Installationp.4Button Layoutp.5Selecting a New DEVICE Changes All Button Commands Instantlyp.6Light Buttonp.6Basic Setupp.7Pre-Programmed Methodp.7MAIN Button ENT Buttonp.7SELECTp.8Use the number buttons top.9enter thep.9Scan Up to the next Code Numberp.10Scan Down to the previous Code Numberp.10Code Numberp.10You Enteredp.10SAVE Buttonp.10MAIN Buttonp.10Learning Methodp.11LEARNp.11Buttonp.11Volume Control Punch Throughp.14Advanced Operationp.16Setting Backlight Optionsp.16The FAV Buttonp.16FAV Buttonp.16Favorite Channelp.16Buttonsp.16Adjusting Contrastp.17Transmitting (Busy Signal) Iconp.17Advanced Setupp.18Editing Button Labelsp.18EDIT Buttonp.18TEXT Buttonp.18Blinking Characterp.19LEFT Cursorp.19RIGHT Cursorp.19button moves blinkingp.19DOWN Cursor button deletes the currentlyp.19Edit the MAIN Menu Title or a MAIN Menu Device Labelp.20Macro Button Setupp.21SAVE —p.22UNDO —p.22EXIT —p.22Favorite Channel Setupp.23Hiding and Adding Pagesp.25PAGE Buttonp.25DEVICEp.26Erasingp.27Erasing Learned Buttons, Macros or Favsp.27
Page 4 of the Universal Remote Control MX-3500 user manual — +
Page 4 · click to enlarge
Page 4
Universal Remote Control MX-3500 — Getting Started diagram (page 4)
Fig. 3 · Getting Started

Getting Started

Congratulations!

You’ve purchased one of the most advanced and easy to setup control sys- tems available. The Osiris’s built-in library includes thousands of different brands and models of remote controls. In most systems, all you have to do to setup the Osiris is enter which brands and models you own. If you own a component too new to be in the library, the Osiris uses advanced learn- ing technology to quickly set each Osiris button, one at at time. Setting up your Osiris to replace all your existing remote controls can be done in a few minutes. Basic Setup is described on pages 5 to 13.

The Osiris’s exciting advanced features automate and customize operation in many ways. You could use Macro Setup to power on all of your compo- nents and start the show with the press of one button! With the Osiris’s unique Favorite Channel capability, you can tune in a channel with the press of one button instead of entering the entire channel number. Any of the button names on the display can be edited as you like. It is best to delay any Advanced Setup (described on pages 14 to 36) until after you finish Basic Setup.

Battery Installation

Remove the battery compartment cover by pressing up the cover lock. Insert four AAA batteries into the battery compartment as shown in the diagram.

+

+

+

+

Page 5 of the Universal Remote Control MX-3500 user manual — Button Layout
Page 5 · click to enlarge
Page 5

Button Layout

Universal Remote Control MX-3500 — Button Layout diagram (page 5)
Fig. 4 · Button Layout

*Note: When a command, macro or favorite channel is being transmitted, an icon will appear in the top right corner of the display. While the Osiris is “busy”, it will ignore a button push.

Page 6 of the Universal Remote Control MX-3500 user manual — Light Button
Page 6 · click to enlarge
Page 6

Selecting a New DEVICE Changes All Button Commands Instantly

The Osiris can operate ten different devices even though it is only one remote control. Let’s try it now! Press the MAIN button, then press the TV DEVICE button.

Universal Remote Control MX-3500 — Selecting a New DEVICE Changes All Button Commands Instantly diagram (page 6)
Fig. 5 · Selecting a New DEVICE Changes All Button Commands I…

The top of the screen changes from MAIN to TV. Now all of the buttons change their function to operate a TV. Press the page buttons. Watch the labels of the display buttons change with each press. There are five pages of display buttons already labeled for TV operation. To operate another component (e.g., VCR, DVD etc.), press the MAIN button to return to the MAIN menu. The MAIN menu displays five of your Devices on the screen. Simply press one of the screen-labeled Device buttons to operate another device. If you don’t see the device name you want, then use the PAGE buttons to display the remaining five devices on page 2 of the MAIN menu.

Light Button

Press the LIGHT button to backlight all the buttons. To turn off the back- lighting, press the LIGHT button again, or just wait ten seconds (the back- lighting automatically shuts itself off).

Universal Remote Control MX-3500 — Light Button diagram (page 6)
Fig. 6 · Light Button
Page 7 of the Universal Remote Control MX-3500 user manual — MAIN Button ENT Button
Page 7 · click to enlarge
Page 7

Basic Setup

You can start setting up your Osiris using either the Pre-Programmed Method or the Learning Method. However, all the buttons of the Osiris are setup at once with the Pre-Programmed Method, so it is usually faster than the one-button-at-a-time Learning Method.

Pre-Programmed Method

Power on the A/V component you wish to setup, so that you can test codes by sending power off commands.

Refer to the pre-programmed code tables on pages 37 - 51 and write down the code numbers listed for your A/V component. The code numbers are listed by categories of devices, then by brand. See page 37 for a category list.

Press and hold both the MAIN and ENT (Enter) buttons for approxi- mately three seconds. The top of the display will show “SETUP”. You are in SETUP mode now.

Universal Remote Control MX-3500 — Pre-Programmed Method diagram (page 7)
Fig. 7 · Pre-Programmed Method

MAIN Button ENT Button

Page 8 of the Universal Remote Control MX-3500 user manual — SELECT
Page 8 · click to enlarge
Page 8

Press the P-PRO button to select the Pre-Programmed Method.

Universal Remote Control MX-3500 — SELECT diagram (page 8)
Fig. 8

The display changes so that you can select which Device button to setup.

Universal Remote Control MX-3500 — SELECT diagram (page 8)
Fig. 9

Press a Page button to display the other five Device names.

In this step you choose the name of the device you’d like to setup. Use the cursor UP or DOWN buttons to change the flashing name. When it is correct, press the SELECT button.

Universal Remote Control MX-3500 — SELECT diagram (page 8)
Fig. 10

SELECT

For Example: I wanted to setup the TV Device button first, so I pressed the cursor UP or DOWN until “TV” was flashing in the display.

The bottom of the display will flash “FROM TABLE”.

Page 9 of the Universal Remote Control MX-3500 user manual — Use the number buttons to
Page 9 · click to enlarge
Page 9

In this step you verify the type of component you plan to operate with this device button. If the flashing name is correct, press SELECT.

Universal Remote Control MX-3500 — Use the number buttons to diagram (page 9)
Fig. 11 · Use the number buttons to

SELECT

If the name flashing in the display is incorrect (for example, you are setting up AUX to operate a Laser Disc Player), use the UP and DOWN buttons to change the flashing name to the correct type of component.

Point the Osiris at the component, then enter the first three digit code number from your notes using the numbered buttons. After you enter each three digit number, look at the component to see if it turned off.

Universal Remote Control MX-3500 — SELECT diagram (page 9)
Fig. 12

Use the number buttons to

enter the

code number.

Continue to enter code numbers until the component powers off.

For Example: I have a Sony TV. I found the code numbers 070, 139,147, 126, 185, 194 and 085 under Sony in the TV TABLE. Using the numbered buttons on the Osiris, I entered 070 and looked at the TV. It didn’t turn off, so I entered 139, then 147 and so on, until I found the code that powered off the TV.

Page 10 of the Universal Remote Control MX-3500 user manual — MAIN Button
Page 10 · click to enlarge
Page 10

Note: If a component fails to turn off after you have entered all of the code numbers listed for your brand, you can scan through the other brands in the table using the UP and DOWN buttons to change the code number displayed, then tapping either the Power On or Power Off buttons to see if the compo- nent powers on or off (there is a chance that your component was actually manufactured by another brand). However, most of the code tables are so large it is usually faster to use the Learning Method on Page 9.

Universal Remote Control MX-3500 — Scan Up to the next Code Number diagram (page 10)
Fig. 13 · Scan Up to the next Code Number

Scan Up to the next Code Number

Scan Down to the previous Code Number

Press Power On or Power Off to test if the device powers off.

When the component turns off, save the code number you entered by pressing the SAVE button that appears on the screen.

Code Number

Universal Remote Control MX-3500 — Code Number diagram (page 10)
Fig. 14 · Code Number

You Entered

SAVE Button

Exit SETUP mode by pressing the MAIN button two times. When the display shows “MAIN”, you are back in normal operating mode.

Universal Remote Control MX-3500 — You Entered diagram (page 10)
Fig. 15 · You Entered

MAIN Button

Page 11 of the Universal Remote Control MX-3500 user manual — LEARN
Page 11 · click to enlarge
Page 11

Repeat steps one through nine for each of your devices. If you are missing any commands, use the learning method, described next

Learning Method

The Osiris can learn commands from your old remote controls one-but- ton-at-a-time by following these simple steps:

Line-up the Osiris with your old remote control, head-to-head, one or two inches apart.

Universal Remote Control MX-3500 — Learning Method diagram (page 11)
Fig. 16 · Learning Method

On the Osiris, press and hold the MAIN and ENT (Enter) buttons at the same time for approximately three seconds. The top of the dis- play will show “SETUP”. You are in SETUP mode now.

Press the LEARN button.

Universal Remote Control MX-3500 — Learning Method diagram (page 11)
Fig. 17 · Learning Method

LEARN

Button

The top of the screen will change to “LEARN”.

Universal Remote Control MX-3500 — LEARN diagram (page 11)
Fig. 18
Page 12 of the Universal Remote Control MX-3500 user manual — Learning Method
Page 12 · click to enlarge
Page 12

The display will show a list of the first five devices.

Select the device you would like to teach commands to by pressing the Device button.

Universal Remote Control MX-3500 — Learning Method diagram (page 12)
Fig. 19 · Learning Method

Now, press any button you want to teach a command to.

Universal Remote Control MX-3500 — Learning Method diagram (page 12)
Fig. 20 · Learning Method
Universal Remote Control MX-3500 — Learning Method diagram (page 12)
Fig. 21 · Learning Method

Once you press a button, the top of the display will change from “LEARN” to “READY”.

Universal Remote Control MX-3500 — Learning Method diagram (page 12)
Fig. 22 · Learning Method
Page 13 of the Universal Remote Control MX-3500 user manual — Learning Method
Page 13 · click to enlarge
Page 13

Press and hold the button you want on your old remote control until the display changes to either “GOOD” or “FAILED”.

If the “GOOD” label appears on top of the display, you were successful. Now, press the next button you wish to teach. Keep repeating steps 6 through 7 until you have learned all the buttons you want.

Universal Remote Control MX-3500 — Learning Method diagram (page 13)
Fig. 23 · Learning Method

If the “FAILED” label appears on top of the display, try to teach the same button in Osiris once again by repeating steps 6-7.

Continue to teach any commands from any of your remote controls by repeating steps 5-7 (to go back to step five, press MAIN once).

Once you completed teaching all the buttons, return to normal opera- tion by pressing the MAIN button twice. Test all your new commands. If any of them don’t work, try learning again using these notes:

Move to another room. Plasma TVs, sunlight, halogen or quartz lighting can interfere with the learning process.

Although the old remote control seems to work fine, change the batteries to fresh alkaline batteries.

Vary the distance between the remote controls gradually. Try 1/4”, 1”, 2”and so on, up to 4 feet.

Tap the button on the original remote control instead of pressing and holding it during the learning process.

Page 14 of the Universal Remote Control MX-3500 user manual — Volume Control Punch Through
Page 14 · click to enlarge
Page 14

Volume Control Punch Through

In most home entertainment systems, the sound volume is only con- trolled by one device. In some systems, it is the TV speakers that make the sound, so you would use the TV device on the Osiris to raise and lower the volume. In another system, it might be a surround sound receiver and speakers that control the sound, so you would use the Osiris’s AUDIO device to adjust the volume. Constantly switching the Osiris to TV or AUDIO to adjust the volume is inconvenient in daily life.

You can use Punch Through to set the Osiris’s volume buttons to always control the sound in your system. That way when the Osiris is set to VCR or DVD, the volume up, down and mute buttons will work perfect- ly without switching back to AUDIO or TV. Here’s how:

Enter Setup mode by pressing and holding both MAIN and ENT for three seconds. The top of the display show you are in SETUP mode now.

Press the PAGE UP button to get to page 2 of the SETUP menu. Press the PUNCH button.

Press the VOL button. The display confirms by displaying “VOL” at the top of the screen. This sets up the group of three buttons (Volume Up, Volume Down and Mute) in one action!

Universal Remote Control MX-3500 — Volume Control Punch Through diagram (page 14)
Fig. 24 · Volume Control Punch Through

The bottom of the display flashes ”PUNCH TO”.

Page 15 of the Universal Remote Control MX-3500 user manual — Volume Control Punch Through
Page 15 · click to enlarge
Page 15

Press the device button for the device that doesn’t have volume control commands yet (i.e.,DVD). This is the device you are going to PUNCH TO for the volume and mute commands.

Universal Remote Control MX-3500 — Volume Control Punch Through diagram (page 15)
Fig. 25 · Volume Control Punch Through

The bottom of the display will then flash “PUNCH FROM”. Now you select the device that has the volume commands you want (i.e.,TV for systems using the TV speakers, AUDIO for systems with surround sound receivers). The bottom of the display will flash “SAVED”.

Repeat steps 3-5 until all your devices operate the volume perfect- ly. Press the MAIN button twice to return to normal operating mode and test your Punch Through settings.

VOL - Volume Up, Volume Down and Mute CH - Channel Up, Channel Down and Prev. Channel PLAY - Play, Stop, Pause, Rewind and Fast Forward VOD - Guide, Menu, Info, Exit, Up, Down, Left, Right, Sel POWER - Power On and Power Off

Page 16 of the Universal Remote Control MX-3500 user manual — Favorite Channel
Page 16 · click to enlarge
Page 16

Advanced Operation

Setting Backlight Options

You can adjust the amount of time that the Osiris backlight stays on by entering the SETUP mode and proceeding to page two (using the PAGE UP button), then pressing the LIGHT button on the display (not the Backlight button). Then enter the amount of time you would like the light to stay on using the number pad (0-99 seconds). After making your selection, press the SAVE button.

If you don’t want backlighting at all (this extends battery life), press the ON button that appears on the screen. The ON will change to OFF. Press the SAVE button. Exit the setup mode by pressing the MAIN button.

The FAV Button

When you press the FAV button, the display changes to a list of your favorite TV channels. Each button can be set to instantly select the channel on your TV. There are eight pages of five favorite channel buttons for a total of 40. Simply touch the PAGE buttons to display the other favorite chan- nels. To return to the last device you viewed, press MAIN once (a second press will take you to the MAIN menu).

FAV Button

Universal Remote Control MX-3500 — FAV Button diagram (page 16)
Fig. 26 · FAV Button

Favorite Channel

Buttons

To setup your Favorite Channel buttons go to page 21.

Page 17 of the Universal Remote Control MX-3500 user manual — Transmitting (Busy Signal) Icon
Page 17 · click to enlarge
Page 17

Adjusting Contrast

You can make the text darker by pressing both the MAIN and cursor UP buttons at the same time. To make the text appear lighter, press both the MAIN and cursor DOWN buttons at the same time.

Universal Remote Control MX-3500 — Adjusting Contrast diagram (page 17)
Fig. 27 · Adjusting Contrast

Transmitting (Busy Signal) Icon

When a command is being transmitted, an icon will appear in the top right corner of the display. It is a useful aid when setting up Macros and FAVs, since it flashes with every step of a sequence of commands.

Page 18 of the Universal Remote Control MX-3500 user manual — TEXT Button
Page 18 · click to enlarge
Page 18

Advanced Setup

After you’ve finished all your basic setup, you can choose to make opera- tion easier by customizing the Osiris just the way you want, using the Advanced Setup features described in this section.

Editing Button Labels

You can change the name of any of the display buttons (including Favorite Channels) by following these steps:

Press and hold both the MAIN and ENT (Enter) buttons for approx- imately three seconds. The top of the display will show “SETUP”. You are in SETUP mode now.

Press the EDIT button.

Universal Remote Control MX-3500 — Editing Button Labels diagram (page 18)
Fig. 28 · Editing Button Labels

EDIT Button

The display changes to the EDIT menu. Press the TEXT button.

Universal Remote Control MX-3500 — EDIT Button diagram (page 18)
Fig. 29 · EDIT Button

TEXT Button

The screen displays the list of devices and “EDIT” will appear at the top of the screen. Navigate to the device and page where there is a button label you want to EDIT, selecting between the FAV, MAIN, DEVICE, then using the PAGE button.

Page 19 of the Universal Remote Control MX-3500 user manual — DOWN Cursor button deletes the currently
Page 19 · click to enlarge
Page 19

Press the button you wish to edit. The first character of your button label blinks. 5

Universal Remote Control MX-3500 — Blinking Character diagram (page 19)
Fig. 30 · Blinking Character

Blinking Character

EDIT flashes at the bottom of the screen.

Universal Remote Control MX-3500 — Blinking Character diagram (page 19)
Fig. 31 · Blinking Character

Change the character by using any of the number keys. Each press of the same number button selects the next character of that number’s group, as shown here.

Universal Remote Control MX-3500 — Blinking Character diagram (page 19)
Fig. 32 · Blinking Character

Once the character you want appears, move to the next space by pressing the RIGHT cursor button.

UP Cursor button deletes ALL text.

LEFT Cursor

Universal Remote Control MX-3500 — LEFT Cursor diagram (page 19)
Fig. 33 · LEFT Cursor

RIGHT Cursor

button moves blinking

button moves blinking character right.

character left.

DOWN Cursor button deletes the currently

blinking character.

Page 20 of the Universal Remote Control MX-3500 user manual — Edit the MAIN Menu Title or a MAIN Menu Device Label
Page 20 · click to enlarge
Page 20

When you are finished editing the button, press the button you edited and “SAVED” will flash at the bottom of the display.

To change any other button labels on the same device, press the next button, then repeat steps 6-8. If you wish to edit a button on another device, press the MAIN button once, then repeat Steps 4-8.

Once you’ve finished editing buttons, press the MAIN button four times to return to normal operation.

Edit the MAIN Menu Title or a MAIN Menu Device Label

You can change the title of the MAIN Menu or a MAIN Menu device label by following these steps after you’ve entered TEXT Edit mode (described in the steps one through four in the preceding pages).

Once you’ve entered TEXT Edit mode, the top of the screen displays EDIT and the first five devices of the MAIN Menu. There are five pages you can access via the Page UP or DOWN buttons. When the top of the screen says EDIT, pressing a device button jumps to the pages for that device so that you can edit a device’s LCD buttons normally. However, if you continue to tap the Page button, the top of the screen will change from EDIT to MAIN. While it says MAIN, there are three pages of LCD but- tons. The first two list the Devices of the MAIN Menu and enable you to change the device names when pressed. The third page titled MAIN has only one entry for the LCD buttons; “MAIN”. When you press the corresponding hard button, you can relable the MAIN title itself.

Select the title to edit by pressing the adjacent hard button.

Edit the text (described on steps 5 and 6 on page 17).

Press the button you edited to save the changes. Here’s an example:

The MAIN Menu title has been changed to PATIO, so whenever the MAIN button is pressed, the user is reminded that this is the Patio remote.

Universal Remote Control MX-3500 — Edit the MAIN Menu Title or a MAIN Menu Device Label diagram (page 20)
Fig. 34 · Edit the MAIN Menu Title or a MAIN Menu Device Label

Each of the MAIN menu device but- tons has been cus- tom labeled for the activities the user likes to use out on the Patio.

Page 21 of the Universal Remote Control MX-3500 user manual — Macro Button Setup
Page 21 · click to enlarge
Page 21

Macro Button Setup

Imagine turning on your TV, your DVD player and your surround sound receiver by pressing a single button on your Osiris! What would nor- mally take three remotes and three button pushes, the Osiris can accomplish with the press of one button. We call that a “Macro”. Any of the Display buttons, the Power On or the Power Off buttons (on any Device or Page) can be set to be Macro buttons!

To setup a macro button, follow these easy steps:

Enter the SETUP mode by pressing and holding both MAIN and ENT for three seconds.

Press the MACRO button. The top of the display will show “MACRO”. The bottom of the display will flash “SELECT”.

Navigate to the Device and Page where there is a button you would like to set as a Macro button using the MAIN, DEVICE, and PAGE but- tons.

Advanced Options: If you wish to set one of the DEVICE buttons as a macro, on step 3, press the Page Up button twice. The top of the display changes to MAIN, and you can navigate to MAIN page 1 or page 2 before going on to Step 4.

Another option for DEVICE button macros is to only send the macro if the but- ton is pressed and held. This is setup by entering a delay as the first step of the macro. The amount of delay determines how long the user must press the but- ton before the macro is sent. The advantage of this option is that a normal press of the DEVICE button will simply switch devices without issuing the macro.

Press the button you want to set as a Macro button. The top of the screen will display the label of the button you selected. At the bot- tom of the screen it displays “STEP0”, indicating that no macro steps have been entered yet.

Page 22 of the Universal Remote Control MX-3500 user manual — EXIT —
Page 22 · click to enlarge
Page 22

Navigate to the Device and Page that has a button you want in your macro using the MAIN, DEVICE and PAGE buttons. Then press the button with the command you want. Whenever a button is pressed, another Macro step is counted and displayed at the bottom of the screen.

Don’t worry about the number of steps. Each macro button can store up to 190 steps, so you are not likely to run out of steps!

Press the LIGHT button to end your macro. A new screen displays three choices:

Universal Remote Control MX-3500 — SAVE — diagram (page 22)
Fig. 35

SAVE Button

If you are happy with your macro, press the SAVE button.

SAVE —

UNDO —

The UNDO button lets you erase the last step.

EXIT —

The EXIT button erases all the macro steps.

Press the MAIN button twice to return to normal operation.

Page 23 of the Universal Remote Control MX-3500 user manual — FAV Button
Page 23 · click to enlarge
Page 23

Favorite Channel Setup

Imagine surfing all your favorite channels, without ever typing in a channel number. By simply setting up each of the favorite channel but- tons, you can make TV, cable or satellite operation fun and easy. To setup a Favorite Channel button, follow these steps:

Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds.

Press the FAV display button.

Universal Remote Control MX-3500 — Favorite Channel Setup diagram (page 23)
Fig. 36 · Favorite Channel Setup

FAV Button

The top of the display will show “FAV”. The bottom of the display will flash “SELECT”.

Use the Page buttons until you can see the name (i.e., ABC, CBS, NBC) of the favorite channel you wish to setup.

Press the favorite channel button you wish to setup. The top of the screen changes to show the channel name. The bottom of the screen displays “STEP0”, indicating that you have not entered the channel number yet.

Press either the TV, SAT or CABLE Device button (select the device you use to enter channel numbers).

Press each of the number buttons for the channel.

Page 24 of the Universal Remote Control MX-3500 user manual — SAVE Button
Page 24 · click to enlarge
Page 24
Universal Remote Control MX-3500 — Favorite Channel Setup diagram (page 24)
Fig. 37 · Favorite Channel Setup

Use the PAUSE Button to set delays between steps, each press of the pause button increases the delay by a half second.

Universal Remote Control MX-3500 — Favorite Channel Setup diagram (page 24)
Fig. 38 · Favorite Channel Setup

Press the LIGHT button after you enter the channel number. A new screen appears:

SAVE Button

To save the channel you entered, press the SAVE button. The UNDO button lets you erase the last entry. The EXIT button erases all entries for this button.

When you are finished setting up Favorite Channel buttons, press the MAIN button twice to return to normal operation.

Page 25 of the Universal Remote Control MX-3500 user manual — PAGE Button
Page 25 · click to enlarge
Page 25

Hiding and Adding Pages

Each of your Osiris Devices actually contains eight pages. However, only five pages are visible in the factory default setting. Three pages are hid- den in each device. If you wish to use the hidden pages, you can ADD them. If you don’t want to use some of the existing pages, you can HIDE them. You can add or hide pages on devices OR on your favorite chan- nel pages using this simple process:

Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds.

Press the EDIT button.

Universal Remote Control MX-3500 — Hiding and Adding Pages diagram (page 25)
Fig. 39 · Hiding and Adding Pages

EDIT Button

Press the PAGE button.

Universal Remote Control MX-3500 — EDIT Button diagram (page 25)
Fig. 40 · EDIT Button

PAGE Button

“PAGE” appears at the top of the screen.

Page 26 of the Universal Remote Control MX-3500 user manual — FAV Button
Page 26 · click to enlarge
Page 26

Navigate to any page, using the MAIN, DEVICE, FAV, and PAGE but- tons.

Universal Remote Control MX-3500 — DEVICE diagram (page 26)
Fig. 41

FAV Button

DEVICE

When you select a page, the top of the screen indicates whether you want to “ADD?” or “HIDE?” the page dis- played. When you would like to change a page’s visibility, press the LIGHT button.

Universal Remote Control MX-3500 — FAV Button diagram (page 26)
Fig. 42 · FAV Button

This page is hidden. To ADD it, press the LIGHT button.

This page is visible. To HIDE it, press the LIGHT button.

You can continue to ADD or HIDE pages on other devices by repeat- ing Steps 4 and 5.

When you are finished adding and hiding pages, press the MAIN but- ton four times to return to normal operation.

Page 27 of the Universal Remote Control MX-3500 user manual — KEY—
Page 27 · click to enlarge
Page 27

Erasing

You can erase an individual button with a learned command, a macro or a favorite channel. You can erase an entire Device’s learned com- mand or macro buttons. You can also erase ALL your learned com- mands on all devices or all your macros or favorite channels every- where. If you really want a fresh start, it is possible to reset everything to the factory default condition.

Erasing Learned Buttons, Macros or Favs

Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds.

Press a PAGE button to display page two of Setup.

Press the ERASE button.

Press either the LEARN, MACRO or FAV button. The following screen appears:

Universal Remote Control MX-3500 — Erasing Learned Buttons, Macros or Favs diagram (page 27)
Fig. 43 · Erasing Learned Buttons, Macros or Favs

ALL —

If you press ALL, the Osiris displays a SURE? button. After the SURE button is pressed, all the buttons will be erased.

DEVICE—

If you press DEVICE, a list of Devices will appear. Press the device button that you wish to erase. The bottom of the screen will flash ERASE twice, then ERASED.

KEY—

If you press KEY, you’ll have to navigate to the Device and Page you want using the MAIN, DEVICE and PAGE buttons. Press a button to erase it. The bottom of the display will flash ERASE twice, then ERASED.

To return to normal operating mode, press the MAIN button four times.

Page 28 of the Universal Remote Control MX-3500 user manual — SURE Button
Page 28 · click to enlarge
Page 28

Erasing the Entire Osiris

To erase EVERYTHING, press and hold both the MAIN and the STOP buttons for 15 seconds. After 15 seconds, the RESET screen appears. Press the SURE button to erase all of your settings and return to the fac- tory default setup.

SURE Button

Cloning One Osiris to Another

If you own two or more Osiris, you can copy and transfer all the setup from one Osiris to another. Just follow these easy steps:

Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds.

Press a PAGE button to display page two of Setup.

Press the CLONE button.

Align the two Osiris head-to-head, about an inch apart.

Universal Remote Control MX-3500 — SURE Button diagram (page 28)
Fig. 44 · SURE Button
Universal Remote Control MX-3500 — SURE Button diagram (page 28)
Fig. 45 · SURE Button

Press the RECV display button on the new Osiris you would like to setup by cloning.

Press the SEND display button on the Osiris you previously setup.

Press the START button on the new Osiris and then press the START button on the Osiris you previously setup.

After completion, the cloned Osiris will flash “GOOD”.

Return to normal operation by pressing the MAIN button twice.

Page 29 of the Universal Remote Control MX-3500 user manual — Recalling Pre-Programmed Settings
Page 29 · click to enlarge
Page 29

Recalling Pre-Programmed Settings

If you didn’t write down the code numbers you setup your Osiris with, you can recall them via this simple process:

Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds.

Go to page two of the SETUP menu via the PAGE UP button.

Press the RECAL button. The display changes to the recall screens. The screen automatically switches between four screens, alternately flash- ing page one devices and code numbers then those for page two.

Universal Remote Control MX-3500 — Recalling Pre-Programmed Settings diagram (page 29)
Fig. 46 · Recalling Pre-Programmed Settings

Write down the code numbers as they appear.

Return to normal operation by pressing the MAIN button twice.

Page 30 of the Universal Remote Control MX-3500 user manual — Utilizing Optional RF Base Stations
Page 30 · click to enlarge
Page 30

Utilizing Optional RF Base Stations

You can use the Osiris as you would your other remote controls. It trans- mits very powerful line-of-sight output using infrared light commands (invisible to the naked eye). When you point the Osiris at the components, expect the range to be between 30 and 50 feet. When the remote is not pointed in the general direction of the components, the range will vary (depending on reflective surfaces, lighting, etc.).

However, the Osiris also sends radio signals in every direction. By pur- chasing the MRF-100 or the addressable MRF-250 or MRF-300 base sta- tions, you can operate your equipment with the Osiris 50 to 100 feet away (through walls, doors, cabinets, inside or outside). Since the RF Base Station picks up the Osiris's radio signals from any direction, regardless of distance, the Osiris doesn’t have to be pointed!

Using MRF-250 or MRF-300 Addressable Base Stations By installing an MRF-250 or MRF-300 base station you gain freedom from interference from a nearby room, house or condo where someone else might be using an RF remote control. Addressable base stations are assigned one of 15 unique ID#’s. This allows multiple equipment loca- tions in one house to be controlled by any Osiris. In operation it’s simple: when you select a device located in the Den, the Osiris only talks to the base station in the Den. When you select a device located in the Family Room, the Osiris only talks to it!

When used with an MRF-250 or MRF-300 base station, the Osiris can be programmed to control identical components, for example, a media room array of TV’s . The intelligent routing of the MRF-250 or the MRF-300 base station will send your commands only to the TV you want to control. The other identical TV’s will not receive commands. Of course, if your system utilizes identical satellite receivers, cable boxes, VCR’s or disc changers you can utilize IR routing just as easily for them. If you have more than six identical components, up to 15 addressable MRF-250’s or MRF-300’s can be installed to control them (thus allowing up to 90 identical components in one house).

Page 31 of the Universal Remote Control MX-3500 user manual — Erasing
Page 31 · click to enlarge
Page 31

The Osiris sends radio signal to the MRF-100, MRF-250 or the MRF-300 RF Base Stations.

Universal Remote Control MX-3500 — Erasing diagram (page 31)
Fig. 47 · Erasing

The RF Base Station converts radio signals to stan- dard infrared commands and sends them out via a built-in front blaster to components in the same cabinet space.

Universal Remote Control MX-3500 — Erasing diagram (page 31)
Fig. 48 · Erasing

Self-adhesive “flashers” (included with the MRF-250 or the MRF-300) affix to the front panels of your components. The flashers relay infrared commands to components out-of-sight of the front blaster. The flashers plug into the rear flasher line out- put jacks. Each flasher has a 10’ cable to easily reach compo- nents on nearby shelves.

Page 32 of the Universal Remote Control MX-3500 user manual — Changing the RF Settings
Page 32 · click to enlarge
Page 32

RF Settings Overview

The Osiris is factory set to work out of the box with an MRF-100 base sta- tion, which is not addressable. The only setting that affects operation with an MRF-100 is the RF/IR setting (to operate, the Osiris must be set to IR/RF or RF- it will not operate the MRF-100 in IR mode). The Osiris will operate with an MRF-250 or MRF-300 base station set to ID#0 with the factory default settings. However, in order to gain the advantages of addressable base stations (no interference between systems within one house or a condo development with potential interference between two different con- dos, turning the front blaster on or off, or routing identical commands to a stack of identical televisions or satellite receivers etc.) you must reset the Osiris and the Base Station ID# to any address other than ID#0. ID#0 is an “open door” to any RF signal, it is not a true address. It is extremely useful for testing whether any interference is present, since the base station’s STA- TUS LED will flicker if interference is present. Once the base station is moved to a location where the LED does not flicker, the ID# can be changed to one of the other addresses.

IR/RF (Type of Signal) - All devices are factory set to send both an IR line of

sight signal and an omnidirectional RF signal. ID# (Base Station Address) - All devices are factory set with ID #0. EMITT (IR Emitter Line Output) - All devices are factory set to output IR com-

mands through ALL IR Emitter Line Outputs. BLAST (Base Station Front Panel Blaster) - The blaster is factory set to be on.

Changing the RF Settings

Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds.

Press the PAGE buttons until page three of Setup is displayed (RF is the only choice on Page 3).

Page 33 of the Universal Remote Control MX-3500 user manual — IR/RF Signal Setting
Page 33 · click to enlarge
Page 33

Press the RF button.

Universal Remote Control MX-3500 — Erasing diagram (page 33)
Fig. 49 · Erasing

RF Button

The RF Settings Menu appears. See the notes on the following pages for more info on each option. Make your selection by press- ing the button you want:

Universal Remote Control MX-3500 — RF Button diagram (page 33)
Fig. 50 · RF Button
Universal Remote Control MX-3500 — RF Button diagram (page 33)
Fig. 51 · RF Button

After you’ve made a new setting and SAVED your change, use the EXIT button to return to the RF settings menu to change any other setting. Once you are finished all settings, use the MAIN button to return to normal operation

IR/RF Signal Setting

You can set the signal to be IR line-of-sight only, RF only or IR and RF simultaneously. Additionally, you can set the signal the same way for ALL ten of your devices OR you can set the signal differently for each device (the plasma TV could be set to be IR line-of-sight only, while the DVD player and the Satellite receiver are set to be RF only). A good reason to set the signal to RF only is to prevent too much IR being sent to a sensitive component from two arrivals at the front panel (one directly from the Osiris, one from the RF base station). A good reason to set the signal to IR only is that another room has an MRF-100 base station (no RF address) so it will receive commands from the Osiris unless it is set to IR only.

Page 34 of the Universal Remote Control MX-3500 user manual — Both IR and RF will be output Only IR line-of-sight
Page 34 · click to enlarge
Page 34
Universal Remote Control MX-3500 — Erasing diagram (page 34)
Fig. 52 · Erasing

Decide whether you are changing the Signal for all devices or just one of the devices of the Osiris.

Select ALL to change the signal settings to ALL devices in the Osiris. Then, go to Step 4.

Select DEVIC to change the signal settings to just one of the devices in the Osiris. Then, go to Step 3.

The display changes to a list of the names of your devices. If you have two pages of devices, pressing either of the page buttons will display the other page. Select the device you would like to change IR/RF set- tings, then go to Step 4.

Universal Remote Control MX-3500 — Erasing diagram (page 34)
Fig. 53 · Erasing

Select a device Page Buttons display the other page of devices.

Select the new setting by pressing the desired button, then press SAVE to save your new setting and return to the RF settings menu.

Universal Remote Control MX-3500 — Erasing diagram (page 34)
Fig. 54 · Erasing

Both IR and RF will be output Only IR line-of-sight

Save the new setting Exit this Menu without changing the IR/RF settings

Page 35 of the Universal Remote Control MX-3500 user manual — ID # - Setting Base Station Address
Page 35 · click to enlarge
Page 35

ID # - Setting Base Station Address

When you are installing a system within 100 feet of another equipment location in the same home OR near a home, condo, yacht or motor home that might potentially have an RF remote control of any kind, it is recommended that you use an addressable base station and set the address as described here.

You can operate up to 15 different equipment locations, each with an MRF-250 or MRF-300 assigned a unique Receiver ID#. You program each or all of your Osiris devices to the appropriate equipment location by assigning the corresponding ID# in the RF Settings Menus.

From the RF Settings Menu, select ID#.

Decide whether you are changing the ID# for all devices or just one of the devices of the Osiris.

Universal Remote Control MX-3500 — ID # - Setting Base Station Address diagram (page 35)
Fig. 55 · ID # - Setting Base Station Address

Select ALL to change the ID# for ALL devices in the Osiris. Then, go to Step 4.

Select DEVIC to change the ID# for just one of the devices in the Osiris. Then, go to Step 3.

The display changes to a list of the names of your devices. If you have two pages of devices, pressing either of the page buttons will display the other page. Select the device you would like to change the ID#, then go to Step 4.

Universal Remote Control MX-3500 — ID # - Setting Base Station Address diagram (page 35)
Fig. 56 · ID # - Setting Base Station Address

Select a device Page Buttons display the other page of devices.

Page 36 of the Universal Remote Control MX-3500 user manual — Change the ID# to a lower number Save the new setting
Page 36 · click to enlarge
Page 36

Select the new setting by pressing the desired button, then press SAVE to save your new setting and return to the RF settings menu.

Universal Remote Control MX-3500 — Erasing diagram (page 36)
Fig. 57 · Erasing

Change the ID# to a lower number Save the new setting

EMITT - Setting IR Emitter Outputs

The MRF-250 and MRF-300 Base Stations enable you to route or steer the IR commands from any Device to any or all of the IR Line Outputs. This allows you to control identical devices using the exact same IR commands (such as an array of television sets in a media room or a stack of identical satellite receivers installed in a central location with one satellite receiver dedicated to each room with a television). Each button push (or macro step) is rout- ed to the specific IR Line Output you’ve assigned to a device. In the factory set default settings, the Osiris is set to route IR com- mands from any device to ALL IR Line Outputs simultaneously. To change the Osiris default settings follow these steps:

Universal Remote Control MX-3500 — Change the ID# to a lower number Save the new setting diagram (page 36)
Fig. 58 · Change the ID# to a lower number Save the new settin…

Decide whether you are changing the Emitter settings for all devices or just one of the devices of the Osiris.

Select ALL to change the Emitter settings to ALL devices in the Osiris. Then, go to Step 4.

Select DEVIC to change the Emitter settings to just one of the devices in the Osiris. Then, go to Step 3.

Page 37 of the Universal Remote Control MX-3500 user manual — BLAST - Setting the Front Panel Blaster On or Off
Page 37 · click to enlarge
Page 37

The display changes to a list of the names of your devices. If you have two pages of devices, pressing either of the page buttons will display the other page. Select the device you would like to change the Emitter settings, then go to Step 4.

Universal Remote Control MX-3500 — Erasing diagram (page 37)
Fig. 59 · Erasing

Select a device Page Buttons display the other page of devices.

Select the new setting by pressing the desired button, then press SAVE to save your new setting and return to the RF settings menu.

Universal Remote Control MX-3500 — Erasing diagram (page 37)
Fig. 60 · Erasing

Change the Line Output downwards Save the new setting Exit this Menu without changing the EMITT settings

BLAST - Setting the Front Panel Blaster On or Off

The MRF-250 and MRF-300 Base Stations have a configurable front panel high power IR LED or “blaster” for controlling compo- nents in the same cabinet space without emitters attached to their front panel. The front panel blaster can overpower or saturate the sensors of some A/V components, so if intermittent operation occurs, the blaster should be turned off.

The blaster is incompatible with a stack of identical components, since all components will receive IR commands at once, no mat- ter what device is selected. Turn off the front panel blaster by fol- lowing the steps described on the next page:

Page 38 of the Universal Remote Control MX-3500 user manual — Save the new setting Exit this Menu without changing the BLAST settings
Page 38 · click to enlarge
Page 38
Universal Remote Control MX-3500 — Erasing diagram (page 38)
Fig. 61 · Erasing

Decide whether you are changing the Blaster for all devices or just one of the devices of the Osiris.

Select ALL to change the blaster settings to ALL devices in the Osiris. Then, go to Step 4.

Select DEVIC to change the blaster settings to just one of the devices in the Osiris. Then, go to Step 3.

The display changes to a list of the names of your devices. If you have two pages of devices, pressing either of the page buttons will display the other page. Select the device you would like to change IR/RF set- tings, then go to Step 4.

Universal Remote Control MX-3500 — Erasing diagram (page 38)
Fig. 62 · Erasing

Select a device Page Buttons display the other page of devices.

Select the new setting by pressing the desired button, then press SAVE to save your new setting and return to the RF settings menu.

Universal Remote Control MX-3500 — Erasing diagram (page 38)
Fig. 63 · Erasing

Save the new setting Exit this Menu without changing the BLAST settings

Page 39 of the Universal Remote Control MX-3500 user manual — AUX
Page 39 · click to enlarge
Page 39

Pre-Programmed Code Tables

The Osiris’s Pre-Programmed code library is divided into categories (TV, VCR, AUX, etc.). Each category actually includes many types of components. For example, the VCR category includes TV/VCR combo units.

Within each category, the code numbers are listed in rows by brand (Sony, Panasonic, B & K, etc.). Some brands have more than one three digit code for you to try. Just circle the correct row and refer to it while you setup (step-by-step instructions for using Pre-Programmed codes are found on page 5).

TV

TVs, Plasmas, Projectors and Monitors

CABLE

DVD

DVD Players, TV/DVD Combos, TV/DVD/VCR Combos, DVD Recorders, and Laser Disc Players

VCR

VCRs and TV/VCR Combos

AUDIO

Amps, Preamps and A/V Receivers

SAT

CD

CD Players and Changers

DVR

Digital Video Recorders (TiVo, Replay)

AUX

Tape Decks, Lighting Controls, Custom Installation Products

Show 11 more labels / short text on this page
Pages 38-40 · Cable TV Descramblers/Tuners · Pages 40-41 · Pages 42-44 · Pages 44-46 · Pages 46-48 · Satellite Receiver · Page 48-49 · Pages 49-50 · Page 51 · Pages 51-52
Page 40 of the Universal Remote Control MX-3500 user manual — BRAND CODE NUMBERS
Page 40 · click to enlarge
Page 40

TV - TVs, Plasmas, Projectors and Monitors

BRAND CODE NUMBERS

ADMIRAL 072 081 161 160 ADVENT 247 AKAI 197 146 248 A MARK 112 143 AMPRO 167 073 157 183 AMSTRAD 052 ANAM 043 054 056 080 112 131 AOC 197 004 112 058 APEX DIGITAL 006 AUDIOVOX 076 BARCO 233 BLAUPUNKT 088 BROKSONIC 238 CAIRN 201 CANDLE 197 002 003 004 CAPEHART 058 CETRONIC 043 CITIZEN 197 002 003 004 043 101 103 143 CLASSIC 043 CONCERTO 004 CONTEC 043 050 051 CORONADO 143 CRAIG 043 054 CROWN 043 143 CURTIS MATHES 197 101 004 143 CXC 043 DAEWOO 004 016 043 044 076 103 114 125 127 143 DAYTRON 004 143 DELL 319 320 321 DREAMVISION 235 DWIN 177 257 DYNASTY 043 DYNATECH 062 EIKI 187 ELECTROHOME 143 024 076 196 EMERSON 028 048 043 155 005 197 004 047 050 051 076 096 143 151 153 154 FISHER 007 057 FUJITSU 198 246 FUNAI 028 043 FUTURETECH 043 GATEWAY 242 268 GE 160 144 165 073 197 008 009 034 056 074 130 155 161 004 091 157 183 GOLDSTAR 113 116 102 004 106 112 119 127 143 HALL MARK 004 HITACHI 011 163 166 004 009 010 012 023 075 143 158 072 HP 316 INFINITY 164 INFOCUS 230 330 333 JBL 164 JCPENNEY 004 024 197 008 009 030 065 101 143 156 160 JENSEN 013 JVC 038 034 070 083 145 199 210 240 241 KEC 043 KENWOOD 197 070 KLOSS 002 059 KMC 143

Page 41 of the Universal Remote Control MX-3500 user manual — BRAND CODE NUMBERS
Page 41 · click to enlarge
Page 41

TV (continued) - TVs, Plasmas, Projectors and Monitors

BRAND CODE NUMBERS

KTV 043 197 143 154 LG 113 116 102 004 106 112 119 127 143 243 284 LODGENET 072 LOEWE 164 LOGIK 072 LUXMAN 004 LXI 166 007 015 052 081 160 164 MAGNAVOX 164 059 197 003 060 061 004 063 064 127 022 160 094 239 226 MARANTZ 197 164 184 MATSUI 164 MAXENT 242 MEMOREX 007 072 004 METZ 088 MGA 197 004 024 028 042 MINERVA 088 MITSUBISHI 109 124 024 004 028 040 042 146 191 MTC 197 004 062 101 NAD 015 025 NEC 132 130 134 197 040 016 024 056 019 236 237 262 272 NIKEI 043 ONKING 043 ONWA 043 OPTONICA 019 081 OPTOMA 265 270 ORION 096 PANASONIC 034 056 080 092 164 208 PHILCO 197 003 059 060 064 164 004 024 056 063 PHILIPS 164 005 093 038 197 003 004 059 127 184 206 239 259 PIONEER 135 025 197 018 023 116 190 234 PORTLAND 004 143 PROSCAN 144 160 161 165 167 PROTON 004 131 058 143 171 173 193 QUASAR 034 056 092 RADIO SHACK 019 004 143 043 127 RCA 160 165 065 156 144 161 197 004 024 056 152 023 074 333 REALISTIC 007 019 043 047 ROCTEC 186 RUNCO 168 169 178 179 180 181 182 183 073 157 SAMPO 197 058 004 202 SAMSUNG 050 089 101 105 004 127 143 160 228 229 258 SANYO 166 007 020 053 057 082 187 SCEPTRE 276 SCOTT 028 043 004 048 143 SEARS 015 030 004 007 028 057 143 094 160 082 165 166 SELECO 189 200 205 227 SHARP 081 019 014 170 028 029 004 022 143 175 251 SIEMENS 088 SIGNATURE 072 SOLE 231 232 SONY 070 139 147 126 185 194 085 213 277 279 SOUNDESIGN 028 004 003 043 SPECTRICON 112 SSS 004 043 SUPRE MACY 002 SYLVANIA 197 003 059 060 063 064 164 044 160 127 TANDY 081

Page 42 of the Universal Remote Control MX-3500 user manual — BRAND CODE NUMBERS
Page 42 · click to enlarge
Page 42

TV (continued) - TVs, Plasmas, Projectors and Monitors

BRAND CODE NUMBERS

TATUNG 056 062 TECHNICS 034 080 TECHWOOD 004 TEKNIKA 002 003 004 024 028 043 072 101 143 TELEFUNKEN 037 046 086 087 TELERENT 072 TERA 172 TMK 004 TOSHIBA 015 138 030 007 040 062 101 TOTEVISION 143 UNIVERSAL 008 009 VIDEO CONCEPTS 146 VIDIKRON 174 184 188 192 VIDTECH 004 VIEWSONIC 242 WARDS 004 008 009 019 028 060 061 063 064 072 074 143 164 034 WESTING HOUSE 076 280 YAMAHA 197 004 YORK 004 YUPITERU 043 ZENITH 073 072 095 103 157 183 243 284 ZONDA 112

CABLE - Cable Set Top Boxes

BRAND CODE NUMBERS

ABC 004 103 003 039 042 046 053 ADELPHIA 043 074 ADVANCED NEWHOUSE 043 ALTRIO 043 AMERICAST 099 ARCHER 005 007 014 ARMSTONG 074 AT&T BROADBAND 074 ATLANTIC BROADBAND 043 074 BELL SOUTH 099 BLUE RIDGE 043 074 BRESNAN 074 BRIGHT HOUSE 043 BUCKEYE COMM 074 CABLEVISION 043 074 108 CENTURION 092 CENTURY 007 CHARTER 043 074 CITIZEN 007 COGECO 074 COMBANO 080 081 COMCAST 043 074 110 COMSAT 074 COX DIGITAL 043 074 DIGICABLE 101 EAGLE 020 030 040 EASTERN 057 066

Page 43 of the Universal Remote Control MX-3500 user manual — BRAND CODE NUMBERS
Page 43 · click to enlarge
Page 43

CABLE (continued) - Cable Set Top Boxes

BRAND CODE NUMBERS

ECHOSTAR 106 ELECTRICORD 032 GEMINI 008 054 GENERAL ELECTRIC 072 GENERAL INSTRUMENT 074 103 104 GNC 099 GOLDEN CHANNEL 030 HAMLIN 049 050 055 HITACHI 103 055 INSIGHT 074 JERROLD 074 004 103 002 003 008 009 010 069 MAGNAVOX 010 012 064 079 095 094 MASSILLON 074 MEDIA ONE 107 MEDICOM 074 MEMOREX 052 MITSUBISHI 102 MOTOROLA 074 110 109 MOVIE TIME 028 032 MOXI 111 NCTC 074 NSC 015 028 038 071 OAK 031 037 053 PACE 043 074 PANASONIC 044 047 PARAGON 052 PHILIPS 006 012 013 020 085 095 PIONEER 043 103 034 051 063 076 105 PRUCER 059 PULSAR 052 RCA 047 RCN 074 RECOTON 098 REGAL 049 050 REGENCY 057 RODGERS 043 SAMSUNG 030 SCIENTIFIC ATLANTA 043 011 003 041 042 045 046 SEREN 043 SERVICE ELECTRIC 074 SHAW 074 SIGECOM 043 SONY 096 108 SPRUCER 047 078 STARCOM 002 004 008 009 STARGATE 008 030 097 104 SUSQUEHANNA 043 074 TIME WARNER 043 074 TOCOM 039 040 056 TOSHIBA 052 UNITED CABLE 004 053 UNIVERSAL 005 007 014 032 035 VIDEOTRON 043 VIEWSTAR 012 015 018 086 087 088 089 WIDE OPEN WEST 043 099 ZENITH 052 060 093 100

Page 44 of the Universal Remote Control MX-3500 user manual — BRAND CODE NUMBERS
Page 44 · click to enlarge
Page 44

DVD-DVD Players

BRAND CODE NUMBERS

AIWA 146 ALPINE 098 APEX DIGITAL 087 111 115 DENON 007 080 173 FUNAI 143 GE 026 027 GO VIDEO 137 HARMAN KARDON 084 140 HITACHI 101 INTEGRA 142 180 JVC 012 KENWOOD 151 KLH 135 KRELL 104 LEXICON 148 LG 091 057 074 MAGNAVOX 066 096 MARANTZ 083 095 MERIDIAN 153 MITSUBISHI 017 MYRYAD 102 134 NAD 088 NAKAMICHI 103 ONKYO 076 035 180 PANASONIC 021 042 138 139 144 150 PHILIPS 066 083 095 105 166 PIONEER 023 092 099 107 108 131 PROCEED 086 PROSCAN 026 027 RCA 026 027 SAMSUNG 056 070 119 165 170 137 159 SANSUI 154 SANYO 147 SHARP 094 SONY 033 118 145 126 191 SYLVANIA 143 SYMPHONIC 143 TATUNG 102 THOMPSON 026 027 TOSHIBA 035 034 130 141 164 188 VENTURER 149 YAMAHA 042 089 166 195 197 ZENITH 057 074 091

DVD-TV/DVD Combos

BRAND CODE NUMBERS

AIWA 146 FUNAI 143 SAMSUNG 165 SYLVANIA 143 SYMPHONIC 143 TOSHIBA 130

Page 45 of the Universal Remote Control MX-3500 user manual — BRAND CODE NUMBERS
Page 45 · click to enlarge
Page 45

DVD-TV/DVD/VCR Combos

BRAND CODE NUMBERS

MAGNAVOX 143 PANASONIC 144 SYLVANIA 143 TOSHIBA 164

DVD-DVD/VCR Combos

BRAND CODE NUMBERS

GO VIDEO 137 PANASONIC 150 PHILIPS 105 (VCR Functions for VCR 067) SAMSUNG 137 159 SANSUI 154 SONY 145 191 TOSHIBA 141 ZENITH 091 (VCR Functions for VCR171)

DVD-DVD Recorders

BRAND CODE NUMBERS

PANASONIC 139 SONY 191 TOSHIBA 188

DVD-Laser Disc Players

BRAND CODE NUMBERS

DENON 206 207 FUNAI 120 KENWOOD 152 013 MAGNAVOX 032 121 MARANTZ 211 MITSUBISHI 121 NAD 121 OPTIMUS 049 013 PANASONIC 113 PHILIPS 032 PIONEER 106 117 121 RADIO SHACK 120 RCA 002 REALISTIC 049 RUNCO 127 SANYO 075 SHARP 152 013 SONY 053 110 TECHNICS 113 THETA DIGITAL 032

Page 46 of the Universal Remote Control MX-3500 user manual — BRAND CODE NUMBERS
Page 46 · click to enlarge
Page 46

DVD (continued) - Laser Disc Players

BRAND CODE NUMBERS

TOSHIBA 152 106 YAMAHA 043 129

VCR - VCRs

BRAND CODE NUMBERS

AIWA 034 161 AKAI 016 146 043 046 124 125 142 AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 023 039 043 BROOKSONIC 035 037 129 CANON 028 031 CAPEHART 108 CRAIG 003 040 135 CURTIS MATHES 031 041 DAEWOO 111 116 117 119 005 007 010 065 108 110 112 DAYTRON 108 DBX 012 023 039 043 DYNATECH 034 053 ELECTROHOME 059 EMERSON 006 029 035 017 025 027 031 034 036 037 046 101 129 131 138 153 162 116 FISHER 003 010 008 009 FUNAI 034 GE 031 072 147 063 107 109 144 GO VIDEO 132 136 155 040 115 GOLDSTAR 101 106 114 013 020 012 123 HARMAN KARDON 012 045 HITACHI 004 026 150 018 034 043 063 137 160 013 INSTANTREPLAY 031 JCL 031 JCPENNEY 012 013 015 040 066 101 JENSEN 043 JVC 048 043 130 150 055 060 012 031 050 152 166 KENWOOD 014 048 034 047 LG 101 106 114 013 020 012 123 LLOYD 034 LXI 034 003 009 017 106 MAGIN 040 MAGNAVOX 067 031 034 068 041 156 164 MARANTZ 067 069 012 031 156 MARTA 101 MATSUI 027 030 MEI 031 MEMOREX 101 003 010 014 031 034 053 072 102 134 139 MGA 045 046 059 MINOLTA 013 020 MITSUBISHI 059 061 151 013 020 045 046 051 142 049 168 MTC 034 040 MULTITECH 024 034 NEC 012 023 039 043 048 NORDMENDE 043 OPTONICA 053 054

Page 47 of the Universal Remote Control MX-3500 user manual — BRAND CODE NUMBERS
Page 47 · click to enlarge
Page 47

VCR - VCRs (continued)

BRAND CODE NUMBERS

ORION 025 PANASONIC 066 070 145 083 133 140 157 163 074 167 PENTAX 013 020 031 063 PHILCO 031 034 067 PHILIPS 031 067 034 101 054 071 156 PILOT 101 PIONEER 021 013 048 PORTLAND 108 PULSAR 072 QUARTZ 002 014 QUASAR 066 145 075 RADIO SHACK 123 RCA 107 109 144 147 158 041 145 013 020 140 034 040 REALISTIC 003 008 010 014 031 034 040 053 054 101 RICO 058 RUNCO 148 SALORA 014 SAMSUNG 102 104 113 115 112 120 032 040 066 107 109 122 125 SANSUI 022 043 048 135 SANYO 003 010 007 014 134 102 SCOTT 017 037 112 129 131 SEARS 003 008 010 014 081 013 101 009 017 073 112 SHARP 149 054 031 159 165 SHINTOM 024 SIGNATURE 034 SONY 056 057 058 077 052 003 078 076 031 149 154 SOUNDESIGN 034 STS 013 SYLVANIA 031 034 059 067 SYMPHONIC 034 TANDY 010 034 TATUNG 039 043 TEAC 034 039 043 TECHNICS 031 070 TEKNIKA 031 019 034 101 THOMAS 034 TMK 006 TOSHIBA 112 131 079 008 059 047 082 013 042 081 TOTEVISION 040 101 UNITECH 040 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 034 046 141 VIDEOSONIC 040 WARDS 003 013 017 024 031 034 040 053 054 131 YAMAHA 012 034 039 043 ZENITH 072 080 056 048 101 034 058

VCR - TV/VCR Combos

BRAND CODE NUMBERS

DAEWOO 005 117 EMERSON 153

Page 48 of the Universal Remote Control MX-3500 user manual — BRAND CODE NUMBERS
Page 48 · click to enlarge
Page 48

VCR (continued) - TV/VCR Combos

BRAND CODE NUMBERS

FUNAI 034 GOLDSTAR 101 123 HITACHI 034 JCPENNEY 101 LG 101 123 LLOYD 034 MAGNAVOX 034 067 MEMOREX 101 PANASONIC 070 167 PHILIPS 034 067 RADIO SHACK 123 RCA 034 SEARS 101 SONY 057 154 SYLVANIA 067 SYMPHONIC 034 THOMAS 034 ZENITH 034

AUDIO - Receivers, Amps, Preamps and Tuners

BRAND CODE NUMBERS

ADC 007 ADCOM 082 092 225 161 269 355 356 366 AIWA 170 018 104 202 203 213 211 188 AKAI 138 189 AMC 125 126 127 128 258 281 282 038 AMEND 054 AMX 196 ANGSTROM 142 ANTHEM 335 336 337 338 339 ARCAM 141 418 419 ATLANTIC TECHNOLOGY 342 AUDIO ACCESS 147 AUDIO ALCHEMY 135 AUDIO DESIGN 194 221 011 AUDIO EASE 021 196 207 AUDIO FILE 071 AUDIO MATRIX 167 AUDIO SOURCE 273 AUDIO TECHNICA 134 B & K 096 097 BOSE 070 170 224 347 409 459 460 BOSTON ACOUSTICS 447 BRYSTON 023 CARVER 006 028 061 071 201 214 226 180 185 022 029 077 284 CASIO 076 CHIRO 140 CINEMA SOUND 034 134 CITATION 148 272 CLARION 026 COMPAQ 382 CURTIS MATHES 076

Page 49 of the Universal Remote Control MX-3500 user manual — BRAND CODE NUMBERS
Page 49 · click to enlarge
Page 49

AUDIO (continued) - Receivers, Amps, Preamps and Tuners

BRAND CODE NUMBERS

DELPHI 415 515 DENON 002 034 109 215 229 230 027 037 234 259 330 340 341 349 350 400 401 402 444 EIGER 149 ELAN 057 290 ENLIGHTENED AUDIO 099 098 ESCIENT 368 381 451 452 453 454 FANFARE 352 FISHER 047 214 180 182 297 FLEXTRONICS 378 FOSGATE 062 231 FOSGATE AUDIONICS 342 GE 056 260 GOLDSTAR 008 HAFLER 174 HARMAN KARDON 231 233 254 153 154 118 121 227 277 317 318 365 HITACHI 020 IMERGE 371 INKEL 197 INTEGRA 354 438 JAMO 398 JBL 263 JCPENNEY 076 216 JEFF ROWLAND 206 JENSEN 058 JVC 240 163 191 114 266 279 291 KENWOOD 026 066 145 146 181 190 197 192 182 199 151 222 180 005 280 374 KINERGETICS 220 140 KLH 331 KOSS 216 KRELL 150 072 376 384 KYOCERA 007 LEXICON 120 235 236 237 357 358 359 360 361 362 363 364 LINN 124 377 LUXMAN 137 139 052 165 115 004 009 LXI 076 056 MAGNAVOX 086 164 152 208 MARANTZ 006 028 031 040 063 185 186 251 265 119 289 296 MCINTOSH 238 286 MCS 076 MERIDIAN 100 012 013 MITSUBISHI 242 243 204 MONDIAL 157 158 042 043 081 112 MYRYAD 276 293 NAD 186 113 283 478 479 NAKAMICHI 111 244 245 172 183 287 NEC 176 NIRO 343 NILES 403 ONKYO 017 046 064 107 108 187 079 080 090 179 209 270 275 438 OPTIMUS 026 041 138 OUTLAW 342 PANASONIC 032 195 219 177 292 PARASOUND 129 130 132 261 294 295 333 334 PHAST 196 PHILIPS 249 250 251 063 119

Page 50 of the Universal Remote Control MX-3500 user manual — BRAND CODE NUMBERS
Page 50 · click to enlarge
Page 50

AUDIO (continued) - Receivers, Amps, Preamps and Tuners

BRAND CODE NUMBERS PIONEER 014 033 039 044 045 050 069 159 168 116 035 078 198 480 POLKAUDIO 029 PROCEED 144 268 RCA 010 048 117 156 067 288 REALISTIC 019 056 073 075 095 REQUEST 351 REVOX 162 ROTEL 074 083 085 RUSSOUND 379 391 392 SAMSUNG 016 SANSUI 040 048 110 119 065 228 SANYO 047 059 SCOTT 019 091 SEARS 076 SHARP 026 094 131 175 181 SHERWOOD 024 038 055 102 103 105 106 051 030 447 SONY 018 093 223 247 248 160 166 015 101 184 218 271 353 369 372 380 417 421 SOUNDESIGN 036 SOUNDMATTERS 375 SOUNDSTREAM 084 088 SSI 068 SUMO 171 SUNFIRE 344 345 346 TAEKWANG 138 TEAC 005 019 049 111 212 217 TECHNICS 122 176 193 219 178 177 200 257 262 THETA DIGITAL 136 TOSHIBA 060 087 198 278 WARDS 180 YAMAHA 026 253 169 067 173 205 264 232 089 264 274 285 332 373 432 433 ZENITH 143 210

SAT - Satellite Receivers and DSS

BRAND CODE NUMBERS

CABLEVISION / VOOM 148 DIRECTV 173 ECHOSTAR / DISH 122 167 168 EXPRESSVU 122 GENERAL ELECTRIC 151 106 150 GENERAL INSTRUMENT 148 GOI 122 HITACHI 139 140 HTS 122 HUGHES 161 162 068 154 165 166 108 117 JVC 122 LG 170 MAGNAVOX 136 MEMOREX 136 MITSUBISHI 068 154 MOTOROLA 148 NEXT LEVEL 148 PANASONIC 142 160

Page 51 of the Universal Remote Control MX-3500 user manual — BRAND CODE NUMBERS
Page 51 · click to enlarge
Page 51

SAT (continued) - Satellite Receivers and DSS

BRAND CODE NUMBERS

PANSAT 172 PAYSAT 136 PHILIPS 152 153 156 068 154 136 108 117 PROSCAN 151 106 150 RADIOSHACK 148 RCA 151 106 150 SAMSUNG 123 155 163 169 175 SKY 164 SONY 103 STAR CHOICE 148 TOSHIBA 127 068 154 157 158 UNIDEN 136 ZENITH 159

CD - CD Changers and Players

BRAND CODE NUMBERS

ADCOM 062 042 AIWA 059 065 088 089 105 122 170 187 AKAI 085 195 202 AMC 231 232 AMEND 118 ARCAM 238 AUDIO ACCESS 119 147 AUDIO EASE 165 AUDIO TECHNICA 046 BSR 037 057 CALIFORNIA AUDIO 103 008 CAPETRONIC 063 CARRERA 057 080 CARVER 185 041 044 050 086 107 130 134 135 138 139 203 204 167 CASIO 111 182 CLARINETTE 182 CREEK 159 CROWN 035 DENON 002 123 EMERSON 042 069 102 FISHER 050 185 134 008 FRABA 111 GENEXXA 010 069 102 GOLDSTAR 080 HAITAI 093 HARMAN KARDON 018 033 047 208 HITACHI 042 175 INKEL 130 143 144 JCPENNEY 014 061 092 141 JENSEN 158 JVC 004 022 136 163 213 214 242 243 KENWOOD 185 007 023 055 071 072 142 137 254 KOSS 061 KRELL 241 KYOCERA 005 LOTTE 102

Page 52 of the Universal Remote Control MX-3500 user manual — BRAND CODE NUMBERS
Page 52 · click to enlarge
Page 52

CD (continued) - CD Changers and Players

BRAND CODE NUMBERS

LUXMAN 011 028 070 076 249 252 LXI 059 MAGNAVOX 044 107 MARANTZ 027 041 044 051 077 107 209 246 MCINTOSH 212 247 MCS 014 073 092 MEMOREX 010 MISSION 044 107 MITSUBISHI 179 MITSUMI 153 MODULAIRE 182 MONDIAL 147 MYRYAD 244 155 NAD 006 005 067 178 NAKAMICHI 217 218 219 095 NEC 014 062 NIKKO 046 NSM 044 107 ONKYO 030 038 039 168 169 OPTIMUS 010 050 057 058 081 082 083 085 093 195 PANASONIC 103 201 172 008 068 248 PARASOUND 233 240 PHILIPS 041 044 107 246 253 PIONEER 010 020 025 056 174 175 176 PROCEED 239 PROTON 044 107 228 QUASAR 103 008 RADIO SHACK 182 RCA 017 042 150 REALISTIC 042 050 051 102 181 182 187 ROTEL 044 107 161 178 250 SAE 044 107 SANSUI 044 069 107 128 171 190 125 SANYO 050 SCOTT 069 102 SHARP 026 031 051 066 SHERWOOD 003 019 051 096 112 115 119 166 SIGNATURE 033 SONY 048 081 097 126 133 177 225 226 164 SOUNDESIGN 251 SUMO 155 SYLVANIA 044 107 SYMPHONIC 052 181 TAEKWANG 195 085 TANDY 010 TEAC 015 034 036 051 052 101 131 140 079 TECHNICS 060 103 200 172 184 008 068 TECHWOOD 076 THETA DIGITAL 234 235 TOSHIBA 006 067 091 160 148 VECTOR RESEARCH 080 VICTOR 004 022 114 124 WARDS 185 033 YAMAHA 024 046 054 186 183 245 YORX 182

Page 53 of the Universal Remote Control MX-3500 user manual — BRAND CODE NUMBERS
Page 53 · click to enlarge
Page 53

DVR - TiVo, Replay and other Digital Video Recorders

BRAND CODE NUMBERS

ECHOSTAR / DISH 122 HUGHES 108 117 JVC 122 PHILIPS 108 090 117 RCA 109 REPLAY NETWORKS 075 SONY 104 105 TIVO 090 117

AUX - Tape Decks

BRAND CODE NUMBERS

AIWA 015 071 100 114 CARVER 006 008 027 024 036 DENON 105 227 229 FISHER 064 GOLDSTAR 011 HARMAN KARDON 233 JVC 106 116 239 240 KENWOOD 005 013 023 026 064 145 146 181 190 LINN 124 LUXMAN 035 137 139 MAGNAVOX 027 MARANTZ 014 027 056 065 087 MCINTOSH 238 MITSUBISHI 242 243 NAD 029 048 NAKAMICHI 244 245 025 ONKYO 002 012 016 017 018 019 115 OPTIMUS 026 054 055 PANASONIC 007 010 032 088 195 PHILIPS 027 087 PIONEER 003 039 047 050 066 098 222 QUASAR 007 088 SANSUI 027 113 119 224 SHARP 026 057 131 175 181 SHERWOOD 038 004 028 030 033 034 SONY 020 022 052 084 089 TEAC 009 059 212 TECHNICS 007 010 076 088 109 122 193 TOSHIBA 112 VICTOR 106 YAMAHA 021 026 031 067 040

AUX - Custom Installation Products

BRAND CODE NUMBERS

3M 152 AIWA 164 ARCHER 155

Page 54 of the Universal Remote Control MX-3500 user manual — BRAND CODE NUMBERS
Page 54 · click to enlarge
Page 54

AUX (continued) - Custom Installation Products

BRAND CODE NUMBERS

AURORA MULTIMEDIA 220 AUTON 191 CELADON 221 CRESTRON 213 214 215 216 217 218 DELL 261 262 DMX 156 DRAPER SCREEN 204 DREAMVISION 097 DWIN 080 253 EVERQUEST 206 EXTRON 151 FAROUDJA 184 FUJI 209 GATEWAY 261 262 HP 261 262 HUNTERDOUGLAS 219 JERROLD 153 JVC 185 KENWOOD 185 KEYSPAN 297 LITE-TOUCH 208 257 LUTRON 158 159 077 MAKITA 186 201 MINDPATH 205 NILES 160 187 NSM 161 PIANO DISC PLUS 085 POLKAUDIO 162 RUSSOUND 081 SCIENTIFIC ATLANTA 163 156 SIMA 082 SOLO ELECTRONICS 207 SOMFY 078 079 SONY 164 165 166 261 262 STARCOM 153 TURBOSCAN 167 VELODYNE 203 X-10 183 093 XANTECH 168 169 170 171 172 188 189

Page 55 of the Universal Remote Control MX-3500 user manual — Who can I call for more answers?
Page 55 · click to enlarge
Page 55

Frequently Asked Questions

What is a “macro” button?

It is an Osiris button you set to make a lot of things happen when you press it. For example, to watch a DVD in most home theaters requires several remote controls and many button presses (power up the TV, power up the surround sound, power up the DVD player, set the TV to the correct video input, set the surround sound to the correct audio input and finally; press play on the DVD player remote control).

Instead of pressing all of those buttons one at a time, the Osiris enables you to setup one button that does it all automatically with one press. For more information on how and why you should setup macro and favorite channel buttons, read pages 19-22.

If the batteries run out, will I lose my settings?

No. The Osiris stores all of your settings in non-volatile FLASH memory. You could remove the batteries for months, replace them at your con- venience and the Osiris would still remember your settings.

Who can I call for more answers?

The Universal Remote Control technical support and customer service staff are ready to answer any questions you might have.

Call us at 1-914-835-4484 Monday - Friday, 9AM to 6PM (EST)

Page 56 of the Universal Remote Control MX-3500 user manual — Specifications
Page 56 · click to enlarge
Page 56

Warranty

The Osiris is covered against any manufacturers defects or workmanship for a period of one year from the date of purchase if purchased from an authorized Universal Remote Control dealer. Units purchased from online auction sites or other unauthorized resellers have no warranty. This warranty does not cover the following items:

- Damage from misuse, neglect, or acts of nature. - Products that have been modified or incorporated into other products. - Products purchased more than 12 months ago. - Units purchased from unauthorized dealers or companies.

Specifications

Learning Capability - 784 IR commands at standard frequencies (15kHz to 100kHz) Macro Capability - 472 Macros of up to 190 steps each IR Range (Line of Sight via Infrared): 30-50 feet, depending on the envi- ronment RF Range (radio frequency): 50 to 100 feet, depending upon the envi- ronment RF Frequency: 418MHz Weight: 8 oz. (with batteries) Size: 8.5” x 2 7/16” x 1” Batteries: Four AAA Alkaline batteries included LCD Size: approximately 7/8” x 1-7/8”

Page 57 of the Universal Remote Control MX-3500 user manual — M E M O
Page 57 · click to enlarge
Page 57

M E M O

Page 58 of the Universal Remote Control MX-3500 user manual — M E M O
Page 58 · click to enlarge
Page 58

M E M O

Page 59 of the Universal Remote Control MX-3500 user manual — M E M O
Page 59 · click to enlarge
Page 59

M E M O

Page 60 of the Universal Remote Control MX-3500 user manual — Erasing
Page 60 · click to enlarge
Page 60

500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532

OCE-0024B Rev. 03

Ask about the Universal Remote Control MX-3500

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Universal Remote Control MX-3500

Be the first to ask — other owners or our team will answer.

Original document

Universal Remote Control MX-3500 manual PDF

60 pages·4.6 MB·Universal Remote·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…