Instruction/ maintenance manual of the product D Omo Topcom
Go to page of 9
M Domo USER MANUAL TELEPHONE ANSWERING MACHINE.
Domo M DESIGN (1.) MICROPHONE (2.) SPEAKER (3.) CASSETTE COMPARTMENT (4.) MESSAGE INDICATOR (LED) (5.) • OUTGOING MESSAGE (OGM) (6.) • PLAY • REWIND (7.) • MEMO • FAST FORWARD (8.) • VOLUME KNOB • ON-OFF (9.) TELEPHONE LINE CORD CONNECTION (10.
Domo M 1 Domo M 2 11.4. Rewind during the playback of recorded messages 11.5. Fast-forward during the playback of recorded messages 11.6. Memo-recording 12. REMOTE CONTROL 12.1. The topcom domo is switched on 12.2. The topcom domo is switched off 12.3.
M 4 Domo 2.2. INSERT THE CASSETTE 1. Push the front panel of the cassette compartment upwards. 2. Insert the cassette into the answering machine as follows: • The upper side of the cassette has to lean against the cassette tape holder of the tape deck mechanism.
M 6 Domo Domo M 5 Remarks: • Always pull the plug out of the outlet when you clean, replace or turn the cassette • If the power supply is switched on again, the cassette will check itself.
Domo M 7 M 8 Domo 4. The recorded message will automatically be rewinded. 5. The answering machine is ready to register incoming messages. 3.2. CHECK THE MESSAGE Press and release the key (message) (5). Your message will be reproduced after 2 seconds.
M 10 Domo 11.1. SAVE MESSAGES • After listening to the recorded messages, push the key (play/rewind) (6). Press and hold down the key until the led (4) switches off. • Release the key (play/rewind) (6). The led (4) will flash again. The messages are being saved.
M 12 Domo 12.1. THE TOPCOM DOMO IS SWITCHED ON • Dial the phone number (from any address) to which your TOPCOM DOMO is connected. • You will hear a message followed by a beep.
M 14 Domo - Have you plugged the telephone line cord of your TOPCOM DOMO into the wall telephone jack? - Have you connected the adapter cord to the power supply outlet? • You hear a beep every 5 seconds! - Have you inserted the cassette in the right way? - The cassette needs replacing.
An important point after buying a device Topcom D Omo (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Topcom D Omo yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Topcom D Omo - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Topcom D Omo you will learn all the available features of the product, as well as information on its operation. The information that you get Topcom D Omo will certainly help you make a decision on the purchase.
If you already are a holder of Topcom D Omo, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Topcom D Omo.
However, one of the most important roles played by the user manual is to help in solving problems with Topcom D Omo. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Topcom D Omo along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
