Instruction/ maintenance manual of the product DX Quantum
Go to page of 12
Dynamic DX Scanner Control Basic Operation Instructions T M.
2 Basic Operation Instructions DX Scanner Copyright © 2001 Pride Mobility Products Corporation This manual describes basic operation for the Dynamic DX Scanner Control only and must be read in conjunction with the owner s manual supplied with your power chair .
DX Scanner Basic Operation Instructions 3 TABLE OF CONTENTS INTRODUCTION ................................................................................ 4 Dynamic DX Scanner Control ................................................................... 4 SELECT MODE .
4 Basic Operation Instructions DX Scanner INTRODUCTION W elcome to Quantum Rehab, a division of Pride Mobility Products Corporation (Pride). Quantum Rehab is dedicated to the customization of power chairs for users with advanced rehabilitation and mobility issues.
DX Scanner Basic Operation Instructions 5 Figure 1. Scanner Control Components and Connections B A CK OF MODULE Drive Mode LED Indicates if the Drive Mode is powered on or off. En vironmental Mode LED Indicates if Environmental Mode is powered on or off .
6 Basic Operation Instructions DX Scanner SELECT MODE 1. Press the On/Off Button on the DX compatible Master Remote used on your power chair . The Module Status LED on the Scanner will light up, indicating that it is in Standby Mode and ready for use.
DX Scanner Basic Operation Instructions 7 SEA T MODE 1. Press the Select Switch when the Seat Mode LED is lit. Once selected, the Scanner will cycle clockwise around the seating commands (Directional LEDs). Figure 3. Actuator Selections 2. There are four Seat Positioning Actuators represented by two each of the Directional LEDs.
8 Basic Operation Instructions DX Scanner ENVIR ONMENT AL MODE 1. Press the Select Switch when the Environmental Mode LED is lit. Once selected, the Scanner will cycle clockwise from the top (forward) LED. See figure 2. 2. The first four LEDs are momentary selections, and the last four LEDs are latching selections.
DX Scanner Basic Operation Instructions 9 NO TES.
10 Basic Operation Instructions DX Scanner NO TES.
DX Scanner Basic Operation Instructions 11 NO TES.
12 Basic Operation Instructions DX Scanner Exeter , P A Quantum Hotline: 1-866-800-2002 V isit the Rehab Zone at: www .quantumrehab.com INFMANU1747/A/JUL Y 2001 T M.
An important point after buying a device Quantum DX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Quantum DX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Quantum DX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Quantum DX you will learn all the available features of the product, as well as information on its operation. The information that you get Quantum DX will certainly help you make a decision on the purchase.
If you already are a holder of Quantum DX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Quantum DX.
However, one of the most important roles played by the user manual is to help in solving problems with Quantum DX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Quantum DX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
