Instruction/ maintenance manual of the product 9900CW Primera
Go to page of 24
V oiceAnnounce ® 9900CW T alking Caller ID Users Guide V oiceAnnounce ® 9900CW Guía del Usuario del Sistema de Identificación de Llamadas Hablada Rev.
2 T able of Contents Introduction ................................................................................... 3 Features ........................................................................................ 4 Important Notice ..............
V oiceAnnounce ® 9900CW T alking Caller ID Users Guide Introduction The V oiceAnnounce 9900CW caller ID is designed to help you iden- tify calls by displaying the caller ID information on an LCD screen and announcing the caller’s identity over a built-in speaker .
Features The model 9900CW has advanced Caller ID features that give you more control over your incoming calls: • Announces calls by recorded name or telephone number • Identify the caller without .
5 5.
Important Notice The V oiceAnnounce 9900CW will announce the caller ID for incoming calls over the built-in speaker . T o T urn OFF the caller ID announcement: 1. Press the MODE key nine times, or until you see the words “Adjust V olume” on the display .
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read and understand all instructions. 2.
9. Do not overload wall outlets and extension cords, as this can result in the risk of fire or electric shock. 10. Never push objects of any kind into this product through cabi- net slots, as they may touch dangerous voltage points or short out parts, resulting in the risk of fire or electric shock.
Installation Inside the V oiceAnnounce 9900CW package you will find the V oiceAnnounce Caller ID unit, users guide, a phone cord, and an AC power adapter . 1. Connect the phone cord that extends from the telephone jack on your wall to the LINE jack on the back of the caller ID unit.
If your household experiences a power outage the caller ID unit will shut off without being damaged. It will remember calls in the log, recordings, and other settings, so you won’t have to re-program the unit when the power comes back on. When the power is restored, the caller ID unit will be ready to screen calls.
Operating Modes There are ten operating modes in the 9900CW . Normally , the unit is in standby mode, waiting for a call. Y ou can go to other modes by pressing the MODE key .
or her caller ID information sent to you. Y ou can advise callers to “Un-Block” by dialing *82 before calling you. Announcing Call W aiting Calls If you subscribe to Call W aiting ID service, VoiceAnnounce 9900CW will announce and display information about your call waiting calls.
Reviewing Calls Y our 9900CW will store up to 99 call records, providing you with the name and/or number of the last 99 callers. This information is re- corded in the call log as soon as it is receive.
Entering a T elephone Number Manually Do you need to enter a number manually? Y ou can record names and outgoing messages for any number that is already stored in the call log, or stored in the list of calls with recorded names or messages. If the number you want is not already stored in memory , you can enter it manually .
While reviewing the call log, you can record a name to associate with the displayed telephone number by simply pressing and hold- ing down the RECORD key . After you hear the “beep” say the name, then release the RECORD key . The recorded name will be played back to you.
While the caller ’s telephone number is displayed, press the MODE key until the RECORD OGM mode is displayed. Using the RE- VIEW keys, select which message type you prefer – either a tem- porary or a permanent message. Then press and hold the RECORD key , wait for the “beep”, and record your message.
dialing only 7-digits, press the MODE/DIAL key again to complete the call. If 10-digit or 1+10-digit dialing is necessary to place the call, use the REVIEW keys to select the appropriate dialing method, then press the MODE/DIAL key to complete the call.
CW NAME – T urns ON/OFF announcement of call-waiting caller’s identity only if a recorded name is associated with the caller . Default OFF . T roubleshooting Having problems? Before contacting ClassCo or your dealer , check the following list of suggestions.
has been activated and is working with your line properly . Make sure you’re talking on the phone plugged into the back of the caller ID unit Make sure the power cord is correctly plugged in.
FCC Information Y our caller ID unit has been registered with the Federal Communications Com- mission (FCC), and it complies with the standards set forth in part 68 of the FCC rules. The FCC requires that we provide the following information. Connection And Use : The FCC requires you to use a modular telephone jack.
Radio Interference Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de- signed to provide reasonable protection against harmful interference in a resi- dential installation.
Manufacturers 1-Y ear Limited W arranty Who Is Covered? Y ou must have proof of purchase to exchange the product. A sales receipt or other document showing the date that you purchased the product is considered proof of purchase. What Is Covered? Coverage begins the day you buy your product.
FOR CUSTOMER SER VICE CALL CLASSCO TOLL FREE: (888) 252-7726 or visit product support on-line at www .classco.com Copyright © 2004 ClassCo Inc. All Rights Reserved ClassCo ® and V oiceAnnounce ® are trademarks of ClassCo Inc. This product is protected under the following US Patents: 5526406, 6038443 Printed in China Rev.
25 Un año Garantía limitada del fabricante ¿Quién está cubierto? Usted tiene que tener un comprobante de compra para intercambiar el producto. Un recibo o algún otro documento que muestre la fecha en la cual usted compró el producto es considerado como comprobante de compra.
An important point after buying a device Primera 9900CW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Primera 9900CW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Primera 9900CW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Primera 9900CW you will learn all the available features of the product, as well as information on its operation. The information that you get Primera 9900CW will certainly help you make a decision on the purchase.
If you already are a holder of Primera 9900CW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Primera 9900CW.
However, one of the most important roles played by the user manual is to help in solving problems with Primera 9900CW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Primera 9900CW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
