Instruction/ maintenance manual of the product Asynchronous Patton electronic
Go to page of 10
USER MANUAL MODEL 1012ARC Asynchronous, T wo-Channel Short Range Modem Rack Card SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 Part #07M1012ARC-C Doc #040041UC Revised 9/10/97 CERTIFIED An ISO-9001 Certified Company Dear V alued Customer , Thank you for purchasing Patton Electronics products! W e do appreciate your business.
1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 1012ARC components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.
2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Y ear parts and labor .
3.3 REAR CARD CONFIGURA TION After you have configured the Model 1012ARC, you will need to set up your rear card. The Model 1012ARC has two interface card options: the 1Q1 1 (which comes equipped with two RJ-1 1 ports and two RJ-45 ports) and the 1Q45 (which comes equipped with four RJ-45 ports).
7 JB6 & JB7: DTE as DSR or RI Because this rear card is designed to function with a variety of rack cards, it comes equipped with two strap positions.
Switching the Power Supply On and Off The power supply on/off switch is located on the front panel. When plugged in and switched on, the power LED will glow . Since the Model 1000R16 is “hot swappable”, you do not need to turn off the power before removing rack cards.
4.4.2 MUL TIPOINT TWISTED P AIR CONNECTION The Model 1012ARC supports multipoint applications using a star topology . Maximum distance between the units will vary based upon the number of drops, data rate, wire gauge, etc. Call Patton T echnical Support for specific distance estimates.
5.2 POWER-UP There is no power switch on the Model 1012ARC: Power is automatically applied to the Model 1012ARC when its card-edge connector makes contact with the chassis’ mid-plane socket, or when the chassis’ power supply is turned on.
APPENDIX B CABLE RECOMMENDA TIONS The Patton Model 1012ARC operates at frequencies of 20kHz or less and has been performance tested by Patton technicians using twisted-pair cable with the following characteristics: Wire Gauge Capacitance Resistance 19 A WG 83nf/mi or 15.
APPENDIX D INTERF ACE SETTINGS P A TTON MODULAR INTERF ACE - 8/10 Wire RJ-45 Contact Number Circuit Description 1 N/A Not Used 2 125 DSR 3 109 Received Line Signal Indicator 4 108 / 2 DTE Ready 5 102 .
An important point after buying a device Patton electronic Asynchronous (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic Asynchronous yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic Asynchronous - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic Asynchronous you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic Asynchronous will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic Asynchronous, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic Asynchronous.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic Asynchronous. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic Asynchronous along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
