Instruction/ maintenance manual of the product 1000S Patton electronic
Go to page of 8
USER MANUAL MODEL 1000 and 1000S Ultra Miniature Asynchronous Short Range Modems SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .
1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 1000 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.
2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Y ear parts and labor .
4.0 INST ALLA TION Once you have properly configured the DTE/DCE switch, you are ready to connect the Model 1000 to your system. This section tells you how to properly connect the Model 1000 to the twisted pair and RS-232 interfaces, and how to operate the Model 1000.
1. Open the unit by gently inserting a screwdriver between the DB-25 connector and the lip of the plastic case (see Figures 4 and 5, below). Y ou don't have to worry about breaking the plastic, but be careful not to bend the D-sub connector .
8. Place the 2 halves of the strain relief assembly on either side of the telephone wire and press together very lightly (See Figure 9, below). Slide the assembly so that it is about 2 inches from the terminal posts and press together firmly .
APPENDIX B P A TTON MODEL 1000 CABLE RECOMMENDA TIONS The Patton Model 1000 operates at frequencies of 20kHz or less and has been performance tested by Patton technicians using twisted- pair cable with the following characteristics: Wire Gauge Capacitance Resistance 19 A WG/.
APPENDIX C P A TTON MODEL 1000 INTERF ACE SETTINGS APPENDIX D P A TTON MODEL 1000 BLOCK DIAGRAM Copyright © Patton Electronics Company All Rights Reserved 1- (FG) Frame Ground 2- (TD) T ransmit Data .
An important point after buying a device Patton electronic 1000S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 1000S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 1000S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 1000S you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 1000S will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 1000S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 1000S.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 1000S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 1000S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
