Instruction/ maintenance manual of the product BPW129 Oregon Scientific
Go to page of 13
1 EN Oregon Scientific™ Wrist Blood Pressure Monitor (BPW129) User Manual T ABLE OF CONTENTS Introduction ................................................................... 2 Key features ............................................................
2 EN INTRODUCTION Thank you for selecting the Oregon Scientific™ Wrist Blood Pressure Monitor (BPW129) as your health product of choice. This product has been designed to provide you with many years.
3 EN SAFETY AND CARE INSTRUCTIONS Safety precautions Please observe the following safety precautions when setting up and using your blood pressure monitor . · This device is intended for adult use only . · This device is intended for non-invasive measuring and monitoring of arterial blood pressure.
4 EN Caring for your blood pressure monitor T o ensure you receive the maximum benefit from using this product, please observe the following care guidelines. · When not in use, store the main unit in the protective plastic container that came with it.
5 EN hypertensive people do not realize they are at risk until their health is seriously threatened. What is the standard blood pressure classification? The following chart (Figure 3) was taken from the World Health Organization (WHO), and describes the various classifications.
6 EN detect your blood pressure. Before every measurement, the main unit establishes a “ zero pressure ” equivalent to the air pressure. Then it starts inflating the wrist cuf f to 180mmHg or higher until it senses that it has blocked your blood in the artery .
7 EN Positioning the wrist cuff It is important to properly position the wrist cuff to ensure that you receive an accurate reading. 1. Remove all accessories (watch, bracelet, etc.) from your left wrist. If your physician has diagnosed you with poor circulatio n in your left arm, use your right wrist.
8 EN T AKING A BLOOD PRESSURE MEASUREMENT Y ou can choose to take your blood pressure while sitting or lying down. Helpful Tips for taking a measurement: · Be sure to set the clock before taking your first measurement, or whenever you replace the batteries, so that the date and time are stored in the memory with your history .
9 EN RECALLING MEASUREMENTS STORED IN THE MEMOR Y The memory can hold up to 8 records. The records are automatically stored each time you take a new measurement. Note: · The most recent record (1) is shown first. Each new measurement is assigned to the first (1) record.
10 EN Display is dim or will not light up. No power Batteries are exhausted. Replace with new batteries ( 6). Batteries are inserted incorrectly . Insert the batteries correctly( 6). Low batteries shows on the display . Batteries are low . Replace with new batteries ( 6).
11 EN SPECIFICA TIONS Application: Measuring method Oscillometric / non-invasive Application For adult use only Measurement location Wrist section of lower arm Memory Maximum 8 records Dimensions: Height x Width x Depth ~ 72mm x 72mm x 24.5mm (2.8in x 2.
12 EN Operating environment: Operation 10 ° C … 40 ° C (50 ° F … 104 ° F) Storage / T ransport -20 ° C … 60 ° C (-4 ° F … 140 ° F) Humidity range 10% … 83% relative humidity INFORMA .
13 EN kPa mmHg 60 80 100 120 140 160 180 200 220 M D D M s s Name: Age: Weight: (kg/lbs) Date Time 10 PM 10 PM 10 Oct 17 Oct SYS DIS MAP 158 90 110 155 95 112 85 90 8.0 10.7 13.3 16.0 18.7 21.3 24.0 26.7 29.3 © 2004 Oregon Scientific. All rights reserved.
An important point after buying a device Oregon Scientific BPW129 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific BPW129 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific BPW129 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific BPW129 you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific BPW129 will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific BPW129, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific BPW129.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific BPW129. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific BPW129 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
