Instruction/ maintenance manual of the product M24/7 Omron
Go to page of 28
1 Instruc tion Manual M24 /7 Ambulator y Blood Pr essure Monitor www.omr on-healthcare.com EN IM_EN.indd 1 19/07/2012 14:29:53.
2 Introduction Thank you for purchasing the OMRON M24/7 ambulatory blood pressure monitor . The OMRON M24/7 is a silent, compact and very reliable ambulatory blood pressure monitor . A large LCD screen insures easy readability and its lightweight design provides for maximum patient comfort.
3 Content Introduction ........................................................................................................ 2 Important Safety Information ........................................................................... 4 Recommended use of ambulatory blood pressure monitoring .
4 Important Safety Information Important Safety Information This symbol on the Omron M24/7 monitor is a warning that you should read the accompanying documentation (this manual). W arning: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury .
5 Caution: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury to the user or patient or damage to the equipment or other property . (General Usage) No user serviceable parts inside. The OMRON M24/7 monitor contains high complexity electronic and ne mechanical components.
6 Recommended use of ambulatory blood pressure monitoring The European Society of Hypertension has published recommendations for ambulatory blood pressure measurement (O’Brien, E.
7 1. Overview 1.1. Main Unit Front side Back side 1.2. Arm Cuffs The set contains 2 adult cuffs: normal size (24-32cm) and large size (32-42cm) A. Arm Cuff B. Air Plug C. Air T ube CUFF connection Interface connection ST ART button CUFF connection DA Y/NIGHT button LCD EVENT button IM_EN.
8 1.3. Display Communication with PC Heart symbol for pulse indication Night mode: moon sign is lit Crossed battery symbol warns about low battery Time display Battery voltage display For details of different display options see p.
9 2. Operating Instructions 2.1. W orking with the OMRON M24/7 Unit The OMRON M24/7 device is a compact, lightweight monitoring unit typically worn by the patient for 24 hours. The OMRON M24/7 operates with two AA size batteries. The memory is capable of storing more than 600 measurements.
10 Switching the device off Press and hold the ST ART button for more than 10 seconds then release it when two horizontal segments appear on the LCD, this way the OMRON M24/7 will be switched off. If you do not release the button in 2 seconds after the two horizontal segments appeared, the monitor will return to normal operation.
11 2.3. Overview Display The OMRON M24/7 shows important status information, the processes and results of individual readings on its LCD. The most important displays are listed here. In addition to these, a lot of extraordinary situations and errors have their own code displayed on the LCD.
12 The monitor must be programmed with the OMRON BP T racker Software installed on the computer (for details see Software Manual). Once the pre- programmed time is reached, the monitor will start operating automatically and perform blood pressure measurements based on the monitoring plan.
13 A successful monitoring session consists of the following steps: 1. Connecting the OMRON M24/7 monitor to the PC (First connection only – not required to repeat with each session) 1. Connect the optical interface, which was delivered with the device, to the USB port of the PC.
14 2.6. Manual Programming The OMRON M24/7 can be programmed with using its buttons, without using a PC. Programming Options There are three different measurement plans which may be selected in case of manual programming. These plans are stored in the device’ s inside memory and they cannot be changed .
15 Software The OMROM M24/7 programmed manually can be used with the OMRON BP T racker Software version 1.14.6 or newer . Manual programming LCD displays: Normal status: time is displayed 10 second delay state: time is displayed but with no double-dot 1.
16 In order to change batteries, take the monitor out of the holder carry pouch and remove the battery compartment cover on the back-side. Place two new , long- life AA alkaline batteries or two properly charged, high capacity AA rechargeable batteries into the compartment as shown in the polarity drawing.
17 Note: Note: It is recommended that the cuff be applied as tightly as acceptable for the patient. A too loose cuff will cause much longer blood pressure measurement times and possibly aborted measurements. With an overly loose cuff, the monitor must pump to tighten the cuff on the arm and then it must reach the pressure necessary for measurement.
18 E 3 battery rundown the AA batteries exhausted during measurement E 4 batteries changed the AA batteries were replaced during the measurement – not shown on LCD E 8 pressure limit exceeded the pressure in the pneumatic system exceeded the preset pressure limit E 9 temporary disturbance external electric signals (e.
19 3.3. Maintenance and Storage Conditions T emperature: -20 - 50 °C Humidity: 10 - 95 %, non condensing Regular checks, warranty , service V eri cation of pressure measurement accuracy is recommended biannually . OMRON M24/7 monitors are covered by a two-year warranty .
20 4. T echnical Data 4.1. T echnical parameters Power supply: 2 AA rechargeable NiCd or NiMH batteries or 2 AA alkaline batteries Display: liquid-crystal Data storage: internal solid state memory Dat.
21 4.2. Safety Concerns Electric shock hazard protection OMRON M24/7 monitors meet relevant shock hazard protection standards. OMRON M24/7 monitors operate with two 1.5V AA batteries or two 1.2V AA rechargeable batteries. This excludes all electric shock hazards, even in the unlikely case of multiple device errors.
22 4.3. EMC Information Medical electrical equipment should be used with precautions according to EMC, and must be installed according to the EMC notices disclosed in this manual as mobile RF transceivers could adversely affect it.
23 Directive and declaration of manufacturer – Electromagnetic immunity OMRON M24/7 is suitable for use in the speci ed electromagnetic environment. The purchaser or user of OMRON M24/7 should assure that it is used in an electromagnetic environment as described below .
24 Directive and declaration of manufacturer – Electromagnetic immunity OMRON M24/7 is suitable for use in the speci ed electromagnetic environment. The purchaser or user of OMRON M24/7 should assure that it is used in an electromagnetic environment as described below .
25 Recommended separation distance OMRON M24/7 is intended to be used in electromagnetic environment with controlled RF disturbances. The purchaser or user of M24/7may help to reduce electromagnetic d.
26 AMBULA T OR Y BLOOD PRESSURE MONIT ORING P A TIENT DIAR Y Name: Date of birth: Monitoring date: 8:00-8:30 20:00-20:30 8:30-9:00 20:30-21:00 9:00-9:30 21:00-21:30 9:30-10:00 21:30-22:00 10:00-10:30 .
27 4.4. Product W arranty Information (a) MONIT OR W ARRANTY . The main monitor unit will be free from defects in materials and workmanship under normal use and service for a period of two (2) years from the date of receipt. This warranty covers the monitor unit only .
28 Remarks 2010. All rights reserved Made in Hungary Meditech Ltd. H-1 184 Budapest, Mikszáth Kálmán utca 24, Hungary Scorpius 33 2132 LR Hoofddorp IM-ABPM-BP5-EN-04-06/2012 IM_EN.
An important point after buying a device Omron M24/7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Omron M24/7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Omron M24/7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Omron M24/7 you will learn all the available features of the product, as well as information on its operation. The information that you get Omron M24/7 will certainly help you make a decision on the purchase.
If you already are a holder of Omron M24/7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Omron M24/7.
However, one of the most important roles played by the user manual is to help in solving problems with Omron M24/7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Omron M24/7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
