Instruction/ maintenance manual of the product DP26-TC Omega
Go to page of 62
DP26-TC Dif ferential T emperature Meter with Thermocouple omega.com e-mail: info@omega.com For latest product manuals omegamanual.info USA MADE IN U ser ’ s Guide Shop on line at.
It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuing certification of its products to the European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.
.
.
.
.
.
.
1 SECTION 1. INTRODUCTION 1.1 UNP ACKING Remove the Packing List and verify that all equipment has been received. If there are any questions about the shipment, use the phone numbers listed on the back cover to contact the Customer Service Department nearest you.
2 1.2 SAFETY CONSIDERA TIONS This device is marked with the international caution symbol . It is important to read this manual before installing or commissioning this device as it contains important information relating to Safety and EMC (Electromagnetic Compatibility).
SECTION 2. ABOUT THE METER 2.1 DESCRIPTION The Differential T emperature meter with thermocouple is a value packed indicator/ controller . Four full digits allow for an accurate display of your temperature. Select from J, K, T or DIN J thermocouple types.
.
.
.
.
.
2.5 BACK OF THE METER Figure 2-2 shows the connector label mounted at the top of the meter housing. T able 2-2 gives a brief description of each connector at the back of the meter .
.
.
.
.
.
3.3 P ANE L MOUNTING Figure 3-3 Meter - Exploded VIew 1. Cut a hole in your panel, as shown in Figure 3-3. For specific dimensions refer to Figure 3-4. 2. Insert the meter into the hole. Be sure the front bezel gasket is flush to the panel. 3. Slide on mounting bracket to secure.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
49 SECTION 13. SPECIFICA TIONS (continued) ALARM OUTPUTS 2 Form "C" on/off relays. Configurable for latched and (if applicable) unlatched by software.
SECTION 13. SPECIFICA TIONS (continued) Figure 13-1 Meter Dimensions 50 SIDE VIEW TOP VIEW CASE REAR COVER 96,0 (3.78) 48,0 (1.89) 20,3 (.80) 151,4 (5.
MENU ITEM FACTORY PRESET VALUES 51 SECTION 14. F ACT OR Y PRESET V ALUES T able 14-1. Factory Preset V alues INPT Input Type: K.TC (Type K T/C) DEC.P Decimal Point Position: FFF.F RD.CF Reading Configuration: R.1=F (Fahrenheit) R.2=D (Shows deviation in “RUN” mode) S1.
52 CE APPRO V ALS INFORMA TION This product conforms to the EMC directive 89/336/EEC amended by 93/68/EEC, and with the European Low Voltage Directive 72/23/EEC. Electrical Safety EN61010-1:2001 Safety requirements for electrical equipment for measurement, control and laboratory.
WARRANTY / DISCLAIMER OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of one (1) year from the date of purchase.
1 1797ML-97 Rev C M1677/0307 W her e Do I Find Ev er ything I Need f or Pr ocess Measur ement and Contr ol? OM EGA…Of Cour se! Shop on line at omega.
An important point after buying a device Omega DP26-TC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Omega DP26-TC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Omega DP26-TC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Omega DP26-TC you will learn all the available features of the product, as well as information on its operation. The information that you get Omega DP26-TC will certainly help you make a decision on the purchase.
If you already are a holder of Omega DP26-TC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Omega DP26-TC.
However, one of the most important roles played by the user manual is to help in solving problems with Omega DP26-TC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Omega DP26-TC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
