Instruction/ maintenance manual of the product 6100 3Com
Go to page of 14
3Com ® AirProtect Enterprise Engine 6100 Quick Setup Guide www.3Com.com Part Number: 10015863 Rev. AA June 2007.
3Com Corporation 350 Campus Drive, Marlborou gh, MA USA 01752-3064 Copyright © 2003 – 2007 3Com Corporation and its Licensors. All Rights Reserved. 3Com Corporation reserves the right to revise thi.
3Com AirProtect Enterprise Quic k Setup Guide 1 Step 1: 3Com AirProtect Enterprise Appliance and 3Com AirProtect Sensor Overview The front p.
3Com AirProtect Enterprise Quic k Setup Guide 2 Step 2: Mount the Appliance Place the appliance on the rack and mount the appliance using the rack moun ting accessories.
3Com AirProtect Enterprise Quic k Setup Guide 3 Step 3: Power up the Appliance Connect the power cable as shown in the figure below and pres s the power switch on the front panel of the appliance.
3Com AirProtect Enterprise Quic k Setup Guide 4 Step 5: Access 3Com AirProtect Enterprise A. Connect your computer to the same su bnet where the Server is connected. B. Change your computer IP address to 192.
3Com AirProtect Enterprise Quic k Setup Guide 5 Step 6: Complete the Server Initialization and Setup Wizard Follow the steps in the Server Initialization and Setup Wizard to configure the 3Com Air Protect Enterprise Server.
3Com AirProtect Enterprise Quic k Setup Guide 6 Step 7: Set up the Server DNS Entry Add a DNS entry ‘wifi ‐ securit y ‐ server’ in your organization’s/enterprise DNS server.
3Com AirProtect Enterprise Quic k Setup Guide 7 C. Type the default username: admin and password: password on the Login screen.
3Com AirProtect Enterprise Quic k Setup Guide 8 E. If you see the Welcome scree n, close the window. You are done with the Server Setup. You will revisit the Welcome screen later.
3Com AirProtect Enterprise Quic k Setup Guide 9 Step 9: Connect 3Com AirProtect Sensors to the Network Power and Connect to the Network A. Ensure that the 3Com AirProtect Enterprise Server is already running on your network.
3Com AirProtect Enterprise Quic k Setup Guide 10 Important! If the LED sta tus at the end of Step D does not match the status shown .
3Com AirProtect Enterprise Quic k Setup Guide 11 Step 11: Complete the 3Com AirProtect Enterprise System Setup Wizard Follow the steps in the System Setup Wizard to specify the 802.
3Com AirProtect Enterprise Quic k Setup Guide 12 Step 12: Enable Global Flags Event generation and intrusion prevention activati on flags are turned.
An important point after buying a device 3Com 6100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3Com 6100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3Com 6100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3Com 6100 you will learn all the available features of the product, as well as information on its operation. The information that you get 3Com 6100 will certainly help you make a decision on the purchase.
If you already are a holder of 3Com 6100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3Com 6100.
However, one of the most important roles played by the user manual is to help in solving problems with 3Com 6100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3Com 6100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
