Instruction/ maintenance manual of the product X3 3Com
Go to page of 12
Installation and Owner’ s Manual Model: X3 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation.
Component Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Wiring White 12-Pin Main Harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Black Chassis Ground Y ellow +12VDC Ignition Input Open No Connection Red +12VDC Battery Input HC4 12-Pin Main Harness Orange (-) Ground when Armed Output Green (-) Common Door Pin Input Violet (+) Co.
Parking Lights Only Piggyback Connection Headlight Switch White Wire 4 Brown Wire: (-) Siren Output Connect the brown wire to the Negative wire from an electronic siren (Siren Supplied). Connect t the remaining wire from the siren to +12 volt. (Battery +) The Brown wire can also be programmed for (-) horn honk output.
Wiring (continued) 5 HC3: Black 3-Pin Door Lock Harness Connect the Blue wire to the unlock wire from the door lock switch. If the door locking system is not a (-) trigger system, additional relays will be required.
6 87 87a 86 85 30 Brown Wire T o +12V T o Horn +12V or Ground Depending on System Requirements Fuse Red/White Wire: (When programmed for (-) Domelight Supervision Output) When Programmed for this function, the Red/White wire provides a (-) output to turn on the vehicles interior light when the alarm has been disarmed.
7 Step 3 Press the “Lock” button on the first transmitter until you hear a confirmation chirp/beep. The transmitter is now coded into the system. Repeat for each additional transmitter. When finished, turn Off the ignition key or wait for 15 seconds to get out of transmitter programming mode.
8 Alarm Feature Programming (continued) LED Flash/ Chirp (Default Setting) ” f f O “ ps r i h C ” n O “ ps r i h C 1 Manual Arming 2 Automatic Arming without Door Locking Ignition On/Off with .
9 1. Press the LOCK button to increase sensitivity by 1 step (1 chirp) 2. Press the UNLOCK button to decrease the sensitivity by 1 step (1 chirp) 3. Rap on the vehicle body panels and glass to achieve the proper setting. Note: If you hear 2 chirps while making an adjustment, you have reached the max setting.
10 + C. Dual-Zone Shock Sensor 1. Light impacts to the vehicle will cause a pre-warning (warn-away) chirp from the siren or horn. These light impacts will not set the alarm into full trigger even if they are repetitive. 2. Hard impacts to the vehicle will bypass the pre-warning indicator and activate a full alarm trigger.
11 Owners Manual (Continued) F. Manual Disarming “Unlock” 1. Press the “Unlock” button on the transmitter. 2. The siren will chirp twice and parking lights will flash twice indicating that the security system is now disarmed. The vehicle doors will unlock disarming when interfaced with the security system.
K. Anti Car-Jacking (Manual Activation) Warning: If you don’t need this alarm system’s car-jacking function to be “On”, set it to “Off”. The default car-jacking setting is “Off” (see Feature No.
An important point after buying a device 3Com X3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3Com X3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3Com X3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3Com X3 you will learn all the available features of the product, as well as information on its operation. The information that you get 3Com X3 will certainly help you make a decision on the purchase.
If you already are a holder of 3Com X3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3Com X3.
However, one of the most important roles played by the user manual is to help in solving problems with 3Com X3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3Com X3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
