Instruction/ maintenance manual of the product TE636W Meade
Go to page of 19
TE636W Slim W eather Forecaster with Indoor/ Outdoor T emperature and Humidity USER MANUAL.
INTRODUCTION Thank you for selecting a Meade Instruments W eather Forecaster . This device combines precise time keeping, monitoring and displaying of current temperature data from up to three remote locations (additional sensors are required).
INST ALLA TION Communications between the main unit (receiver) and the remote sensor (transmitter) is wireless. This allows you to greater flexibility in choosing the location of remote sensor . The remote transmits data up to 164 feet (50 meters) over an open, unobstructed area.
REMOTE TEMPERA TURE AND HUMIDITY SENSOR FEA TURES • Remote data transmission to the main unit via 433 MHz frequency • Single transmission channel • Case can be wall mounted using accessory hanger A. BA TTER Y COMP ARTMENT • Holds two AAA-size batteries B.
PLACEMENT • The remote sensor should be placed under eaves or a similar location with free air circulation, sheltered from direct sunlight and extreme weather . • Ideally , place the remote sensor over soil, rather than asphalt, which would cause false readings.
FRONT REAR A J K L B C G H D I F E 6.
A. WEA THER FORECAST/ PRESSURE window B. TEMPERA TURE/ HUMIDITY window C. CLOCK window D. DOWN button • Select the next available mode • Press and hold for 2 seconds to search for wireless signal from remote sensor .
K. BA TTER Y COMP ARTMENT • Requires two (2) CR2032 lithium cell batteries L. T ABLE ST AND • When placing the main unit on the table or other horizontal surface, unfold and adjust the table stand for the desired viewing angle. BA TTERY INST ALLA TION • Remove the battery door located at the back of the main unit.
PRESSURE OPERA TION The pressure window displays: current barometric pressure, sea level pressure, and weather forecast. The information contains a number of historical statistics: pressure/ temperatu.
New Moon W aning Crescent First Quarter W axing Gibbous Full Moon W aning Gibbous Last Quarter W aning Crescent CHANGING PRESSURE AND ALTITUDE UNITS • Press MODE as needed, until “LOCAL” pressure is displayed. • Press and hold MEM/ HISTOR Y , until the pressure unit is flashing.
Icon Status Searching for the signals from the remote sensor Corresponding remote sensor signal received successfully No signals received for over 1 hour REMOTE SENSORS ST A TUS The wave icon above th.
Indicator displayed COM WET DRY T emperature Range Humidity Range Shows current condition 20°C to 25°C (68°F to 77°F) 40%RH- 70%RH Ideal relative humidity and temperature -5°C to 50°C (23°F to1.
ICON Atomic Time Reception Str ength Undefined data (Flashing) No Reception for the past 24 hours W eak signal, but can be decoded Strong signal • The atomic clock receiver is programmed that it will search for the atomic time signal daily for 0:00, 3:00, 6:00, and 12:00 am.
CLOCK ALARMS There are two time alarms – Weekday alarm ( W ) and Single day alarm ( S ) - and one Ice Warning Alarm ( PRE-AL ). • If Weekday (W) alarm is activated, it will sound at the set time a.
Issue Main unit Radio Controlled T ime signal is not received Cannot locate remote sensor Cannot change the channel Data does not match data on the main unit Place unit by the window and keep it there.
SPECIFICA TIONS Main Unit Indoor T emperature Operating range: 23.0°F to 122.0°F (-5°C to +50°C) T emperature resolution: 0.2°F (0.1°C) User -selectable (°F or °C) temperature display Humidity.
FCC ST A TEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
ST ANDARD W ARRANTY INFORMA TION This product is warranted by Meade Instruments Corp. (MIC) to be free of defects in materials and workmanship for a period of ONE YEAR from date of original retail purchase in the U.
Meade Instruments Corp. 27 Hubble Irvine, CA 92618 U.S.A. © 2011 Meade Instruments Corp. All Rights Reserved. All user manual contents and information are subject to change.
An important point after buying a device Meade TE636W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Meade TE636W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Meade TE636W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Meade TE636W you will learn all the available features of the product, as well as information on its operation. The information that you get Meade TE636W will certainly help you make a decision on the purchase.
If you already are a holder of Meade TE636W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Meade TE636W.
However, one of the most important roles played by the user manual is to help in solving problems with Meade TE636W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Meade TE636W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
