Instruction/ maintenance manual of the product 1143 Lumiscope
Go to page of 12
User Manual Quick Read T echnology Model 1143 Automatic W rist Blood Pressure Monitor GF Health Products, Inc. Atlanta, Georgia 30360 Made and Printed In China 1143-INS-LAB-RevAA08.
.
Introduction ..................................................................... 3 About Blood Pressure ................................................ 4, 5 Parts Identification .......................................................... 6 Display Symbols & Explanations .
Intr oduction Congratulations on your purchase of the new Lumiscope Model 1 143. This automatic wrist blood pressure monitor is both easy-to-use and ideally suited for daily measurements.
What is Blood Pressure? Blood pressure is the pressure exerted on the artery tube while blood flows through the arteries. The pressure measured when the heart contracts and sends blood out of the heart is systolic (highest) blood pressure.
Blood Pressure Standard The World Health Organization (WHO) and National High Blood Pressure Education Program Coordinating Committee have developed a blood pressure standard, according to which areas of low- and high-risk blood pressure are identified.
Parts Identification 1. ST ART/ST OP 2. Memory Select 3. Battery Compar tment 4. Wrist Cuff 6 Clock Settings 17 Setting the Clock, Date & Time A. Press and hold the “MEMORY” button for over 3 seconds. The display will show a blinking year . Press the “ST ART/ STOP” button to adjust the year when it’s blinking.
2. T o delete all memories: Follow steps A and B above C. Press the “MEMORY” button until the display shows “DEL ALL”. D. Once the “DEL ALL” has been displayed, press and hold the “ST ART/STOP” button again. After 3 beeps, all records have been deleted.
Memory Recall 15 T o see the previously measured values A. Press the “MEMORY” button to recall the last reading. The LCD display will show the memory number , actual date and time simultaneously of the measurement.
Measur ement Pr ocedures 14 C. Quick Read T echnology detects your blood pressure with the touch of a button, which reduces measurement time significantly and decreases patient discomfort. Note: It is important to remain still and quiet during measurement.
T o apply the cuff A. Remove all watches, jewelry , etc. prior to attaching the wrist monitor . Clothing sleeves should be rolled up and the cuff should be wrapped on bare skin for correct measurements. B. Apply cuff to left wrist with palm facing up as Fig.
Helpful T ips 12 Here are a few helpful tips to help you obtain a more accurate reading. A. Do not measure your blood pressure immediately after consuming a large meal. To obtain more accurate readings, please wait one hour before measuring. B. Do not smoke or drink alcohol before measuring your blood pressure.
An important point after buying a device Lumiscope 1143 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lumiscope 1143 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lumiscope 1143 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lumiscope 1143 you will learn all the available features of the product, as well as information on its operation. The information that you get Lumiscope 1143 will certainly help you make a decision on the purchase.
If you already are a holder of Lumiscope 1143, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lumiscope 1143.
However, one of the most important roles played by the user manual is to help in solving problems with Lumiscope 1143. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lumiscope 1143 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
