
Manual
RV4500 AM / FM Stereo Multi-Media Receiver
® · 3-Beam Laser Pickup · ®



8 9 10 11
input devices.
FM 1, FM 2, FM 3, AM 1 and AM 2.
device via the 3.5mm audio/video input socket. Note: The RV4500 does not control the device, it just allows the audio/video to be played through the system.
14 15 16 · in Rear)


1 2 3 4
14 15 16 17 18 19 20
(AS) and Preset radio station scanning (PS). (See “AM/FM Operation” for more details). Disc: Press to display movie information.
VOL
AS/PS ELAPSE
appears in the display and the disc will play backwards at 2 times the normal speed. Press again and “BACKWARD X 4” will appear. X8 and X20 speeds can also be selected. Fast Forward button works the same way but fast forward. Press the ll button at any time to resume normal play.
to a lower or higher frequency. Disc Mode: Press to search for the beginning
or next track or chapter.
10/0 10+


Press the POWER button to turn the unit On/Off.
To select a play source, press one of the follow- ing mode buttons:
Press the DIM button to select the desired level of brightness for the display area.
Press the DISP button to display the clock. Press again to return to previous display.
Press and hold to perform clock setting functions (See “Setting the Clock” for more details).

Increase the volume by rotating the VOLUME knob clockwise. Decrease the volume by rotating the VOLUME knob counterclockwise.

Select the desired sound mode by pressing the VOLUME knob. The modes will be displayed in the fol- lowing order: Bass, Treble, Balance and Volume.
Select the Bass mode by pressing the VOLUME knob. Increase the Bass by rotating the VOLUME knob clockwise. Decrease the Bass by rotating the knob counterclockwise. After 6 seconds control reverts back to volume control.
Select the Treble mode by pressing the VOLUME knob. Increase the Treble by rotating the VOLUME knob clockwise. Decrease the Treble by rotating the knob counterclockwise. After 6 seconds con- trol reverts back to volume control.
Select the Balance mode by pressing the VOLUME knob. Adjust the Balance by rotating the knob. r -- L = Equal sound right and left r 7 = Right speaker only L 7 = Left speaker only
After 6 seconds control reverts back to volume control.
Press the EQ button to choose between the preset equalizer settings: Flat, Classic, Rock, Pop and Jazz as indicated in the display area.
To boost high and low tones at low volume levels, press and hold the EQ button until “LOUd On” appears in the display. To deselect, press and hold the EQ button again until “LOUd OFF” appears in the display.
Hold

Press the button to mute the volume level. Press the button again to restore the volume.
AUX AM/FM
O
Hold

Sleep Timer Operation
Setting the Sleep Timer:

Follow the procedures above except set the alarm time to 12:00 AM. When the display exits alarm timer programming the “ALM” will disappear from the display indicating the alarm has been cancelled.


Press the AM/FM button and “rAdIO” appears in the display. After a brief moment either AM or FM will appear in the display.
Press the AM/FM button repeatedly and select from FM 1, FM 2, FM 3, AM 1 or AM 2.
Band Indicator FM Stereo Indicator
Seek Tuning in a Radio Station:
Press and release the l button to tune in a lower radio station. Press and release the l button to tune in a higher radio station.
Press and hold the l button to manually tune in a lower radio frequency. Press and hold the l button to manually tune in a higher radio frequency.
Memorizing Radio Stations:

Disc Warnings
Do not touch the underside of the disc

Use a dry soft cloth to wipe disc the surface. If the disc is quite dirty, use a soft cloth slightly moist with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.
Wipe the disc from the center toward the outside edge
(although not enough to make it unusable) depending on handling and conditions in the usage environment.
Hold · Label side up · Do not bend

Press the l button to select a lower track. Press the l button to select a higher track. The track number will appear in the display.
Tracks can also be selected by using the remote control. Press the track selection num- ber button that corresponds to the track you want to play.
For example: If you want to play track 8, press button 8. Track 8 will start playing and “8” will appear in the display.
If you want to play track 12, press button 10+, fol- lowed immediately by button 2. Track 12 will start playing and “12” will appear in the display.
Track Number


Press the ll button on the remote control to pause the disc, press it again to resume play.
Press the button to stop the disc. To resume play, press the ll button.
Pressing the button 2 times, then pressing the ll button will play the disc from the begin- ning.
Continue to press the AS/PS button during music disc play to display the following disc information in this order:
Single Elapse, Single Remain, Total Elapse and Total Remain.

SPK A ST
Press the l button to select a lower file. Press the l button to select a higher file. The file number will appear in the display.
Files can also be selected by using the remote control. Press the file selection number button that corresponds to the file you want to play.
For example: If you want to play file 8, press but- ton 8. File 8 will start playing and “8” will appear in the display.
If you want to play file 12, press button 10+, fol- lowed immediately by button 2. Track 12 will start playing and “12” will appear in the display.
File Number

Press the ll button on the remote control to pause the disc, press it again to resume play.
MENU MODE
MUTE
SETUP VOL TONE
VOL
ENTER VOL
Stopping the Disc:
Press the button to stop the disc. To resume play, press the ll button.
MENU MODE
MUTE
SETUP VOL TONE
Pressing the button 2 times, then pressing the ll button will play the disc from the begin- ning.
ENTER VOL
Removing the Disc:




Press the ll button on the remote control to pause the movie, press it again to resume play.
MENU MODE
MUTE
SETUP VOL TONE
VOL
ENTER VOL
Stopping a Movie:
Press the button on the remote control to stop the movie. To resume play, press the ll button.
MENU MODE
MUTE
SETUP VOL TONE
Pressing the button 2 times. Then pressing the ll button and the movie will start playing from the beginning.
ENTER VOL
Movie Chapter Selection:
Press the l button to select a lower chapter. Press the l button to select a higher chap- ter. The chapter number will appear in the display.
Chapter selection can also be selected by using the remote control. Press the chapter selection number button that corresponds to the chapter you want to play.
For example: If you want to play chapter 8, press button 8 button.
If you want to play chapter 28, press the 10+ button twice followed immediately by button 8. Chapter 28 will start playing and “28” will appear in the display.
EJECT POWER
Press the (fast forward) or (backwards) button on the remote control during play. Each time the button is pressed the speed of fast for- ward/ backwards changes in the following order:
SETUP VOL TONE
VOL
2X, 4X, 8X, 20X
ENTER VOL
To resume normal play, press the ll (Play) button.
Chapter Number

VOL
Continue to press the SLOW button to play the movie is slow motion in the following order:
SF 1/2, SF 1/3, SF 1/4, SF 1/5, SF 1/6, SF 1/7, SB 1/2, SB 1/3, SB 1/4, SB 1/5, SB 1/6, SB 1/7
ZOOM SLOW
To resume normal play, press the ll (Play) button.
Zooming the Image:
VOL
To enlarge the on-screen image during disc play, press the ZOOM button. Each time the button is pressed, the magnification increment changes in the following order:
SEEK SCAN
ZOOM SLOW
2X, 3X, 4X, 1/2, 1/3, 1/4.
Use the navigation buttons to move the image on the screen.
Elapse Times:
Continue to press the AS/PS ELAPSE button during movie play to display the following information in this order for most discs: Title Elapse, Title Remain, Chapter Elapse, Chapter Remain and Display Off.
AS/PS ELAPSE
AUDIO SUB.TT
Subtitle Language Menu:
AS/PS ELAPSE
AUDIO SUB.TT
Audio Language Menu:
Press the AUDIO button during playback to review the current setting. Most movies have their own audio setup. Go to the on-screen menu to select appropriate audio/language setup.
AS/PS ELAPSE
AUDIO SUB.TT
10/0 10+ · 10/0 10+ · 10/0 10+

POWER
Press the SETUP button on the remote control to display the Setup Menu.
MUTE
SETUP VOL TONE
VOL
ENTER VOL
SYSTEM SETUP
TV SYSTEM TV TYPE PASSWORD RATING DEFAULT
System Setup Page:
Video Setup Page:
Use the navigation buttons to scroll between the menu items. Make a selection by pressing the ENTER button.
Use the navigation buttons to scroll between the menu items. Make a selection by pressing the ENTER button. Video Submenu Options:
Digital Setup Page:
Use the navigation buttons to scroll between the menu items. Make a selection by pressing the ENTER button. Language Setup Options:
Use the navigation buttons to scroll between the menu items. Make a selection by pressing the ENTER button. Digital Submenu Options:
Use the navigation buttons to scroll between the menu items. Make a selection by pressing the ENTER button. Audio Submenu Options:

Front Audio/Video Input:
Insert the 3.5mm jack from the audio/video device into the AV input socket on the front of the housing. Press the AUX button until “Av In F” appears in the display. Refer to the audio/ video device’s owner’s manual for proper operation.
Rear Audio/Video Input:
To select the rear input Audio/Video play source, press the AUX button until “Av In r” appears in the display. Refer to the audio/video device’s owners manual for proper operation.
Insert a 3.5mm headphone jack into the Headphone Output socket. Use the volume knob on the headphone to adjust the audio level.

The LCD display may fail to function normally due to the vehicle’s battery condition, and could require resetting the radio microprocessor if:
Should any of these conditions occur, simply press and release the RESET button on the radio front panel using the tip of a ball point pen. This will reset the radio microprocessor to the origi- nal factory settings. After pressing the RESET button you should recheck to see if the radio functions normally.
Reset Button

3/8”
61/4”
45/8”
9 3/4”

Right Speaker B Left Speaker B
White/Black Wire (Common -) _
Right Speaker A Left Speaker A
White Wire (Common -)



If an outside antenna is connected to the receiver, be sure the antenna system is grounded, so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electrical Code, ANSI/NFPS No. 70-1983, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See illustration below.
Example of Antenna Grounding as per National Electrical Code. Instructions Contained in Article 810-"Radio and Television Equipment"
Antenna Discharge Unit (C)
Ground Wire (A,B ) Grounding Clamps
Grounding Electrode Driven 8’ Into the Earth 2.44 Meters
A. Use No. 10 AWG (5.3mm2) copper, No. 8 AWG (8.4mm2) aluminum, No. 17 AWG (1.0mm2) copper clad steel or
bronze wire, or larger as ground wire. B. Secure antenna lead-in and ground wires to house with stand-off insulators spaced from 4 feet (1.22m) to 6 feet
(1.83m) apart. C. Mount antenna discharge unit as close as possible to where lead-in enters house.

ONE (1) YEAR LIMITED WARRANTY
Magnadyne Corporation or its authorized agents will within one year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found defective in materials or workmanship, when properly connected and operating on the correct power requirements designated for the specific product. This warranty and Magnadyne Corporation or its authorized agent’s obligations hereunder do not apply where the product was; damaged while in the possession of the consumer, subjected to unrea- sonable or unintended use, not reasonably maintained, utilized in commercial or industrial operations, or serviced by anyone other than Magnadyne Corporation or its authorized agents, or where the warning seal on the product is broken or the power and/or plugs are detached from the unit. Magnadyne Corporation or any of its authorized agents will not assume any labor costs for the removal and reinstallation of any product found to be defective, or the cost of transportation to Magnadyne Corporation or its authorized agents. Such cost are the sole responsibility of the purchaser. This warranty does not cover the cabinet appearance items or accessories used in connection with this product, or any damage to recording or recording tape, or any damage to the products resulting from improper installation, alteration, accident, misuse, abuse or acts of nature. MAGNADYNE CORPORATION OR ITS AUTHORIZED AGENTS SHALL NOT BE LIABLE TO ANYONE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OR CLAIMS EXCEPT THOSE ACCORDED BY LAW. NO EXPRESSED WARRANTY OR IMPLIED WARRANTY IS GIVEN EXCEPT THOSE SET FORTH HEREIN. NO IMPLIED WARRANTY SHALL EXTEND BEYOND ONE YEAR FROM THE DATE OF SALE. This warranty extends only to the original purchaser of the product and is not transferable. Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or conse- quential damages, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state.
“NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the User’s authority to operate the equipment.”
Defective merchandise should be returned to the original point of purchase or secondly, to Magnadyne Corporation, 1111 W. Victoria Street, Compton CA 90220. Return Authorization must be obtained before sending, or merchandise may be refused.

© Copyright 2011 Magnadyne Corporation
RV4500-UM Rev. A 4-27-11
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.