Instruction/ maintenance manual of the product DMC-10DS Linear
Go to page of 22
DMC-10 Structur ed Wir e Inter com System Installation and Operation Instructions (760) 438-7000 USA & Canada (800) 421-1587 & (800) 392-0123 Toll Free FAX (800) 468-1340 www.linearcorp.com PRINTER’S INSTRUCTIONS: INSTR,INSTL,DMC-10 - LINEAR P/N: 227592 A INK: BLA CK - MA TERIAL: 20 LB .
T able of Contents Introduction .............................................................................................. 1 Safety Information and Cautions ............................................................. 2 Explanation of Graphic W arning Symbols .
1 Intr oduction Li near’s M & S System s bran d Mode l DMC- 10 Struc tu red Wi ring In t erco m Sys t em of fe rs severa l advan ced fea tures n ever befo re availab le in a n in t erco m sys tem.
2 Safety Information and Cautions Explanation of Graphic W arning Symbols This symbol is intended to aler t the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that ma y be of suffi cient magnitude to constitute a risk of electr ic shoc k.
3 Safety Information and Cautions (Continued) Important Safety Notes PO WER SOURCE This unit should only be connected to a 110-120 V AC power source as marked on the unit. GROUNDING OR POLARIZA TION Do not defeat the saf ety purpose of the polarized or grounding-type plug.
4 Component Featur es SIGNAL OVERLOAD SIGNAL LEVEL ADJ. MUTE OUTPUT LEFT RIGHT DMC-10AWP AUDIO INPUT POWER CONNECTOR EXPAN S ION HUB CONNECTOR EXPAN S ION HUB S TATU S INDICATOR MUTE ENABLE S WITCHE S.
5 Installation System Design Evaluate the installation to determine locations for mounting the intercom components. The inter com hub mounts in a new or existing structured wiring enclosur e. The DMC-10RS r oom stations can be located in any rooms that r equir e communications.
6 Installation (Continued) Junction Box Installation Each intercom station mounts inside a standard 2-gang J-box. Mount the J-boxes fl ush with the drywall at locations and heights convenient for the installation.
7 Installation (Continued) Hub Wiring Use a T ype 110 punch-down tool (if using an impact tool, set the tool to “low” force!) to connect the Cat-5 cable from each station to the color coded connectors on the hub. Wire the door station(s) fi rst. The hub’ s station location number determines the sound of the door station’ s chime.
8 Installation (Continued) Optional Expansion Hub Installation T o increase the system’ s capacity , a second hub can be connected to the primary hub. The hubs connect to each other with up to 150 feet of Cat-5 cable. Each hub requir es its own power supply .
9 Installation (Continued) Hub Options The intercom hub has two banks of dipswitches. One bank enables or disables each door station’ s door release button. The other bank enables or disables each door or patio station’ s privacy mute and do- not-disturb feature.
10 General Operation Intercom Featur es Each room and patio station can be used for communication with other room, patio, or door stations. Also, r oom and patio stations featur e four special constant modes for room monitoring and privacy .
11 General Operation (Continued) Door to Room and Door to Patio Communications When visitors arrive, they push a door station button to announce their arrival. Pressing the door station’ s button sounds a chime on all stations (unless the station is set to Do-not-disturb Mode ).
12 General Operation (Continued) Room to Room and Room to Patio Communications A typical use for the system is to communicate between room stations throughout the installation and to patio stations. T alk Button T o communicate with other people at room or patio stations, pr ess and hold the room station’ s T ALK button while speaking.
13 General Operation (Continued) Patio to Room and Patio to Patio Communications A person at the patio station can make a call to the room stations, or another patio station. For security and privacy , the patio station will not trigger hands-free r eply fr om room or other patio stations.
14 Constant Modes Four special constant modes are available for r oom stations and patio stations. Each room and patio station can be set to one of the four modes.
15 Constant Modes (Continued) Monitor Mode Monitor Mode is typically used for monitoring a baby or other sounds in a room. When a r oom or patio station is set to Monitor Mode , the station’ s microphone is always on. Set other stations to Listen Mode (see below) to hear sounds from any station(s) set to Monitor Mode .
16 T roubleshooting SYMPTOM CAUSE SOLUTION No hub status indicators lit No power to hub Check power supply input & output voltage Hub station status indicator not lit on an installed station Wirin.
17 System Setup and Option Log ST A TION NUMBER TYPE LOCA TION DIPSWITCH OPTIONS 1 ❑ ROOM ST A TION ❑ P A TIO ST A TION ❑ DOOR ST A TION MUTE ❑ OFF ❑ ON DOOR RELEASE ❑ OFF ❑ ON 2 ❑ ROO.
18 Inter com Accessories & Kits DMC-10 Intercom Kits Model DMC-10Kit Contains four room stations with white faceplates, one door station with white faceplate, one system hub and power supply Model.
19 Limited W arranty Linear LLC warrants its M&S Systems brand products to be fr ee of defects for 2 years. The warranty period begins on either (a) the date of purchase or installation date of this pr oduct, or (b) the date of closing on a new residence in which this pr oduct was originally installed.
Copyright © 2007 Linear LLC 227592 A.
An important point after buying a device Linear DMC-10DS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Linear DMC-10DS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Linear DMC-10DS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Linear DMC-10DS you will learn all the available features of the product, as well as information on its operation. The information that you get Linear DMC-10DS will certainly help you make a decision on the purchase.
If you already are a holder of Linear DMC-10DS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Linear DMC-10DS.
However, one of the most important roles played by the user manual is to help in solving problems with Linear DMC-10DS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Linear DMC-10DS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
