EN
Linear logo
Official user manual

Linear 1092-07

1 pages·23 KB·Chipper·PDF·ENDEFRITNLJA
Linear 1092-07
Table of Contents 2 sections INSTALLATION INSTRUCTIONS · TO CONNECT A THREE-TAB RECEIVER: ShowHide
Page 1 of the Linear 1092-07 user manual — TO CONNECT A THREE-TAB RECEIVER:
Page 1 · click to enlarge
Page 1

INSTALLATION INSTRUCTIONS

The Model 1092 Power Adaptor Kit permits the connection of a three-tab radio control receiver to a garage door operator which does not conform to the three- terminal standard adopted by DORCMA. The operator may have only two terminals or the numbering sequence may be different.

TO CONNECT A THREE-TAB RECEIVER:

1. The push on receptacle on each wire is connected to the straight tab of the receiver terminals.
2. Each terminal is marked on the data label on the back of the receiver. Connect the wires to the receiver terminals as follows:

a. Receptacle with two wires (power transformer and push button wire) to terminal mark “1” or “24V”. b. Receptacle with second push button wire to terminal marked “2” or “relay”. c. Receptacle with remaining transformer wire to terminal marked “3” or “radio power”. 3. Connect the two spade lugs to the wall button terminals on the operator (terminals 1 and 2 on a three terminal operator). Plug the transformer into a 115 VAC outlet.

LINEAR CORPORATION 2055 Corte Del Nogal Carlsbad, California 92009

Copyright © 1999 Linear Corporation 216720 A

Power Adaptor Kit · Model 1092-07

Ask about the Linear 1092-07

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Linear 1092-07

Be the first to ask — other owners or our team will answer.

Original document

Linear 1092-07 manual PDF

1 pages·23 KB·Chipper·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…