Instruction/ maintenance manual of the product VS-350 Antunes, AJ
Go to page of 24
P/N 1010745 Rev . H 03/07 V ARIETY STEAMER Models VS-350 Owner ’ s Man ual M A N U F A C T U R I N G N U M B E R S : 9100700 9100710 9100712 9100714 9100720 A S D L I S T E CM O I N N I T A T C T I .
V ARIETY STEAMER 2 P/N 1010745 Rev . G 03/06 General The V ariety Steamer produces steam using plain tap water for quick heating and reconstituting of food items.
3 V ARIETY STEAMER P/N 1010745 Rev . G 03/06 Service/T echnical Assistance If you experience any problems with the installation or operation of your unit, contact your local Roundup Authorized Service Agency . They can be found in the service agency directory packaged with the equipment.
V ARIETY STEAMER 4 P/N 1010745 Rev . G 03/06 Throughout this manual, you will find the following safety words and symbols that signify important safety issues with regards to operating or maintaining your V ariety Steamer . W ARNING GENERAL W ARNING. Indicates informa- tion important to the proper operation of the equipment.
5 V ARIETY STEAMER P/N 1010745 Rev . G 03/06 • W ARNING ELECTRICAL SHOCK HAZARD. F AILURE TO FOLLOW THESE INSTRUCTIONS COULD RESUL T IN SERIOUS INJUR Y OR DEA TH. - E lectrical ground is required on this appli- ance. - Do not modify the power supply cord plug.
V ARIETY STEAMER 6 P/N 1010745 Rev . G 03/06 SPECIFICA TIONS Electrical Ratings Shipping Weight 63 lbs. (28 kg) Electrical Cord & Plug Configurations CAUTION All electrical connections must be in accordance with local electrical codes and any other appli- cable codes.
7 V ARIETY STEAMER P/N 1010745 Rev . G 03/06 Unpacking 1. Remove unit and all packing materials from ship- ping carton. 2. The unit should contain the following: • Owner ’s Manual • Authorized S.
V ARIETY STEAMER 8 P/N 1010745 Rev . G 03/06 CAUTION All electrical connections must be in accordance with local electrical codes and any other appli- cable codes. W ARNING ELECTRICAL SHOCK HAZARD. F AILURE TO FOLLOW THE INSTRUCTIONS IN THIS MANUAL COULD RESUL T IN SERIOUS INJUR Y OR DEA TH.
9 V ARIETY STEAMER P/N 1010745 Rev . G 03/06 STEAMING GUIDE The V ariety Steamer makes it possible to expand a menu with just one piece of equipment. The V ariety Steamer produces a super-heated dry steam. This steam penetrates the product until the product’ s temperature matches the steam temperature.
V ARIETY STEAMER 10 P/N 1010745 Rev . G 03/06 OPERA TION Operator Controls ROCKER SWITCH (POWER ON/OFF) When the Rocker Switch (Power On/OFF) is in the ON position, the Control Board is activated. If the genera- tor temperature is below the factory preset setpoint, power is applied to the generator until the setpoint temperature is reached.
1 1 V ARIETY STEAMER P/N 1010745 Rev . G 03/06 UP & DOWN ARROW BUTTONS The actual generator temperature can be viewed by depressing the UP arrow button (Figure 3) at any time. The arrow buttons are used with the other buttons to program the unit (see the Programming section of this manual for more information).
V ARIETY STEAMER 12 P/N 1010745 Rev . G 03/06 General Programming CYC (T otal Cycle Time) refers to the total amount of cooking time set for the product (Figure 4). RA TE (Shot Interval Time) is the time set between each shot of steam during a complete cycle (Figure 5).
13 V ARIETY STEAMER P/N 1010745 Rev . G 03/06 UP DOWN PR OGRA M SING LE SHO T 1 2 3 4 S H O T Figure 6. SHOT Mode on Menu 1 UP DOWN PR OGRA M SING LE SHO T 1 2 3 4 0 0 : 1 0 Figure 7. Programming Mode SINGLE SHOT Button Used for Saving All Changed Settings.
V ARIETY STEAMER 14 P/N 1010745 Rev . G 03/06 the steam generator hole. T ake a suitable 1/16” punching tool (such as a paperclip) and fully insert it through all 18 orifices in the black manifold as well as through the 10 orifices in the spray tube.
15 V ARIETY STEAMER P/N 1010745 Rev . G 03/06 4. Wearing protective eyewear and gloves, pour delimer solution (not supplied) onto the generator surface (Figure 8). Be sure to follow the delimer manufacturer ’s directions for proper mixture and use. Figure 8.
V ARIETY STEAMER 16 P/N 1010745 Rev . G 03/06 Diagnostics The four-channel controller is also equipped with diag- nostic features. Listed under each drawing is a brief description of the particular feature. Also contained in the control housing mounted on the control board are diagnostic LED’s.
17 V ARIETY STEAMER P/N 1010745 Rev . G 03/06 UP DOWN PR OGRA M SING LE S HOT 1 2 3 4 SHOT PWR (Power) will be displayed when the supply volt- age is lower than 160 V olts AC or above 265 V olts AC. PWR UP DOWN PR OGRA M SING LE S HOT 1 2 3 4 SHOT OPEN will be displayed when the thermocouple is “open” or not installed correctly .
V ARIETY STEAMER 18 P/N 1010745 Rev . G 03/06 T echnical Theory of Operation When the Rocker Switch (power On/Off) is ON, line voltage flows to the primary side of the step down transformer . The transformer ’s secondary side supplies 12 and 24 V AC to the Control Board.
19 V ARIETY STEAMER P/N 1010745 Rev . G 03/06 TROUBLESHOOTING W ARNING T o avoid possible personal injury and/or damage to the unit, inspection, test and repair of electrical equip - ment should be performed by qualified service personnel. The unit should be unplugged when servicing, except when electrical tests are required.
V ARIETY STEAMER 20 P/N 1010745 Rev . G 03/06 TROUBLESHOOTING (continued) Problem Prossible Cause Corrective Action Unit heats but there is little or no steam produced and/or The product requires more steaming than usual (continued). Improper water pressure to unit.
21 V ARIETY STEAMER P/N 1010745 Rev . G 03/06 WIRING DIAGRAM # BLK RED BLK BRN ORG GRN YEL T10 T9 T8 T7 T6 T5 T1 T2 T3 T4 4- 3+ 1 2 RED YEL BLUE ORG BLK # BRN # # # T11 BLK BLK WHT BLK WHT 230V SOLENOID 4 2 WHT 6 8 5 1 10 TRANSFORMER BLK WHT CORD BLOCK POWER TERMINAL GRN GND SWITCH POWER 1 2 4 5 # # BOARD SWITCH BOARD S.
V ARIETY STEAMER 22 P/N 1010745 Rev . G 03/06 41 39 40 42 21 33 22 47 29 48 27 24 25 26 28 49 1 1 10 51 52 50 9 55 53 54 7 15 14 13 12 36 23 1 8 37 38 3 5 8 19 45 44 46 17 18 16 58 59 2 4 6 Available .
23 V ARIETY STEAMER P/N 1010745 Rev . G 03/06 REPLACEMENT P ARTS (continued) Item Part Description Qty . No. Item Part Description Qty . No. 1 001 1539 T op Housing Assy . (Jumbo) 1 2 7000404 Generator Manifold (incl. #66 & 67) 1 3 0200187 O-Ring 1 4 0020947 Drip Tray Assy .
LIMITED W ARRANTY Equipment manufactured by Roundup Food Equipment Division of A.J. Antunes & Co. has been con- structed of the finest materials available and manufactured to high quality standards.
An important point after buying a device Antunes, AJ VS-350 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antunes, AJ VS-350 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antunes, AJ VS-350 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antunes, AJ VS-350 you will learn all the available features of the product, as well as information on its operation. The information that you get Antunes, AJ VS-350 will certainly help you make a decision on the purchase.
If you already are a holder of Antunes, AJ VS-350, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antunes, AJ VS-350.
However, one of the most important roles played by the user manual is to help in solving problems with Antunes, AJ VS-350. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antunes, AJ VS-350 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
