Instruction/ maintenance manual of the product AXXRSBBU6 Intel
Go to page of 14
Intel ® RAID Smart Battery AXXRSBBU6 User’s Guide Order Number: E33722-001.
ii Warranty Notice: Adding a battery on an Intel RAID controller will limi t the warranty of this product. Returns determined to be caused by battery installation damage, stripped screws, or ot her damage resulting from the bat tery installation will not be covered.
iii Content s List of Figures ..................................................................................................... iv List of Tables .....................................................................................................
iv List of Figures Figure 1. Top and Bottom View of the AXXRSBBU6 ................................................................... 3 Figure 2. Battery alignment on the add-in Intel ® RAID Controllers .............................................. 5 Figure 3.
1 Intel® RAID Smart Battery User’s Guide About the Intel ® RAID Smart Battery Intel ® RAID Controllers and Intel ® Integrated Server RAID Modules provide reliability, high performance, and fault-tolerant disk subsystem management.
2 Intel® RAID Smart Battery User’s Guide Important Safety Instructions Read all caution and safety statements in this docum ent before performing any of the instructio ns. See Intel Server Boards and Server Chassis Safety Information at http://support.
3 Installing the AXXRSBBU6 Figure 1 displays the top and bottom views of the AXXRSBBU6. The battery pack is mounted on a daughtercard which mounts to the RAID controller. Take note of the location of the J2 conne ctor (5) which plugs into the Intel ® RAID Controller and the 3 standoffs (2) and 6 screws (3).
4 Important Pre-installatio n Considerations Warning: Always ground yourself and/or use a ground strap befor e touching the RAID controller or the RSBBU. Perform all installation work at an ESD-safe workstation. Use an ESD-safe Phillips screwdriver set to a maximum torque of 2.
5 4. Remove the protective metal cover from the battery connector on the RAID controller card. (J10 on the Intel ® SRCSASBB8I and Intel ® SRCSASLS4I.) 5. On the Intel ® RAID Controller SRCSASBB8I and the Intel ® RAID Controller SRCSASLS4I, place the RAID controller with the components facing up.
6 Caution: Center the screwdriver ca refully to avoid stripping the screwhead. Do not over-tighten th e screws. The maximum re commended torque is 2.25 inch pounds. C. Place the Intel ® RAID Controller back into the server 1. Align the RAID controller with the PCI Express* slot.
7 Monitoring Battery Backup Multiple utilities are available to display and configure BBU information including recharge count. When you replace a BBU, you should reset this count er to zero. Intel recommends that you replace the BBU once per year or after 500 recharge cycles, whichever comes first.
8 Most of the Battery Module properties are view-only. In the lower right panel of the RAID BIOS Console there are two properties that can be changed. (Intel recommends that you leave these properties at their default settings.
9 • The current BBU temperature, voltage, current, and remaining capacity • The estimated time until the battery is fully charged (only if the battery is charging) Replacing Battery Backup Unit s Intel recommends that you replace BBUs once a year or after 500 recharging cycles, whichever comes first.
10 Battery Backup Unit S pecifications Table 1. Battery Backup Unit Specif ications Battery Technology LiON (Lithium ION) 1 cell Battery Operating Environment 10–45°C ambient temperature 20% to 80%.
An important point after buying a device Intel AXXRSBBU6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel AXXRSBBU6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel AXXRSBBU6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel AXXRSBBU6 you will learn all the available features of the product, as well as information on its operation. The information that you get Intel AXXRSBBU6 will certainly help you make a decision on the purchase.
If you already are a holder of Intel AXXRSBBU6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel AXXRSBBU6.
However, one of the most important roles played by the user manual is to help in solving problems with Intel AXXRSBBU6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel AXXRSBBU6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
