Instruction/ maintenance manual of the product PD10E-X-X Ingersoll-Rand
Go to page of 8
INGERSOLL RAND COMP ANY L TD P .O . BOX 151 ONE ARO CENTER BR Y AN, OHIO 43506-0151 (800) 276-4658 F AX (800) 266-7016 © 2009 CCN 15244940 OPERA T OR’ S MANU AL PD10E- X- X INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 6-15-05 REVISED: 5-25-09 (REV .
Page 2 of 8 PD10E-X -X (en) EX CESSIVE AIR PRESSURE ST A TIC SPARK HAZARDOUS MA TERIALS HAZARDOUS PRESSURE W ARNING EX CESSIVE AIR PRESSURE. Can cause per- sonal injury , pump damage or property damage. Do not exc eed the maximum inlet air pressure as stated on the pump model plat e.
PD10E-X -X (en) Page 3 of 8 Page 3 of 8 GENERAL DESCRIPTION The ARO diaphragm pump oers high volume deliver y even at low air pr essure an d a broad rang e of material comp atibility options available. Refer to the model and option chart. ARO pumps feature stall resistant design, modular air motor / uid sections.
Page 4 of 8 PD10E-X -X (en) FL UID SECTION SERVICE KITS (637396-X X) KITS INCL UDE: BALLS (see Ball O ption, ref er to -X X in Service Kit char t below), DIAPHRAGMS (see Diaphr agm Option, refer to - XX in Service Kit char t below), and items 19, 33, 70, 144, 175 and 180 (listed below) plus 174 and 94276 L ubriplate F ML-2 gr ease (page 6).
PD10E-X -X (en) Page 5 of 8 Page 5 of 8 TORQU E REQUIREMENTS LUBRICA TION / SEALANTS Lubriplate FML-2 is a white food grade petroleum grease. cups & mating parts.
Page 6 of 8 PD10E-X -X (en) P ARTS LIST / PD10E-X -X AIR SECTION AIR MO T OR SEC TION SERVICE Ser vice is divided into two parts − 1. Pilot V alve, 2. Major V alve. GENERAL REASSEMBL Y NOTES: Air Motor Section Ser vice is continued from F luid Section repair .
PD10E-X -X (en) Page 7 of 8 Page 7 of 8 TORQUE REQUIREMEN TS ALL F ASTENERS ARE METRIC. LUBRICA TION / SEALANTS Apply anti-seize compound to threads at assembly . Apply Lubriplate FML-2 grease to “O" rings, ”U" Cups & mating parts. NOTE: DO NOT OVERTIGHTEN F ASTENERS.
Page 8 of 8 PD10E-X -X (en) PN 97999-1159 TROUBLE SHOO TING Product discharged from e xhaust outlet. Check for diaphrag m rupture. Check tightness of (6) diaphragm scr ew . Air bubbles in product discharge. Check connections of suction plumbing. Check“O” rings bet ween intake manifold and inlet side uid caps.
An important point after buying a device Ingersoll-Rand PD10E-X-X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ingersoll-Rand PD10E-X-X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ingersoll-Rand PD10E-X-X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ingersoll-Rand PD10E-X-X you will learn all the available features of the product, as well as information on its operation. The information that you get Ingersoll-Rand PD10E-X-X will certainly help you make a decision on the purchase.
If you already are a holder of Ingersoll-Rand PD10E-X-X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ingersoll-Rand PD10E-X-X.
However, one of the most important roles played by the user manual is to help in solving problems with Ingersoll-Rand PD10E-X-X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ingersoll-Rand PD10E-X-X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
