Instruction/ maintenance manual of the product PD03P-XXX-XXX Ingersoll-Rand
Go to page of 12
OPERA T OR’S MANU AL PD03P - X X X -X X X INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 12-17-05 REVISED: 5-13-10 (REV . 05) 3/8” DIAPHRA GM PUMP 1:1 RA TIO , NON-MET ALLIC READ THIS MANUAL CAREFULL Y BEFORE INST ALLING, OPERA TING OR SERVICING THIS EQUIPMENT .
Page 2 of 12 PD03P-X XX- XXX (en) EXCESSIVE AIR PRESSURE S T A TIC SPARK HAZARDOUS MA TERIALS HAZARDOUS PRESSURE W ARNING EX CESSIVE AIR PRESSURE. C an cause per- sonal injury , pump damage or property damage. Do not ex ceed the maximum inlet air pr essure as stated on the pump model plate .
PD03P-X XX- XXX (en) Page 3 of 12 GENERAL DESCRIPTION The ARO diaphragm pump off ers high volume delivery even at low air pressur e and a broad range of material compatibility options available. Ref er to the model and option chart. ARO pumps feature stall r esistant design, modular air motor / uid sections.
Page 4 of 12 PD03P-X XX- XXX (en) n 637429-X X Fluid Section ser vic e kits include: Balls (see BALL OPTION, refer to - XX in chart below), Diaphragms (See DIAPHRAGM OPTION, refer to - XX in chart below) and item 19 (listed below), plus items 144, 174 and 94276 Lubripla te® grease (page 6) .
PD03P-X XX- XXX (en) Page 5 of 12 Figure 3 FOR THE AIR MOTOR SECTION SEE P AGES 6 & 7 COLOR CODE DIAPHRAGM BALL MA TERIAL COLOR COLOR Hytrel Cream Black ( ) Santoprene T an T an Viton Y ellow ( ) Yellow ( ) ( ) Dot ASSEMBL Y TORQUE REQUIREMENTS LUBRICATION / SEALANTS NOTE: DO NOT OVERTIGHTEN FASTENERS.
Page 6 of 12 PD03P-X XX- XXX (en) p Indicates parts included in 637428 Air Sec tion Repair Kit . Item Description (size) Qty Part No . [Mtl] Item Description (size) Qty P art No.
PD03P-X XX- XXX (en) Page 7 of 12 PILOT V AL VE P ARTS Figure 4 ASSEMBL Y TORQUE REQUIREMENTS NOTE: DO NOT OVERTIGHTEN F ASTENERS. (123) screw , 4 - 6 in. lbs (0.45 - 0.68 Nm). Apply Lubriplate (94276) to all “O" rings, ”U" cups and mating parts.
Page 8 of 12 PD03P-X XX- XXX (en) TROUBLE SHOO TING Product discharged from air e xhaust. Check for diaphragm ruptur e. Check tightness of (6) diaphragm nut. Air Bubbles in product discharge. Check connections of suction plumbing. Check “O” rings between intake manifold and uid caps.
PD03P-X XX- XXX (en) Page 9 of 12 A C CESSORIES Figure 6 67388 W ALL MOUNT BRACKET ASSEMBL Y 96507 Wall Mount Bracket Y13-3-T Washer (3) (3/16") Y14-10-S Lock Washer (3) (#10) Y154-52-S Cap Screw.
Page 10 of 12 PD03P-X XX- XXX (en).
PD03P-X XX- XXX (en) Page 11 of 12.
Page 12 of 12 PD03P-X XX- XXX (en) PN 97999-1180.
An important point after buying a device Ingersoll-Rand PD03P-XXX-XXX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ingersoll-Rand PD03P-XXX-XXX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ingersoll-Rand PD03P-XXX-XXX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ingersoll-Rand PD03P-XXX-XXX you will learn all the available features of the product, as well as information on its operation. The information that you get Ingersoll-Rand PD03P-XXX-XXX will certainly help you make a decision on the purchase.
If you already are a holder of Ingersoll-Rand PD03P-XXX-XXX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ingersoll-Rand PD03P-XXX-XXX.
However, one of the most important roles played by the user manual is to help in solving problems with Ingersoll-Rand PD03P-XXX-XXX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ingersoll-Rand PD03P-XXX-XXX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
