Instruction/ maintenance manual of the product 7600 HP (Hewlett-Packard)
Go to page of 33
HP Scanj et 7 6 00 -ser i es doc ument f latbed scanner Us er's manual.
HP Scanjet 7600 series scanner User's manual.
Copyright and license © 2005 Copyright Hewlett-Packard Development Company, L.P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice.
Contents 1 How to use the scanner .......... ........... .......... ............... .......... ............. .......... .......2 Scanner setup and initialization .. ....... ......... ................... ............... ................ .........2 Where to get additional information .
1 How to use the scanner This manual describes how to use the HP Scanjet 7600 series scanner and its accessories, resolve installation problems, and reach customer support. Scanner setup and initialization To set up your scanner and install the scanning software, see the Setup Poster shipped with your scanner.
Note At least one of the above software options from CD 1 must be installed in order to scan. Both solutions can be installed. Other software may also be included on CD 1.
Front panel buttons Icon Feature name Description Scan Document button Scans an original document to the document management program included on CD 2, if installed. If this program is not installed the scan will be saved to a file. Scan Picture button Scans pictures, graphics, slides, or negatives to the HP Image Zone.
Automatic document feeder (ADF) The scanner has an automatic document feeder (ADF) that you can use to scan multiple documents quickly and easily. For more information about the ADF, see How to scan from the automatic document feeder .
Select original type — document or picture You have two choices for original type: Document or Picture . The scanner optimizes settings based on your choice.
click Done . After you click Done , the software sends the scanned file to the specified location. Note If Show Preview was selected, you must click the Accept button in the preview screen to initiate the scan. When prompted, click Yes to scan additional pages, or click No to send the scanned page(s) to the specified location.
Save a document to a drive, disk, or CD Use the File Documents button ( ) to save scanned documents to a disk, such as a hard drive, or a recordable CD.
The front panel Copy button is optimized to scan and print a duplicate of what is on the scanner glass. If you wish to change the image, such as lighten, darken, or adjust size, use the Make Copies button on the HP Director. 1 Place the original face down on the scanner glass, as indicated by the reference marks, or face-up in the ADF.
2 How to scan from the automatic document feeder This section explains how to use the automatic document feeder (ADF) for the HP Scanjet 7600 series scanner. Choose acceptable media for the ADF The ADF works best when the originals meet the following specifications.
Scan two-sided documents from the ADF 1 Load your originals. See Load originals in the ADF . 2 Open HP Director. Click the Scan Document button in HP Director. 3 The HP Scanning dialog box appears. 4 Under Would you like to scan both sides of the original(s)? select Yes, scan both sides , and then click Scan .
3 How to scan slides and negatives This section contains information about setting up and using the transparent materials adapter (TMA) to scan slides and negatives.
TMA cable and port 4 Gently insert the connector into the TMA port. Caution Do not force the cable into the TMA port. Forcing the cable can bend or break internal pins. 5 Reconnect the power cable. Scan slides or negatives To scan standard 35 mm slides or negatives, use the transparent materials adapter (TMA) light source and the positioning plate.
Note Make sure that the shiny side of the slide faces the scanner glass when the TMA light source is in position on the scanner glass. (The emulsion side is dull.) 2 If you are scanning fewer than three slides, insert the slide light shield after you load the last slide.
Complete the scanning process 1 Place the transparent materials adapter (TMA) light source into the positioning plate with the slides or negatives facing down. The TMA cable should fit in the groove that is on the same end of the positioning plate as the reference marks.
Find troubleshooting information For more information about resolving issues related to the TMA, and scanning slides or negatives, go to the onscreen Help in HP Director. Click Director Help and in the Contents tab, click the HP Scanjet 7600 series scanner heading.
4 Care and maintenance Occasional cleaning of your scanner helps ensure optimal performance. The amount of care necessary depends upon several factors, including the amount of use, the type of media that is fed through the automatic document feeder (ADF), and the environment.
several times per week, monthly cleaning is recommended. Set up a cleaning routine that is appropriate for your scanner. See Clean and Maintain the ADF in the Care and maintenance section of the HP Scanjet 7600 series onscreen Help for more details.
5 Troubleshooting This section contains solutions for common problems with the scanner, the automatic document feeder (ADF), and the transparent materials adapter (TMA). Scanner installation or setup problems This section contains solutions for installation and setup problems.
Cable type Action cable to the scanner and then turn on the computer, in that order. USB cable The USB cable is connected between the scanner and the computer. ● Use the cable that was included with the scanner. Another USB cable might not be compatible with the scanner.
The carriage on the scanner will move forward and backward approximately 25 mm (1 inch), and the lamp will turn on. If the carriage does not move and the scanner lamp does not turn on, a problem might exist with the scanner hardware. See Product support .
Additional troubleshooting information To solve other problems with the scanner, see the onscreen Help. To gain access to the Help, open HP Director , click Help , and then click HP Scanjet 7600 series scanner Help.
6 Product support This section contains support information, including phone numbers and Web site information. Accessibility Web site Customers with disabilities can get help by visiting ww w.hp.c om/hpinfo/community/ accessibility/prodserv/ . HP Scanjet Web site Visit www.
while you are in front of your computer and scanner. For faster service, please be prepared to provide the following information: – the scanner model number (located on the scanner) – the scanner .
Country/Region Phone number Austria +43 (0) 820 87 4417 Bahrain 800 00 171 (within country toll free) Belgium +32 070 300 005 (Dutch) +32 070 300 004 (French) Czech Republic +42 (0) 2 6130 7310 Denmark +45 70202845 Egypt +20 2 532 5222 Finland +358 (0)203 66 767 France +33 (0) 8 92 69 60 22 (Euro 0.
Country/Region Phone number +27-11 258 9301 (Outside RSA) Spain +34 902 010 059 Sweden +46 (0) 77-120 4765 Switzerland +41 0848 672 672 (German, French, Italian – Peak time 0.
Country/Region Phone number Hong Kong SAR +852 2802 4098 India 1 600 447737 Indonesia +62 (21) 350 3408 Jamaica 0-800-7112884 Japan 0570 000 511 (inside Japan) +81 3 3335 9800 (outside Japan) Korea, R.
7 Regulatory information and product specifications This section contains regulatory information and product specifications for the HP Scanjet 7600 series scanner and accessories. Scanner specifications Name Description Scanner type Flatbed with automatic document feeder (ADF) and transparent materials adapter (TMA) Weight with ADF 5.
Name Description Size 287 mm x 84 mm x 50 mm (11.3 x 3.3 x 1.97 inches) Weight 346 g (0.763 lbs) Power requirements 1.0 Amps, 24 Volts, 24 watts< (supplied by scanner) 925 mA, 22 watts (peak) 700 mA, 17 watts (nominal) Automatic document feeder (ADF) specifications Name Description Size 475 mm x 320 mm x 92 mm (18.
Chapter 7 30 HP Scanjet 7600 series scanner.
An important point after buying a device HP (Hewlett-Packard) 7600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) 7600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) 7600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) 7600 you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) 7600 will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) 7600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) 7600.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) 7600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) 7600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
