Instruction/ maintenance manual of the product 4822 Hobart
Go to page of 8
701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com F-35109 (July 2005) MODEL 4822 CHOPPER ML-136125 ML-136126.
– 2 – © HOBART, 2005 Installation, Operation and Care of MODEL 4822 CHOPPER SA VE THESE INSTRUCTIONS GENERAL The 4822 Chopper uses a 1 1 / 2 horsepower motor. It will grind 16 lbs. per minute, first cutting, through a 1 / 8 " plate. The 4822 Chopper, with funnel-shaped cylinder, will grind 20 to 22 lbs.
– 3 – INST ALLA TION UNPACKING Remove the carton from around the machine. Remove the four bolts holding the machine to the skid. Unpack the chopper cylinder assembly.
– 4 – CLEANING WARNING : UNPLUG CHOPPER POWER CORD BEFORE CLEANING. The chopper must be thoroughly cleaned and sanitized after installation and before being placed into service.
– 5 – ASSEMBL Y Check to assure the hub and hub drive are clean and clear of any obstruction. Insert the cylinder assembly with a slight twisting motion toward the left. The cylinder stop pin will contact the side of the hole that receives it. Tighten the thumb screw.
– 6 – MAINTENANCE WARNING : UNPLUG CHOPPER POWER CORD BEFORE CLEANING, SERVICING OR REMOVING PARTS. REPLACE PARTS BEFORE USE. MACHINE CLEAN UP The machine should be thoroughly cleaned at the end of an operating day or after being idle for an extended period of time.
– 7 – NO TES.
– 8 – FORM 35109 (July 2005) PRINTED IN U.S.A. NO TES.
An important point after buying a device Hobart 4822 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart 4822 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart 4822 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart 4822 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart 4822 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart 4822, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart 4822.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart 4822. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart 4822 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
