Instruction/ maintenance manual of the product 4246 Hobart
Go to page of 8
701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com FORM 34821 (Aug. 2002) MODEL 4246 MIXER-GRINDER 4246S STANDARD (5 HP/1 HP) ML-134216 4246HD HEAVY DUTY (7.
– 2 –.
– 3 – Operation and Care of the MODEL 4246 MIXER-GRINDER SA VE THESE INSTRUCTIONS GENERAL The Model 4246 Mixer-Grinder is designed to use #32-size knife and plate assemblies (not included with the unit). The Model 4246 is equipped with two drive systems.
– 4 – INST ALLA TION UNPACKING Immediately after unpacking the mixer-grinder, check for possible shipping damage, If the mixer- grinder is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery. Remove the packing box by loosening and removing the four bolts through the wooden skid.
– 5 – PNEUMATIC FOOT SWITCH To install the pneumatic foot switch: 1 . Remove screws from the lower front panel. PL-41742 PL-41743 Fig. 2 Fig. 3 2 . On the front of the machine, locate the lower frame rail; approximately 4" (10.2 cm) from the left side, is a knockout hole for the foot switch control hose.
– 6 – CHECK MOTOR ROTATION With the grinder cylinder in place and the hopper lid closed, check the rotation. Standing in front of machine, push the MIX/GRIND START button. Check that the mixing arm and worm rotate counterclockwise; press the STOP button to stop rotation.
– 7 – ASSEMBLY AND USE Do not use a plate with hole size smaller than 3 / 32 ". Before using the grinding cylinder, take it apart and wash it thoroughly. (See Cleaning instructions.) Hand-tighten the end ring. Overtightening will damage unit.
– 8 – 3 . Loosen the two retaining nuts, and remove the mixing arm pilot bushing assembly. Rotate and remove the bushing retainer. Disengage and pull mixing arm from the square drive and lift the arm from the hopper. 4 . Wash machine with hot water or steam.
An important point after buying a device Hobart 4246 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart 4246 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart 4246 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart 4246 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart 4246 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart 4246, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart 4246.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart 4246. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart 4246 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
