Instruction/ maintenance manual of the product 98733 Harbor Freight Tools
Go to page of 16
21° ANGLE FRAMING NAILER 98733 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2008 by Harbor Freight T ools ® .
SKU 98733 For technical questions, please call 1-800-444-3353. Page 2 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures.
SKU 98733 For technical questions, please call 1-800-444-3353. Page 3 Keep bystanders, children, and c. visitors away while operating the tool. Distractions are able to result in the loss of control of the tool. Personal safety Stay alert. Watch what you are do- a.
SKU 98733 For technical questions, please call 1-800-444-3353. Page 4 Fire nails into an appropriate work e. surface only . Do not attempt to re nails into surfaces too hard to pen- etrate. Do not drive nails on top of other nails, or at too steep an angle.
SKU 98733 For technical questions, please call 1-800-444-3353. Page 5 pressure or within the rated pressure range as marked on the tool ( 70 to 120 PSI ). Always verify prior to using the tool that the air source has been adjusted to the rated air pressure or within the rated air-pressure range.
SKU 98733 For technical questions, please call 1-800-444-3353. Page 6 those dust masks that are specially designed to lter out microscopic particles. (California Health & Safety Code § 25249.5, et seq. ) T ake caution, as some woods contain 3.
SKU 98733 For technical questions, please call 1-800-444-3353. Page 7 FUNCTIONAL DESCRIPTION Specications Working Air Pressure Range 70-120 PSI * (Depending on nail length and wood density) Air Inlet 1/4” -18 NPT Nail T ype .
SKU 98733 For technical questions, please call 1-800-444-3353. Page 8 ponents, such as a connector and quick coupler , will make operation more efcient, but are not required. W ARNING! TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: Do not install a female quick coupler on the tool.
SKU 98733 For technical questions, please call 1-800-444-3353. Page 9 OPERA TING INSTRUCTIONS Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
SKU 98733 For technical questions, please call 1-800-444-3353. Page 10 to perform in the manner explained in bold, have it repaired by a quali- ed service technician. W ARNING! Disconnect the Nailer from the air compressor when- ever loading or servicing.
SKU 98733 For technical questions, please call 1-800-444-3353. Page 1 1 Clearing Jams W ARNING! Anytime any maintenance or repairs are done (including clearing jams), wear ANSI-approved impact safety goggles and appro- priate hearing protection. THEN: Disconnect the Framing Nailer 1.
SKU 98733 For technical questions, please call 1-800-444-3353. Page 12 USER-MAINTENANCE INSTRUCTIONS Procedures not specically explained in this manual must be performed only by a qualied technician.
SKU 98733 For technical questions, please call 1-800-444-3353. Page 13 T roubleshooting Problem Possible Causes Likely Solutions Air leaking in Cylinder Cap (8A). Loose Screw (6). 1. O-ring (9A) is cracked or worn. 2. T ighten and recheck. 1. Replace O-ring.
SKU 98733 For technical questions, please call 1-800-444-3353. Page 14 Part Description 1 Screw 2 Spring W asher 3 Bushing 4 Exhaust Cover 5 Seal 6 Screw 7 Spring W asher 8A Cylinder Cap 9A O-ring sealing 10 W asher 11 V alve Seat 12 Spring 13 O-Ring (M57.
SKU 98733 For technical questions, please call 1-800-444-3353. Page 15 ASSEMBL Y DIAGRAM Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only , and are not avail- able individually as replacement parts.
SKU 98733 For technical questions, please call 1-800-444-3353. Page 16 LIMITED 1 YEAR W ARRANTY Harbor Freight T ools Co. makes every ef fort to assure that its products meet high quality and durabili.
An important point after buying a device Harbor Freight Tools 98733 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 98733 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 98733 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 98733 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 98733 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 98733, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 98733.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 98733. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 98733 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
