Instruction/ maintenance manual of the product 44923 Harbor Freight Tools
Go to page of 10
BRAD NAILER / ST APLER 2-IN-1 KIT ASSEMBL Y AND OPERA TION INSTR UCTIONS Model 44923 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at http://www .harborfreight.com Cop yright © 2001, 2004 by Harbor F reight T ools ® . All rights reser v ed.
SKU 44923 Page 2 For technical questions, please call 1-800-444-3353. Specifications Safety W arnings and Precautions W ARNING: When using tool, basic safety precautions should al ways be followed to reduce the risk of personal injury and damage to equipment.
SKU 44923 Page 3 For technical questions, please call 1-800-444-3353. 8. Use eye and ear protection . Always wear ANSI approved impact safety goggles and appropriate hear ing protection. W ear a full f ace shield if y ou are producing metal filings or wood chips .
SKU 44923 Page 4 For technical questions, please call 1-800-444-3353. panel fuse to break. If this happens, either use the compressor without an extension cord or find a larger amperage circuit to use. 19. Maintenance . The maintenance outlined in the maintenance section should be perf or med regularly .
SKU 44923 Page 5 For technical questions, please call 1-800-444-3353. T esting the Double T rigger Safety Mechanism W arning: Even though the nailer should be empty during this procedure, AL W A YS point the nailer at a piece of scrap wood when testing.
SKU 44923 Page 6 For technical questions, please call 1-800-444-3353. Loading Staples AL WA YS WEAR ANSI APPRO VED IMP A CT SAFETY GOGGLES WHEN RELO ADING OR DOING ANY O THER MAINTENANCE ON THIS T OOL. Other people in the work area must also wear ANSI approved impact safety goggles.
SKU 44923 Page 7 For technical questions, please call 1-800-444-3353. Operating the Nailer 1 . Attach the Nailer to the air supply at the Air Inlet (122). Star t your compressor and chec k the pressure making sure it is set at the recommended 60-100 PSI and not to go over the maximum 100 PSI.
SKU 44923 Page 8 For technical questions, please call 1-800-444-3353. 5 . Inspect the Driver (114) for bends or breakage - see Figure 10. If it is not fully retracted or damaged, do not use the tool until it is repaired by a qualified technician. 6 . Lightly oil the Driver (114) and replace Driver Guide Cover C (233).
SKU 44923 Page 9 For technical questions, please call 1-800-444-3353. NO TE : Some parts are listed and shown f or illustration pur poses only and are not av ailable individually as replacement par ts.
SKU 44923 Page 10 For technical questions, please call 1-800-444-3353. Assembly Drawing.
An important point after buying a device Harbor Freight Tools 44923 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 44923 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 44923 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 44923 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 44923 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 44923, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 44923.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 44923. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 44923 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
