Instruction/ maintenance manual of the product 46309 Harbor Freight Tools
Go to page of 10
AIR BRAD NAILER ASSEMBL Y and OPERA TING INSTR UCTIONS Model 46309 ® 3491 Mission Oaks Blvd., Camar illo , CA 93011 Visit our W eb site at http://www .
SKU 46309 Page 2 For technical questions, please call 1-800-444-3353. Brad Size .039-.042” Shank (18 Gauge), 3/8” to 2” long Magazine Capacity 10 0 Operating PSI 55-95 PSI Air Inlet Size 1/4” .
SKU 46309 Page 3 For technical questions, please call 1-800-444-3353. 8. Use eye and ear protection . Always wear ANSI approved impact safety goggles and appropriate hearing protection. W ear a full f ace shield if y ou are producing metal filings or wood chips.
SKU 46309 Page 4 For technical questions, please call 1-800-444-3353. panel fuse to break. If this happens, either use the compressor without an extension cord or find a larger amperage circuit to use. 19. Maintenance . The maintenance outlined in the maintenance section should be perfor med regular ly .
SKU 46309 Page 5 For technical questions, please call 1-800-444-3353. T esting the Full Sequential Saf ety T rip Mec hanism W arning: Even though the nailer should be empty during this procedure, AL W A YS point the nailer at a piece of scrap wood when testing.
SKU 46309 Page 6 For technical questions, please call 1-800-444-3353. Operating the Nailer 1. Attach the Nailer to the air supply at the Air Inlet (38) . Star t y our compressor and chec k the pressure making sure it is set at the recommended 55-95 PSI and not to go over the maximum 95 PSI.
SKU 46309 Page 7 For technical questions, please call 1-800-444-3353. An ytime an y maintenance or repair s are done (inc luding c learing jams), FIRST : 1.
SKU 46309 Page 8 For technical questions, please call 1-800-444-3353. An ytime an y maintenance or repair s are done , FIRST : 1. Disconnect the Nailer from the air hose. 2. Empty the Magazine (60) completely . 3. Attempt to fire the Nailer into a piece of scrap wood to ensure that it is disconnected and is incapable of firing any brads.
SKU 46309 Page 9 For technical questions, please call 1-800-444-3353. NO TE : Some par ts are listed and show n f or illustration purposes only and are not availabl e individually as replacement par t s .
SKU 46309 Page 10 For technical questions, please call 1-800-444-3353. Assembly Drawing Maintenance W arning! Alw ays disconnect the tool from the air compressor and then empty the magazine of nails bef ore attempting to inspect or perform maintenance to the Nailer .
An important point after buying a device Harbor Freight Tools 46309 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 46309 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 46309 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 46309 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 46309 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 46309, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 46309.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 46309. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 46309 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
