Instruction/ maintenance manual of the product 93820 Harbor Freight Tools
Go to page of 14
SUBMERSIBLE DIRTY W A TER PUMP Model 93819 - 1 HP Model 93820 - 1.2 HP ASSEMBL Y AND OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our W eb site at: http://www .harborfreight.com Copyright © 2006 by Harbor Freight T ools ® .
SKU 93819 For technical questions, please call 1-800-444-3353 P AGE 2 93820 PRODUCT SPECIFICA TIONS SA VE THIS MANUAL Y ou will need this manual for the safety warnings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
SKU 93819 For technical questions, please call 1-800-444-3353 P AGE 3 93820 2. Do not operate power tools in explosive atmospheres, such as in the presence of ammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
SKU 93819 For technical questions, please call 1-800-444-3353 P AGE 4 93820 9. Dress properly . Do not wear loose clothing or jewelry . Contain long hair . Keep your hair , clothing, and gloves away from moving parts. Loose clothes, jewelry , or long hair can be caught in moving parts.
SKU 93819 For technical questions, please call 1-800-444-3353 P AGE 5 93820 3. Use the right product for the job. There are certain applications for which this product was designed. Do not use small tools, attachments, or equipment to do the work of larger industrial tools, attachments, or equipment.
SKU 93819 For technical questions, please call 1-800-444-3353 P AGE 6 93820 GROUNDING W ARNING! Imp roper ly con necti ng the groun ding w ire ca n resu lt in th e risk of ele ctric shock . Chec k with a qualied electrician if you are in doubt as to whether the outlet is properly grounded.
SKU 93819 For technical questions, please call 1-800-444-3353 P AGE 7 93820 GROUNDED TOOLS: T OOLS WITH THREE PRONG PLUGS 1. T ools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet.
SKU 93819 For technical questions, please call 1-800-444-3353 P AGE 8 93820 FIGURE D SYMBOLOGY UNP ACKING When unpacking, check to make sure all the parts shown on the Parts List on page 12 are included. If any parts are missing or broken, please call Harbor Freight T ools at the number shown on the cover of this manual as soon as possible.
SKU 93819 For technical questions, please call 1-800-444-3353 P AGE 9 93820 4. Connect the Union (37) to the Coupler (34). Make sure to hand tighten only . Over-tightening may cause the Union to crack. Then, connect a 1-1/2” diam- eter Discharge Pipe to the Union.
SKU 93819 For technical questions, please call 1-800-444-3353 P AGE 10 93820 7. Carefully set the Pump in place. Do not lower or raise the Pump by its Power Cord (1) or Discharge Pipe. (See Figure E.) 8. The Float Switch (2) automatically switches on and off at a water depth of ap- proximately 4 inches.
SKU 93819 For technical questions, please call 1-800-444-3353 P AGE 1 1 93820 or Impeller (25) will greatly reduce performance of the Pump. T o clean the Impel- ler Cover (32), spray the Cover with clean water . T o clean the Impeller , remove the three T apping Screws (39) at the bottom of the Base (38).
SKU 93819 For technical questions, please call 1-800-444-3353 P AGE 12 93820 P ARTS LIST NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
SKU 93819 For technical questions, please call 1-800-444-3353 P AGE 13 93820 ASSEMBL Y DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
SKU 93819 For technical questions, please call 1-800-444-3353 P AGE 14 93820 LIMITED 1 YEAR / 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quali.
An important point after buying a device Harbor Freight Tools 93820 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 93820 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 93820 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 93820 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 93820 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 93820, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 93820.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 93820. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 93820 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
