Instruction/ maintenance manual of the product 66902 Harbor Freight Tools
Go to page of 16
2-IN-1 FINISH NAILER/ST APLER Model 66902 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2009 by Harbor Freight T ools ® .
SKU 66902 For technical questions, please call 1-800-444-3353. Page 2 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures.
SKU 66902 For technical questions, please call 1-800-444-3353. Page 3 tool. Distractions are able to result in the loss of control of the tool. Personal safety Stay alert. Watch what you are do- a. ing and use common sense when operating the tool. Do not use the tool while tired or under the inu - ence of drugs, alcohol, or medica- tion.
SKU 66902 For technical questions, please call 1-800-444-3353. Page 4 with the trigger is dangerous and must be repaired. Disconnect the tool from the air d. source before making adjust- ments, doing tool maintenance, clearing jams, touching the safety , leaving work area, loading, or un- loading the tool.
SKU 66902 For technical questions, please call 1-800-444-3353. Page 5 SYMBOLS AND SPECIFIC SAFETY INSTRUCTIONS Symbol Denitions Symbol Property or statement PSI Pounds per square inch of pressure C.
SKU 66902 For technical questions, please call 1-800-444-3353. Page 6 Fire fasteners into an appropriate 14. work surface only . Do not attempt to re fasteners into surfaces too hard to penetrate. Do not drive fasteners on top of other fasteners, or at too steep of an angle.
SKU 66902 For technical questions, please call 1-800-444-3353. Page 7 rst be examined by a doctor and then have regular medical check- ups to ensure medical problems are not being caused or worsened from use.
SKU 66902 For technical questions, please call 1-800-444-3353. Page 8 Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Unpacking When unpacking, make sure item is intact and undamaged.
SKU 66902 For technical questions, please call 1-800-444-3353. Page 9 Adjust the air compressor ’s output 7. regulator so that the air output is enough to properly power the tool, but the output will not exceed the tool’s maximum air pressure at any time.
SKU 66902 For technical questions, please call 1-800-444-3353. Page 10 Full Sequential Safety T rip Mechanism T esting Procedure TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: Empty the tool before this procedure. Point the tool at a piece of scrap wood when testing.
SKU 66902 For technical questions, please call 1-800-444-3353. Page 1 1 Insert the required size Fasteners 3. (3/4” - 2” L 16-gauge Brad Nails or 1/2” - 1-1/2” L18-gauge Crown Nar- row Staples) into the Magazine. Slide the Magazine back into place 4.
SKU 66902 For technical questions, please call 1-800-444-3353. Page 12 • Wear ANSI-approved safety goggles with side shields. Other people in the work area must also wear ANSI-approved impact safety goggles. Release the trigger . • Detach the air supply .
SKU 66902 For technical questions, please call 1-800-444-3353. Page 13 T roubleshooting Problem Possible Causes Likely Solutions Insufcient fastener depth. Incorrect tool depth setting. 1. Not enough air pressure. 2. Incorrect lubrication or not 3.
SKU 66902 For technical questions, please call 1-800-444-3353. Page 14 Part Description Q’ty 1 Shoulder Screw 1 2 Exhaust Deector 1 3 O-Ring 1 4 Spring W asher 4 5 Hex Bolt 4 6 Head Cap 1 7 O-Rin.
SKU 66902 For technical questions, please call 1-800-444-3353. Page 15 ASSEMBL Y DIAGRAM PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS LIST AND ASSEMBL Y DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
SKU 66902 For technical questions, please call 1-800-444-3353. Page 16 LIMITED 1 YEAR W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durabilit.
An important point after buying a device Harbor Freight Tools 66902 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 66902 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 66902 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 66902 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 66902 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 66902, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 66902.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 66902. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 66902 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
