Instruction/ maintenance manual of the product 40070 Harbor Freight Tools
Go to page of 12
HAND FINISHING ORBIT AL SANDER ASSEMBL Y AND OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at http://www .
Page 2 SKU 40070 For technical questions, please call 1-800-444-3353. SA VE THIS MANU AL Y ou will need this manual f or the safety warnings and precautions, assembl y , operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Page 3 SKU 40070 For technical questions, please call 1-800-444-3353. ELECTRICAL SAFETY 4. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in an y way .
Page 4 SKU 40070 For technical questions, please call 1-800-444-3353. 14. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations. 15. Use safety equipment.
Page 5 SKU 40070 For technical questions, please call 1-800-444-3353. SPECIFIC SAFETY RULES 1. Maintain labels and nameplates on the Sander . These carr y impor tant information. If unreadable or missing, contact Harbor F reight T ools f or a replacement.
Page 6 SKU 40070 For technical questions, please call 1-800-444-3353. and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic par ticles. (California Health & Safety Code § 25249.5, et seq.
Page 7 SKU 40070 For technical questions, please call 1-800-444-3353. wire connected to the tool’ s grounding system and must ne v er be attached to an electrically “live” terminal. (See Figure A.) 3. Y our tool must be plugged into an appropr iate outlet, proper ly installed and grounded in accordance with all codes and ordinances.
Page 8 SKU 40070 For technical questions, please call 1-800-444-3353. EXTENSION CORDS 1. Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. 2 . As the distance from the supply outlet increases, you must use a heavier gauge extension cord.
Page 9 SKU 40070 For technical questions, please call 1-800-444-3353. SYMBOLOGY UNP A CKING When unpacking, chec k to make sure that the item is intact and undamaged. If any par ts are missing or broken, please call Harbor F reight T ools at the number shown on the co ver of this manual as soon as possible.
Page 10 SKU 40070 For technical questions, please call 1-800-444-3353. ATT A CHING SANDP APER T O THE BA CKING PAD (28) 1. Press the tab on the Clamps (6) inward on both sides of the unit and swing the clamps on both sides up , out, and down. See 1 & 2 , right.
Page 11 SKU 40070 For technical questions, please call 1-800-444-3353. INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Make sure the P ower Switch (3) of the Sander is in its “OFF” position and that the tool is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
Page 12 SKU 40070 For technical questions, please call 1-800-444-3353. ASSEMBL Y DIA GRAM NO TE: Some par ts are listed and shown for illustr ation purposes only , and are not av ailable individu- ally as replacement par ts. Part 0 - Dust Collection Chute - not shown.
An important point after buying a device Harbor Freight Tools 40070 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 40070 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 40070 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 40070 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 40070 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 40070, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 40070.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 40070. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 40070 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
